[U-Boot] [PATCH 2/6] mips: ath79: ap121: Enable ethernet

Wills Wang wills.wang at live.com
Mon May 30 16:54:51 CEST 2016


This patch enable network function for ap121 board.

Signed-off-by: Wills Wang <wills.wang at live.com>
Acked-by: Marek Vasut <marex at denx.de>
---

 arch/mips/dts/ap121.dts   | 5 +++++
 arch/mips/dts/ar933x.dtsi | 4 ++--
 board/qca/ap121/ap121.c   | 2 ++
 configs/ap121_defconfig   | 9 +++++++--
 4 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts
index e31f601..a934a58 100644
--- a/arch/mips/dts/ap121.dts
+++ b/arch/mips/dts/ap121.dts
@@ -41,3 +41,8 @@
 		reg = <0>;
 	};
 };
+
+&gmac0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
index 00896b2..971f13e 100644
--- a/arch/mips/dts/ar933x.dtsi
+++ b/arch/mips/dts/ar933x.dtsi
@@ -75,7 +75,7 @@
 			};
 
 			gmac0: eth at 0x19000000 {
-				compatible = "qca,ag7240-mac";
+				compatible = "qca,ag933x-mac";
 				reg = <0x19000000 0x200>;
 				phy = <&phy0>;
 				phy-mode = "rmii";
@@ -92,7 +92,7 @@
 			};
 
 			gmac1: eth at 0x1a000000 {
-				compatible = "qca,ag7240-mac";
+				compatible = "qca,ag933x-mac";
 				reg = <0x1a000000 0x200>;
 				phy = <&phy0>;
 				phy-mode = "rgmii";
diff --git a/board/qca/ap121/ap121.c b/board/qca/ap121/ap121.c
index d6c60fe..e245faa 100644
--- a/board/qca/ap121/ap121.c
+++ b/board/qca/ap121/ap121.c
@@ -10,6 +10,7 @@
 #include <asm/types.h>
 #include <mach/ar71xx_regs.h>
 #include <mach/ddr.h>
+#include <mach/ath79.h>
 #include <debug_uart.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -46,5 +47,6 @@ int board_early_init_f(void)
 	debug_uart_init();
 #endif
 	ddr_init();
+	ath79_eth_reset();
 	return 0;
 }
diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
index 7604e2e..91fa734 100644
--- a/configs/ap121_defconfig
+++ b/configs/ap121_defconfig
@@ -19,8 +19,13 @@ CONFIG_SYS_PROMPT="ap121 # "
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 # CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
+CONFIG_CMD_NET=y
+CONFIG_CMD_NFS=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_ETH=y
+CONFIG_AG7XXX=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_ATMEL=y
-- 
1.9.1



More information about the U-Boot mailing list