[U-Boot] [U-Boot,v2,5/8] board: AM335x-ICEv2: Add cpsw support

[Tom Rini]

On Mon, May 16, 2016 at 11:47:26AM +0530, Lokesh Vutla wrote:

> In order to enable cpsw on AM335x ICEv2 board, the following needs to be done:
> 
> 1)There are few on board jumper settings which gives a choice between
> cpsw and PRUSS, that needs to be properly selected[1]. Even after selecting
> this, there are few GPIOs which control these muxes that needs to be held high.
> 
> 2) The clock to PHY is provided by a PLL-based clock synthesizer[2] connected
> via I2C. This needs to properly programmed and locked for PHY operation.
> And PHY needs to be reset before before being used, which is also held by
> a GPIO.
> 
> 3) RMII mode needs to be selected.
> 
> [1] http://www.ti.com/lit/zip/tidr336
> [2] http://www.ti.com/lit/ds/symlink/cdce913.pdf
> 
> Reviewed-by: Tom Rini <trini at konsulko.com>
> Acked-by: Mugunthan V N <mugunthanvnm at ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160530/dd8ecdee/attachment.sig>