[U-Boot] [PATCH 00/10] mx7: add dt support for Colibri iMX7S/iMX7D

[Stefan Agner]

Hi Stefano,

On 2016-08-26 06:25, Stefano Babic wrote:
> Hi Stefan,
> 
> On 26/07/2016 08:22, Stefan Agner wrote:
>> From: Stefan Agner <stefan.agner at toradex.com>
>>
>> This patchset adds device tree support for Colibri iMX7S/iMX7D.
>> It is the first device tree enabled board for any i.MX 7 SoC
>> hence the patchset adds some common infrastructure:
>> - Add device tree support for serial_mxc.
>> - imx7.dtsi - I descided to leave the s/d suffix since the SoCs
>>   are very similar and boards will likely use runtime detection
>>   to distinguish the two available SoCs.
>> - The pinmux file imx7d-pinfunc.h is taken from the Kernel and
>>   stored in the same place
>>
>> Otherwise the conversion is quite straightforward and simplified
>> the board code somewhat. Two patches enhance the board support
>> with PMIC support, which has been the driver for this conversion.
>>
>> --
> 
> 
> Applied (whole series) to u-boot-imx, thanks !

I did not see this patch set in 2016.11-rc1, will it still make it
there?

--
Stefan