[U-Boot] [PATCH] powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache

[York Sun]

On 04/18/2016 05:16 AM, Aneesh Bansal wrote:
> While enabling L2 cache, the value of L2PE (L2 cache parity/ECC
> error checking enable) must not be changed while the L2 cache is
> enabled.
> So, L2PE must be set before enabling L2 cache.
> 
> Signed-off-by: Aneesh Bansal <aneesh.bansal at nxp.com>
> ---
>  arch/powerpc/cpu/mpc85xx/start.S | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)


Applied to u-boot-mpc85xx master branch, awaiting upstream.

Thanks.

York