[U-Boot] [PATCH] verified-boot: Minimal support for booting U-Boot proper from SPL
Sumit Garg
sumit.garg at nxp.com
Mon May 30 07:32:33 CEST 2016
Can you make this support more generic as you have used only CONFIG_SPL_FIT_SIGNATURE for SPL verified boot while our platforms doesn't use fit signature approach for verification?
May be you can use CONFIG_SPL_VERIFIED_BOOT?
> -----Original Message-----
> From: Teddy Reed [mailto:teddy.reed at gmail.com]
> Sent: Sunday, May 29, 2016 7:28 AM
> To: u-boot at lists.denx.de
> Cc: sjg at chromium.org; dannenberg at ti.com; Sumit Garg
> <sumit.garg at nxp.com>
> Subject: [PATCH] verified-boot: Minimal support for booting U-Boot proper
> from SPL
>
> This allows a board to configure verified boot within the SPL using a FIT or FIT
> with external data. It also allows the SPL to perform signature verification
> without needing relocation.
>
> The board configuration will need to add the following feature defines:
> CONFIG_SPL_CRYPTO_SUPPORT
> CONFIG_SPL_HASH_SUPPORT
> CONFIG_SPL_SHA256
>
> In this example, SHA256 is the only selected hashing algorithm.
>
> And the following booleans:
> CONFIG_SPL=y
> CONFIG_SPL_DM=y
> CONFIG_SPL_LOAD_FIT=y
> CONFIG_SPL_FIT=y
> CONFIG_SPL_OF_CONTROL=y
> CONFIG_SPL_OF_LIBFDT=y
> CONFIG_SPL_FIT_SIGNATURE=y
>
> Signed-off-by: Teddy Reed <teddy.reed at gmail.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Andreas Dannenberg <dannenberg at ti.com>
> ---
> Kconfig | 11 +++++++++++
> common/Makefile | 1 +
> drivers/Makefile | 1 +
> drivers/crypto/rsa_mod_exp/mod_exp_sw.c | 1 +
> lib/Makefile | 9 ++++-----
> lib/rsa/Kconfig | 4 ++++
> lib/rsa/Makefile | 2 +-
> 7 files changed, 23 insertions(+), 6 deletions(-)
>
> diff --git a/Kconfig b/Kconfig
> index 4b46216..817f4f0 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -183,6 +183,11 @@ config FIT
> verified boot (secure boot using RSA). This option enables that
> feature.
>
> +config SPL_FIT
> + bool "Support Flattened Image Tree within SPL"
> + depends on FIT
> + depends on SPL
> +
> config FIT_VERBOSE
> bool "Display verbose messages on FIT boot"
> depends on FIT
> @@ -205,6 +210,12 @@ config FIT_SIGNATURE
> format support in this case, enable it using
> CONFIG_IMAGE_FORMAT_LEGACY.
