[U-Boot] [PATCH v2 09/12] dm: video: Add driver-model support to vesa graphics

Simon Glass sjg at chromium.org
Thu Oct 6 04:42:17 CEST 2016


Provide a function to run the Vesa BIOS for a given PCI device and obtain
the resulting configuration (e.g. display size) for use by the video
uclass. This makes it easier to write a video driver that uses vesa and
supports driver model.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---

Changes in v2:
- Make vbe_setup_video_priv() static

 drivers/pci/pci_rom.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/vbe.h         |  2 ++
 2 files changed, 57 insertions(+)

diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index 399055b..21ed17c 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -31,6 +31,7 @@
 #include <pci.h>
 #include <pci_rom.h>
 #include <vbe.h>
+#include <video.h>
 #include <video_fb.h>
 #include <linux/screen_info.h>
 
@@ -348,3 +349,57 @@ err:
 		free(ram);
 	return ret;
 }
+
+#ifdef CONFIG_DM_VIDEO
+static int vbe_setup_video_priv(struct vesa_mode_info *vesa,
+				struct video_priv *uc_priv,
+				struct video_uc_platdata *plat)
+{
+	if (!vesa->x_resolution)
+		return -ENXIO;
+	uc_priv->xsize = vesa->x_resolution;
+	uc_priv->ysize = vesa->y_resolution;
+	switch (vesa->bits_per_pixel) {
+	case 32:
+	case 24:
+		uc_priv->bpix = VIDEO_BPP32;
+		break;
+	case 16:
+		uc_priv->bpix = VIDEO_BPP16;
+		break;
+	default:
+		return -EPROTONOSUPPORT;
+	}
+	plat->base = vesa->phys_base_ptr;
+	plat->size = vesa->bytes_per_scanline * vesa->y_resolution;
+
+	return 0;
+}
+
+int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void))
+{
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	int ret;
+
+	/* If we are running from EFI or coreboot, this can't work */
+	if (!ll_boot_init())
+		return -EPERM;
+	bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
+	ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE |
+					PCI_ROM_ALLOW_FALLBACK);
+	bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
+	if (ret) {
+		debug("failed to run video BIOS: %d\n", ret);
+		return ret;
+	}
+
+	ret = vbe_setup_video_priv(&mode_info.vesa, uc_priv, plat);
+	if (ret) {
+		debug("No video mode configured\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
diff --git a/include/vbe.h b/include/vbe.h
index 164ccae..a743892 100644
--- a/include/vbe.h
+++ b/include/vbe.h
@@ -106,5 +106,7 @@ extern struct vbe_mode_info mode_info;
 
 struct graphic_device;
 int vbe_get_video_info(struct graphic_device *gdev);
+struct video_priv;
+int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void));
 
 #endif
-- 
2.8.0.rc3.226.g39d4020



More information about the U-Boot mailing list