[U-Boot] [PATCH v3] armv8/ls2080a: configure PMU's PCTBENR to enable WDT

[York Sun]

Leo,

Did you type anything? I don't see any comment on top, or inline.

York


On 05/27/2016 11:34 AM, Leo Li wrote:
> On Tue, May 17, 2016 at 10:44 AM, York Sun <york.sun at nxp.com> wrote:
>> On 05/16/2016 08:28 PM, Yunhui Cui wrote:
>>> Hi York,
>>>
>>>  I think you can move your code into timer_init() in cpu.c and follow the example of cltbenr.
>>> [Yunhui] During the u_boot imamge compiled by using the ls2080ardb_defconfig bootup on ls2080ardb, timer_init() cannot be called ...
>>>          So maybe cannot move the code to timer_init().
>>
>>
>> Yunhui,
>>
>> First, please reply inline. This is how we do review in the mailing list.
>>
>> Second, please check your code again. Function timer_init() must be called. You
>> cannot get away from it. Otherwise, you don't have a general timer and all delay
>> functions fail.
>>
>> York
>>
>>>
>>>> -----Original Message-----
>>>> From: York Sun [mailto:york.sun at nxp.com]
>>>> Sent: Tuesday, May 17, 2016 12:14 AM
>>>> To: Yunhui Cui
>>>> Cc: u-boot at lists.denx.de; Yunhui Cui; Prabhakar Kushwaha
>>>> Subject: Re: [PATCH v3] armv8/ls2080a: configure PMU's PCTBENR to enable
>>>> WDT
>>>>
>>>> On 04/14/2016 08:57 PM, Yunhui Cui wrote:
>>>>> From: Yunhui Cui <yunhui.cui at nxp.com>
>>>>>
>>>>> The SP805-WDT module on LS2080A and LS2085A, requires configuration of
>>>>> PMU's PCTBENR register to enable watchdog counter decrement and reset
>>>>> signal generation. In order not to affect the sp805wdt driver frame,
>>>>> we enable the watchdog clk in advance.
>>>>>
>>>>> Signed-off-by: Yunhui Cui <yunhui.cui at nxp.com>
>>>>> ---
>>>>>  arch/arm/cpu/armv8/fsl-layerscape/soc.c           | 15 +++++++++++++++
>>>>>  arch/arm/include/asm/arch-fsl-layerscape/config.h |  4 ++++
>>>>>  arch/arm/include/asm/arch-fsl-layerscape/soc.h    |  1 +
>>>>>  board/freescale/ls2080aqds/ls2080aqds.c           |  2 ++
>>>>>  board/freescale/ls2080ardb/ls2080ardb.c           |  2 ++
>>>>>  5 files changed, 24 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
>>>>> b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
>>>>> index 0cb0100..c36976d 100644
>>>>> --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
>>>>> +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
>>>>> @@ -42,6 +42,21 @@ bool soc_has_aiop(void)
>>>>>     return false;
>>>>>  }
>>>>>
>>>>> +#if defined(CONFIG_LS2080A)
>>>>> +/*
>>>>> + * In certain Layerscape SoCs, the clock for each core's watchdog
>>>>> + * has an enable bit in the PMU Physical Core Time Base Enable
>>>>> +Register
>>>>> + * (PCTBENR), which allows the watchdog to operate.
>>>>> + */
>>>>> +void enable_watchdog_clk(void)
>>>>> +{
>>>>> +   u32 pmu_val;
>>>>> +
>>>>> +   pmu_val = *(u32 *)(FSL_PMU_REG_BASE + FSL_PMU_PCTBENR_OFFSET);
>>>>> +   *(u32 *)(FSL_PMU_REG_BASE + FSL_PMU_PCTBENR_OFFSET) = pmu_val |
>>>>> +0xff; } #endif
>>>>> +
>>>>>  #ifdef CONFIG_LS2080A
>>>>>  /*
>>>>>   * This erratum requires setting a value to eddrtqcr1 to diff --git
>>>>> a/arch/arm/include/asm/arch-fsl-layerscape/config.h
>>>>> b/arch/arm/include/asm/arch-fsl-layerscape/config.h
>>>>> index 10d17b2..62e4f95 100644
>>>>> --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
>>>>> +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
>>>>> @@ -143,6 +143,10 @@
>>>>>  #define CONFIG_ARM_ERRATA_829520
>>>>>  #define CONFIG_ARM_ERRATA_833471
>>>>>
>>>>> +/* PMU-Physical Core Time Base Enable Register */
>>>>> +#define FSL_PMU_REG_BASE   0x1E30000
>>>>> +#define FSL_PMU_PCTBENR_OFFSET     0x8A0
>>>>> +
>>>>>  #elif defined(CONFIG_LS1043A)
>>>>>  #define CONFIG_MAX_CPUS                            4
>>>>>  #define CONFIG_SYS_CACHELINE_SIZE          64
>>>>> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
>>>>> b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
>>>>> index 831d817..bd4a8f1 100644
>>>>> --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
>>>>> +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
>>>>> @@ -91,6 +91,7 @@ void fsl_lsch2_early_init_f(void);  #endif
>>>>>
>>>>>  void cpu_name(char *name);
>>>>> +void enable_watchdog_clk(void);
>>>>>  #ifdef CONFIG_SYS_FSL_ERRATUM_A009635  void erratum_a009635(void);
>>>>> #endif diff --git a/board/freescale/ls2080aqds/ls2080aqds.c
>>>>> b/board/freescale/ls2080aqds/ls2080aqds.c
>>>>> index b3bd40a..c109349 100644
>>>>> --- a/board/freescale/ls2080aqds/ls2080aqds.c
>>>>> +++ b/board/freescale/ls2080aqds/ls2080aqds.c
>>>>> @@ -213,6 +213,8 @@ int board_init(void)
>>>>>     select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
>>>>>     rtc_enable_32khz_output();
>>>>>
>>>>> +   enable_watchdog_clk();
>>>>> +
>>>>>     return 0;
>>>>>  }
>>>>>
>>>>> diff --git a/board/freescale/ls2080ardb/ls2080ardb.c
>>>>> b/board/freescale/ls2080ardb/ls2080ardb.c
>>>>> index fb39af6..7872f1f 100644
>>>>> --- a/board/freescale/ls2080ardb/ls2080ardb.c
>>>>> +++ b/board/freescale/ls2080ardb/ls2080ardb.c
>>>>> @@ -181,6 +181,8 @@ int board_init(void)
>>>>>     /* invert AQR405 IRQ pins polarity */
>>>>>     out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK);
>>>>>
>>>>> +   enable_watchdog_clk();
>>>>> +
>>>>>     return 0;
>>>>>  }
>>>>>
>>>>>
>>>> Yunhui,
>>>>
>>>> I think you can move your code into timer_init() in cpu.c and follow the
>>>> example of cltbenr.
>>>>
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 
>