>
> +config SPL_FIT_SIGNATURE
> + bool "Enable signature verification of FIT firmware within SPL"
> + depends on SPL_FIT
> + depends on SPL_DM
> + select SPL_RSA
> +
> config FIT_BEST_MATCH
> bool "Select the best match for the kernel device tree"
> depends on FIT
> diff --git a/common/Makefile b/common/Makefile index 0562d5c..e6b0c22
> 100644
> --- a/common/Makefile
> +++ b/common/Makefile
> @@ -93,6 +93,7 @@ obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o endif #
> !CONFIG_SPL_BUILD
>
> ifdef CONFIG_SPL_BUILD
> +obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
> obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
> obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
> obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o diff --git
> a/drivers/Makefile b/drivers/Makefile index 99dd07f..772d437 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_$(SPL_)RAM) += ram/
>
> ifdef CONFIG_SPL_BUILD
>
> +obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
> obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
> obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
> obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
> diff --git a/drivers/crypto/rsa_mod_exp/mod_exp_sw.c
> b/drivers/crypto/rsa_mod_exp/mod_exp_sw.c
> index dc6c064..3817fb3 100644
> --- a/drivers/crypto/rsa_mod_exp/mod_exp_sw.c
> +++ b/drivers/crypto/rsa_mod_exp/mod_exp_sw.c
> @@ -32,6 +32,7 @@ U_BOOT_DRIVER(mod_exp_sw) = {
> .name = "mod_exp_sw",
> .id = UCLASS_MOD_EXP,
> .ops = &mod_exp_ops_sw,
> + .flags = DM_FLAG_PRE_RELOC,
> };
>
> U_BOOT_DEVICE(mod_exp_sw) = {
> diff --git a/lib/Makefile b/lib/Makefile index 02dfa29..0df5395 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -9,7 +9,6 @@ ifndef CONFIG_SPL_BUILD
>
> obj-$(CONFIG_EFI) += efi/
> obj-$(CONFIG_EFI_LOADER) += efi_loader/
> -obj-$(CONFIG_RSA) += rsa/
> obj-$(CONFIG_LZMA) += lzma/
> obj-$(CONFIG_LZO) += lzo/
> obj-$(CONFIG_ZLIB) += zlib/
> @@ -25,8 +24,6 @@ obj-y += crc8.o
> obj-y += crc16.o
> obj-$(CONFIG_ERRNO_STR) += errno_str.o
> obj-$(CONFIG_FIT) += fdtdec_common.o
> -obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o
> -obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec.o
> obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
> obj-$(CONFIG_GZIP) += gunzip.o
> obj-$(CONFIG_GZIP_COMPRESSED) += gzip.o @@ -39,9 +36,7 @@ obj-y +=
> net_utils.o
> obj-$(CONFIG_PHYSMEM) += physmem.o
> obj-y += qsort.o
> obj-y += rc4.o
> -obj-$(CONFIG_SHA1) += sha1.o
> obj-$(CONFIG_SUPPORT_EMMC_RPMB) += sha256.o
> -obj-$(CONFIG_SHA256) += sha256.o
> obj-y += strmhz.o
> obj-$(CONFIG_TPM) += tpm.o
> obj-$(CONFIG_RBTREE) += rbtree.o
> @@ -49,6 +44,10 @@ obj-$(CONFIG_BITREVERSE) += bitrev.o obj-y +=
> list_sort.o endif
>
> +obj-$(CONFIG_$(SPL_)RSA) += rsa/
> +obj-$(CONFIG_$(SPL_)SHA1) += sha1.o
> +obj-$(CONFIG_$(SPL_)SHA256) += sha256.o
> +
> obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/ ifdef CONFIG_SPL_OF_CONTROL
> obj-$(CONFIG_OF_LIBFDT) += libfdt/
> diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig index 86df0a0..09ec358 100644
> --- a/lib/rsa/Kconfig
> +++ b/lib/rsa/Kconfig
> @@ -13,6 +13,10 @@ config RSA
> option. The software based modular exponentiation is built into
> mkimage irrespective of this option.
>
> +config SPL_RSA
> + bool "Use RSA Library within SPL"
> + depends on RSA
> +
> if RSA
> config RSA_SOFTWARE_EXP
> bool "Enable driver for RSA Modular Exponentiation in software"
> diff --git a/lib/rsa/Makefile b/lib/rsa/Makefile index 6867e50..4b2c1ba 100644
> --- a/lib/rsa/Makefile
> +++ b/lib/rsa/Makefile
> @@ -7,5 +7,5 @@
> # SPDX-License-Identifier: GPL-2.0+
> #
>
> -obj-$(CONFIG_FIT_SIGNATURE) += rsa-verify.o rsa-checksum.o
> +obj-$(CONFIG_$(SPL_)FIT_SIGNATURE) += rsa-verify.o rsa-checksum.o
> obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
> --
> 2.7.4
More information about the U-Boot
mailing list