[U-Boot] [PATCH 4/8] board: ge: bx50v3: make USB support optional and disabled by default

[Andrew Shadura]

The USB support is only useful for development and shouldn't be enabled
in production, so it has to be disabled in U-boot by default.

Signed-off-by: Andrew Shadura <andrew.shadura at collabora.co.uk>
---
 configs/ge_b450v3_defconfig |  2 --
 configs/ge_b650v3_defconfig |  2 --
 configs/ge_b850v3_defconfig |  2 --
 include/configs/ge_bx50v3.h | 24 +++++++++++++++++-------
 4 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig
index ffa0440..98bf52e 100644
--- a/configs/ge_b450v3_defconfig
+++ b/configs/ge_b450v3_defconfig
@@ -8,8 +8,6 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig
index b039c24..b66c98b 100644
--- a/configs/ge_b650v3_defconfig
+++ b/configs/ge_b650v3_defconfig
@@ -8,8 +8,6 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig
index d9c8acd..1cd126a 100644
--- a/configs/ge_b850v3_defconfig
+++ b/configs/ge_b850v3_defconfig
@@ -8,8 +8,6 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 53f8689..602763f 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -78,6 +78,7 @@
 #define CONFIG_DOS_PARTITION
 
 /* USB Configs */
+#ifdef CONFIG_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_STORAGE
@@ -99,6 +100,7 @@
 #define CONFIG_G_DNL_VENDOR_NUM   0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM  0xa4a5
 #define CONFIG_G_DNL_MANUFACTURER "Advantech"
+#endif
 
 /* Networking Configs */
 #define CONFIG_FEC_MXC
@@ -221,13 +223,7 @@
 			"bootm; " \
 		"fi;\0" \
 
-#define CONFIG_BOOTCOMMAND \
-	"usb start; " \
-	"setenv dev usb; " \
-	"setenv devnum 0; " \
-	"setenv rootdev sda1; " \
-	"run tryboot; " \
-	\
+#define CONFIG_MMCBOOTCOMMAND \
 	"setenv dev mmc; " \
 	"setenv rootdev mmcblk0p1; " \
 	\
@@ -241,9 +237,23 @@
 	"if mmc dev ${devnum}; then " \
 		"run tryboot; " \
 	"fi; " \
+
+#define CONFIG_USBBOOTCOMMAND \
+	"usb start; " \
+	"setenv dev usb; " \
+	"setenv devnum 0; " \
+	"setenv rootdev sda1; " \
+	"run tryboot; " \
 	\
+	CONFIG_MMCBOOTCOMMAND \
 	"bmode usb; " \
 
+#ifdef CONFIG_CMD_USB
+#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
+#else
+#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
+#endif
+
 #define CONFIG_ARP_TIMEOUT     200UL
 
 /* Miscellaneous configurable options */
-- 
2.7.4