[U-Boot] [PATCH] [PATCH 2/2] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1
Stephen Arnold
stephen.arnold42 at gmail.com
Mon Oct 3 22:21:28 CEST 2016
This is what I have now for send command:
git send-email --to=u-boot at lists.denx.de --confirm=always -M -1
--subject-prefix="PATCH v2" outgoing/*
Any u-boot-y tips are appreciated...
Steve
On Mon, Oct 3, 2016 at 1:19 PM, Stephen Arnold
<stephen.arnold42 at gmail.com> wrote:
> Okay, please disregard the update with double "PATCH" in the subject;
> I need to get better with git send-email (besides just the Google
> insecure app thing for gmail).
>
> I'm about to resend v2 with (hopefully) all the right stuff in it.
>
> Thanks, Steve
>
> On Mon, Oct 3, 2016 at 1:01 PM, Stephen Arnold
> <stephen.arnold42 at gmail.com> wrote:
>> From: Steve Arnold <stephen.arnold42 at gmail.com>
>>
>> * changes from lamobo-r1 required include:
>> - ahci power pin (remove)
>> - usbvbus pin config
>> - mmc pin config
>> - uart2 enable
>>
>> Signed-off-by: Steve Arnold <stephen.arnold42 at gmail.com>
>> ---
>> arch/arm/dts/Makefile | 1 +
>> arch/arm/dts/sun7i-a20-bananapi-r1.dts | 376 +++++++++++++++++++++++++++++++++
>> 2 files changed, 377 insertions(+)
>> create mode 100644 arch/arm/dts/sun7i-a20-bananapi-r1.dts
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 032c5ae..0cbae00 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -216,6 +216,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>> sun7i-a20-ainol-aw1.dtb \
>> sun7i-a20-bananapi.dtb \
>> sun7i-a20-bananapi-m1-plus.dtb \
>> + sun7i-a20-bananapi-r1.dtb \
>> sun7i-a20-bananapro.dtb \
>> sun7i-a20-cubieboard2.dtb \
>> sun7i-a20-cubietruck.dtb \
>> diff --git a/arch/arm/dts/sun7i-a20-bananapi-r1.dts b/arch/arm/dts/sun7i-a20-bananapi-r1.dts
>> new file mode 100644
>> index 0000000..1a550f9
>> --- /dev/null
>> +++ b/arch/arm/dts/sun7i-a20-bananapi-r1.dts
>> @@ -0,0 +1,376 @@
>> +/*
>> + * Copyright 2015 Hans de Goede <hdegoede at redhat.com>
>> + * Changes copyright 2016 Stephen Arnold <nerdboy at gentoo.org>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "sun7i-a20.dtsi"
>> +#include "sunxi-common-regulators.dtsi"
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>> +
>> +/ {
>> + model = "Banana Pi BPI-R1";
>> + compatible = "sinovoip,bpi-r1", "allwinner,sun7i-a20";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + serial1 = &uart2;
>> + serial2 = &uart3;
>> + serial3 = &uart7;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + leds {
>> + compatible = "gpio-leds";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&led_pins_bpi_r1>;
>> +
>> + green {
>> + label = "bpi-r1:green:usr";
>> + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
>> + linux,default-trigger = "heartbeat";
>> + };
>> + };
>> +
>> + reg_gmac_3v3: gmac-3v3 {
>> + compatible = "regulator-fixed";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&gmac_power_pin_bpi_r1>;
>> + regulator-name = "gmac-3v3";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + startup-delay-us = <100000>;
>> + enable-active-high;
>> + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
>> + };
>> +
>> +};
>> +
>> +&ahci {
>> + target-supply = <®_ahci_5v>;
>> + status = "okay";
>> +};
>> +
>> +&cpu0 {
>> + cpu-supply = <®_dcdc2>;
>> +};
>> +
>> +&ehci0 {
>> + status = "okay";
>> +};
>> +
>> +&ehci1 {
>> + status = "okay";
>> +};
>> +
>> +&ohci0 {
>> + status = "okay";
>> +};
>> +
>> +&ohci1 {
>> + status = "okay";
>> +};
>> +
>> +&gmac {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&gmac_pins_rgmii_a>;
>> + phy = <&phy1>;
>> + phy-mode = "rgmii";
>> + phy-supply = <®_gmac_3v3>;
>> + status = "okay";
>> +
>> + fixed-link {
>> + speed = <1000>;
>> + full-duplex;
>> + };
>> +
>> + mdio {
>> + compatible = "snps,dwmac-mdio";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + switch: ethernet-switch at 1e {
>> + compatible = "brcm,bcm53125";
>> + reg = <30>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port0: port at 0 {
>> + reg = <0>;
>> + label = "lan2";
>> + };
>> +
>> + port1: port at 1 {
>> + reg = <1>;
>> + label = "lan3";
>> + };
>> +
>> + port2: port at 2 {
>> + reg = <2>;
>> + label = "lan4";
>> + };
>> +
>> + port3: port at 3 {
