[U-Boot] [PATCH 10/16] README: i2c: Drop unused i2c CONFIG options

[Heiko Schocher]

Hello Simon,

Am 03.10.2016 um 02:01 schrieb Simon Glass:
> CONFIG_SYS_NUM_I2C_ADAPTERS and CONFIG_SYS_I2C_MULTI_NOPROBES are not used
> in U-Boot, so drop them.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
>   README | 7 ++-----
>   1 file changed, 2 insertions(+), 5 deletions(-)

Thanks!

Acked-by: Heiko Schocher <hs at denx.de>

bye,
Heiko
>
> diff --git a/README b/README
> index 0c90415..614a81c 100644
> --- a/README
> +++ b/README
> @@ -2326,10 +2326,7 @@ CBFS (Coreboot Filesystem) support
>   		additional defines:
>
>   		CONFIG_SYS_NUM_I2C_BUSES
> -		Hold the number of i2c buses you want to use. If you
> -		don't use/have i2c muxes on your i2c bus, this
> -		is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can
> -		omit this define.
> +		Hold the number of i2c buses you want to use.
>
>   		CONFIG_SYS_I2C_DIRECT_BUS
>   		define this, if you don't use i2c muxes on your hardware.
> @@ -2543,7 +2540,7 @@ CBFS (Coreboot Filesystem) support
>   		will skip addresses 0x50 and 0x68 on a board with one I2C bus
>
>   			#define CONFIG_I2C_MULTI_BUS
> -			#define CONFIG_SYS_I2C_MULTI_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
> +			#define CONFIG_SYS_I2C_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
>
>   		will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
>
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany