[U-Boot] [PATCH v1 0/5] at91: add DM and DTS support for the at91 based siemens boards.

[Heiko Schocher]

This patchset adds DM / DTS support for the siemens at91 based
boards.

No special patches here, just based on the AT91 DM patches
from Simon:
[U-Boot,v2,01/18] at91: Add support for the AT91 slow clock controller
http://patchwork.ozlabs.org/patch/618949/
[U-Boot,v2,02/18] arm: Allow skipping of low-level init with I-cache on
http://patchwork.ozlabs.org/patch/618951/
[U-Boot,v2,03/18] bootm: Align cache flush end address correctly
http://patchwork.ozlabs.org/patch/618950/
[U-Boot,v2,04/18] net: Handle an empty bootp extension section
http://patchwork.ozlabs.org/patch/618953/
[U-Boot,v2,05/18] net: macb: Prepare for driver-model conversion
http://patchwork.ozlabs.org/patch/618954/
[U-Boot,v2,06/18] net: macb: Flush correct cache portion when sending
http://patchwork.ozlabs.org/patch/618952/
[U-Boot,v2,07/18] net: macb: Convert to driver model
http://patchwork.ozlabs.org/patch/618956/
[U-Boot,v2,08/18] arm: at91: dts: Bring in device tree file for AT91SAM9G45
http://patchwork.ozlabs.org/patch/618960/
[U-Boot,v2,09/18] arm: at91: Add a header file for the real-time clock
http://patchwork.ozlabs.org/patch/618958/
[U-Boot,v2,10/18] at91: Correct NAND ECC register access
http://patchwork.ozlabs.org/patch/618955/
[U-Boot,v2,11/18] at91: nand: Set up the ECC strength correctly
http://patchwork.ozlabs.org/patch/618957/
[U-Boot,v2,12/18] mtd: nand: Drop a blank line in nand_wait()
http://patchwork.ozlabs.org/patch/618961/
[U-Boot,v2,13/18] at91: Add driver-model GPIO devices for AT91SAM9G45
http://patchwork.ozlabs.org/patch/618959/
[U-Boot,v2,14/18] at91: mtd: nand: Add dev_warn() to correct build error in driver
http://patchwork.ozlabs.org/patch/618962/

and pulled in from linux some dtsi files. And added the DTS
files for the siemens at91 boards.

Heiko Schocher (5):
  arm: at91: add CONFIG_AT91SAM9M10G45
  corvus DTS / DM support
  arm: at91: dts: Bring in dts files for AT91SAM9G20 and SAM9260
  arm: at91: smartweb: add DM and DTS support
  arm: at91: taurus/axm: add DM and DTS support

 arch/arm/dts/Makefile                         |    4 +-
 arch/arm/dts/at91sam9260-smartweb.dts         |  110 +++
 arch/arm/dts/at91sam9260.dtsi                 | 1034 +++++++++++++++++++++++++
 arch/arm/dts/at91sam9261.dtsi                 |  876 +++++++++++++++++++++
 arch/arm/dts/at91sam9263.dtsi                 | 1034 +++++++++++++++++++++++++
 arch/arm/dts/at91sam9g20-taurus.dts           |  119 +++
 arch/arm/dts/at91sam9g20.dtsi                 |   68 ++
 arch/arm/dts/at91sam9g45-corvus.dts           |  108 +++
 arch/arm/mach-at91/Kconfig                    |   12 +
 arch/arm/mach-at91/include/mach/at91_matrix.h |   26 +-
 board/siemens/corvus/board.c                  |   41 +-
 board/siemens/smartweb/smartweb.c             |   32 +-
 board/siemens/taurus/taurus.c                 |   25 +
 configs/axm_defconfig                         |    5 +-
 configs/corvus_defconfig                      |    8 +
 configs/smartweb_defconfig                    |    7 +-
 configs/taurus_defconfig                      |    5 +-
 include/configs/corvus.h                      |    2 +-
 include/configs/smartweb.h                    |    6 +-
 include/configs/taurus.h                      |    2 +-
 20 files changed, 3492 insertions(+), 32 deletions(-)
 create mode 100644 arch/arm/dts/at91sam9260-smartweb.dts
 create mode 100644 arch/arm/dts/at91sam9260.dtsi
 create mode 100644 arch/arm/dts/at91sam9261.dtsi
 create mode 100644 arch/arm/dts/at91sam9263.dtsi
 create mode 100644 arch/arm/dts/at91sam9g20-taurus.dts
 create mode 100644 arch/arm/dts/at91sam9g20.dtsi
 create mode 100644 arch/arm/dts/at91sam9g45-corvus.dts

-- 
2.5.5