[U-Boot] [PATCH v2 4/9] MIPS: factor out code for initial stack and global data

Daniel Schwierzeck daniel.schwierzeck at gmail.com
Mon Oct 3 19:51:25 CEST 2016


Move the code for setting up the initial stack and global data
to a macro to be able to use it more than once.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---

Changes in v2: None

 arch/mips/cpu/start.S | 56 +++++++++++++++++++++++++++------------------------
 1 file changed, 30 insertions(+), 26 deletions(-)

diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index 82d6e9f..d426b67 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -52,6 +52,34 @@
 	sdbbp	1		# Invoke UHI operation
 	.endm
 
+	.macro setup_stack_gd
+	li	t0, -16
+	PTR_LI	t1, CONFIG_SYS_INIT_SP_ADDR
+	and	sp, t1, t0		# force 16 byte alignment
+	PTR_SUBU \
+		sp, sp, GD_SIZE		# reserve space for gd
+	and	sp, sp, t0		# force 16 byte alignment
+	move	k0, sp			# save gd pointer
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+	li	t2, CONFIG_SYS_MALLOC_F_LEN
+	PTR_SUBU \
+		sp, sp, t2		# reserve space for early malloc
+	and	sp, sp, t0		# force 16 byte alignment
+#endif
+	move	fp, sp
+
+	/* Clear gd */
+	move	t0, k0
+1:
+	PTR_S	zero, 0(t0)
+	blt	t0, t1, 1b
+	 PTR_ADDIU t0, PTRSIZE
+
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+	PTR_S	sp, GD_MALLOC_BASE(k0)	# gd->malloc_base offset
+#endif
+	.endm
+
 ENTRY(_start)
 	/* U-Boot entry point */
 	b	reset
@@ -228,32 +256,8 @@ wr_done:
 # endif
 #endif
 
-	/* Set up temporary stack */
-	li	t0, -16
-	PTR_LI	t1, CONFIG_SYS_INIT_SP_ADDR
-	and	sp, t1, t0		# force 16 byte alignment
-	PTR_SUBU \
-		sp, sp, GD_SIZE		# reserve space for gd
-	and	sp, sp, t0		# force 16 byte alignment
-	move	k0, sp			# save gd pointer
-#ifdef CONFIG_SYS_MALLOC_F_LEN
-	li	t2, CONFIG_SYS_MALLOC_F_LEN
-	PTR_SUBU \
-		sp, sp, t2		# reserve space for early malloc
-	and	sp, sp, t0		# force 16 byte alignment
-#endif
-	move	fp, sp
-
-	/* Clear gd */
-	move	t0, k0
-1:
-	PTR_S	zero, 0(t0)
-	blt	t0, t1, 1b
-	 PTR_ADDIU t0, PTRSIZE
-
-#ifdef CONFIG_SYS_MALLOC_F_LEN
-	PTR_S	sp, GD_MALLOC_BASE(k0)	# gd->malloc_base offset
-#endif
+	/* Set up initial stack and global data */
+	setup_stack_gd
 
 	move	a0, zero		# a0 <-- boot_flags = 0
 	PTR_LA	t9, board_init_f
-- 
2.10.0



More information about the U-Boot mailing list