[U-Boot] [bug report] sunxi: booting from eMMC
AneoX
aneox.inbox at gmail.com
Sun Oct 2 19:15:40 CEST 2016
Like a sd card. I have emmc to sd adapter, so
dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8
and then just solder emmc to my board.
2 окт. 2016 г. 23:08 пользователь "Jagan Teki" <jagannadh.teki at gmail.com>
написал:
On Sun, Oct 2, 2016 at 7:13 PM, Alexandr Bochkarev
<aneox.inbox at gmail.com> wrote:
> Already tried. The same output:
>
> mmc_load_image_raw_sector: mmc block read error
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
Need few more info, how exactly you wrote SPL on emmc, could you provide
that.
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list