[U-Boot] [PATCH v6 02/21] thermal: Kconfig: Add IMX_THERMAL entry

Jagan Teki jteki at openedev.com
Tue Oct 4 22:48:16 CEST 2016


From: Jagan Teki <jagan at amarulasolutions.com>

Added kconfig for IMX_THERMAL driver.

Cc: Simon Glass <sjg at chromium.org>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Matteo Lisi <matteo.lisi at engicam.com>
Cc: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 drivers/thermal/Kconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 8e22ea7..f0ffbb3 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -5,3 +5,16 @@ config DM_THERMAL
 	  temperature sensors to permit warnings, speed throttling or even
 	  automatic power-off when the temperature gets too high or low. Other
 	  devices may be discrete but connected on a suitable bus.
+
+if DM_THERMAL
+
+config IMX_THERMAL
+	bool "Temperature sensor driver for Freescale i.MX SoCs"
+	depends on MX6
+	help
+	  Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
+          It supports one critical trip point and one passive trip point.  The
+          cpufreq is used as the cooling device to throttle CPUs when the
+          passive trip is crossed.
+
+endif # if DM_THERMAL
-- 
2.7.4



More information about the U-Boot mailing list