[U-Boot] [PATCH v5 00/21] imx6: Add Engicam i.CoreM6 QDL support

[Jagan Teki]

Hi Stefano,

On Tue, Oct 4, 2016 at 10:51 PM, Stefano Babic <sbabic at denx.de> wrote:
> Hi Jagan,
>
> On 04/10/2016 15:43, Jagan Teki wrote:
>> On Tue, Oct 4, 2016 at 6:58 PM, Stefano Babic <sbabic at denx.de> wrote:
>>> Hi Jagan,
>>>
>>> On 30/09/2016 08:44, Jagan Teki wrote:
>>>
>>>>
>>>> Can you pick this series.
>>>
>>> Series cannot be applied: I see several issue. The series breaks for
>>> different reason a lot of boards. I get 3 boards broken and 15 with
>>> warnings. Here the resons:
>>>
>>> CONFIG_DEFAULT_FDT_FILE was moved to Kconfig, but without updating the
>>> boards that have already defined. This generated a duplication, for
>>> example :
>>>
>>> w+include/configs/mx53ard.h:84:0: warning: "CONFIG_DEFAULT_FDT_FILE"
>>> redefined [enabled by default]
>>> w+include/generated/autoconf.h:13:0: note: this is the location of the
>>> previous definition
>>>        arm:  +   dms-ba16-1g
>>> +In file included from include/config.h:5:0,
>>>
>>> You have to move at the same time all CONFIG_DEFAULT_FDT_FILE from the
>>> board's config file to defconfig.
>>>
>>> I add at the same time build errors by compiling the new boards, for
>>> example:
>>>
>>>        arm:  +   imx6qdl_icore_mmc
>>> +arch/arm/imx-common/cpu.c: At top level:
>>> +arch/arm/cpu/armv7/built-in.o: In function `lldiv':
>>> +include/div64.h:45: undefined reference to `__div64_32'
>>> +arch/arm/cpu/armv7/built-in.o: In function `lpddr2_rl':
>>> +arch/arm/cpu/armv7/mx6/ddr.c:943: undefined reference to `hang'
>>> +arch/arm/cpu/armv7/built-in.o: In function `mx6_lpddr2_cfg':
>>> +arch/arm/cpu/armv7/mx6/ddr.c:1175: undefined reference to `mdelay'
>>> +arch/arm/cpu/armv7/built-in.o: In function `mx6_ddr3_cfg':
>>> +arch/arm/cpu/armv7/mx6/ddr.c:1281: undefined reference to `hang'
>>> +arch/arm/cpu/armv7/mx6/ddr.c:1480: undefined reference to `mdelay'
>>> +arch/arm/cpu/armv7/built-in.o: In function `mx6_dram_cfg':
>>> +arch/arm/cpu/armv7/mx6/ddr.c:1493: undefined reference to `hang'
>>>
>>> It looks strange, it is maybe due to the fact that I am rearranging the
>>> order how I apply the patches because I see issues in other patchset.
>>> But can you check it, please ?
>>
>> May be because of u-boot-imx/master is head, shall I try it on master
>> instead of next?
>
> Please try with -master. Anyway, I have pushed my rearranged -next (just
> the order was changed due to issues in other patchset), and I see the
> same problems.

Fixed the issue, where few of the configs from mx6_spl.h has removed
and tend to use it on defconfig (Simon patches did that) So I
re-synced and rebased all.

Please find the v6 [PATCH v6 00/21] imx6: Add Engicam i.CoreM6 QDL
support and try to apply fec_mxc dm conversion patches as well [PATCH
v4 0/3] net: fec_mxc: Convert to DM

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.