>> + reg = <3>;
>> + label = "wan";
>> + };
>> +
>> + port4: port at 4 {
>> + reg = <4>;
>> + label = "lan1";
>> + };
>> +
>> + port8: port at 8 {
>> + reg = <8>;
>> + label = "cpu";
>> + ethernet = <&gmac>;
>> + phy-mode = "rgmii";
>> + fixed-link {
>> + speed = <1000>;
>> + full-duplex;
>> + };
>> + };
>> + };
>> + };
>> + };
>> +};
>> +
>> +&i2c0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pins_a>;
>> + status = "okay";
>> +
>> + axp209: pmic at 34 {
>> + compatible = "x-powers,axp209";
>> + reg = <0x34>;
>> + interrupt-parent = <&nmi_intc>;
>> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> + };
>> +};
>> +
>> +#include "axp209.dtsi"
>> +
>> +&i2c2 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pins_a>;
>> + status = "okay";
>> +};
>> +
>> +&ir0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&ir0_rx_pins_a>;
>> + status = "okay";
>> +};
>> +
>> +&mmc0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_r1>;
>> + vmmc-supply = <®_vcc3v3>;
>> + bus-width = <4>;
>> + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
>> + cd-inverted;
>> + status = "okay";
>> +};
>> +
>> +&otg_sram {
>> + status = "okay";
>> +};
>> +
>> +&pio {
>> + usb0_id_detect_pin: usb0_id_detect_pin at 0 {
>> + allwinner,pins = "PH4";
>> + allwinner,function = "gpio_in";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
>> + allwinner,pins = "PH5";
>> + allwinner,function = "gpio_in";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + usb0_vbus_pin_bpi_r1: usb0_vbus_pin at 0 {
>> + allwinner,pins = "PB9";
>> + allwinner,function = "gpio_out";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + usb2_vbus_pin_bpi_r1: usb2_vbus_pin at 0 {
>> + allwinner,pins = "PH3";
>> + allwinner,function = "gpio_out";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + mmc0_cd_pin_bpi_r1: mmc0_cd_pin at 0 {
>> + allwinner,pins = "PH1";
>> + allwinner,function = "gpio_in";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>> + };
>> +
>> + gmac_power_pin_bpi_r1: gmac_power_pin at 0 {
>> + allwinner,pins = "PH23";
>> + allwinner,function = "gpio_out";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + led_pins_bpi_r1: led_pins at 0 {
>> + allwinner,pins = "PH24";
>> + allwinner,function = "gpio_out";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +};
>> +
>> +®_ahci_5v {
>> + status = "okay";
>> +};
>> +
>> +®_dcdc2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-cpu";
>> +};
>> +
>> +®_dcdc3 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-int-dll";
>> +};
>> +
>> +®_ldo1 {
>> + regulator-name = "vdd-rtc";
>> +};
>> +
>> +®_ldo2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-name = "avcc";
>> +};
>> +
>> +®_usb0_vbus {
>> + pinctrl-0 = <&usb0_vbus_pin_bpi_r1>;
>> + gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>; /* PB9 */
>> + status = "okay";
>> +};
>> +
>> +®_usb1_vbus {
>> + status = "okay";
>> +};
>> +
>> +®_usb2_vbus {
>> + pinctrl-0 = <&usb2_vbus_pin_bpi_r1>;
>> + gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>; /* PH3 */
>> + status = "okay";
>> +};
>> +
>> +&spi0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&spi0_pins_a>,
>> + <&spi0_cs0_pins_a>,
>> + <&spi0_cs1_pins_a>;
>> + status = "okay";
>> +};
>> +
>> +&uart0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart0_pins_a>;
>> + status = "okay";
>> +};
>> +
>> +&uart2 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart2_pins_a>;
>> + status = "okay";
>> +};
>> +
>> +&uart3 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart3_pins_b>;
>> + status = "okay";
>> +};
>> +
>> +&uart7 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart7_pins_a>;
>> + status = "okay";
>> +};
>> +
>> +&usb_otg {
>> + dr_mode = "otg";
>> + status = "okay";
>> +};
>> +
>> +&usb_power_supply {
>> + status = "okay";
>> +};
>> +
>> +&usbphy {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&usb0_id_detect_pin>;
>> + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
>> + usb0_vbus_power-supply = <&usb_power_supply>;
>> + usb0_vbus-supply = <®_usb0_vbus>;
>> + usb1_vbus-supply = <®_usb1_vbus>;
>> + usb2_vbus-supply = <®_usb2_vbus>;
>> + status = "okay";
>> +};
>> --
>> 2.9.3
>>
More information about the U-Boot
mailing list