[U-Boot] [PATCH 7/9] ARM: uniphier: insert udelay() just before support_card_reset_deassert()

[Masahiro Yamada]

As for LD11/LD20, we can no longer rely on the udelay() in the PLL
init functions.  udelay(200) is needed here to keep the ethernet
device in the reset state for enough time.  Anyway, 200 usec is
quite short for humans, so nobody cares it.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 arch/arm/mach-uniphier/micro-support-card.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-uniphier/micro-support-card.c b/arch/arm/mach-uniphier/micro-support-card.c
index 04e6558..e53bcdf 100644
--- a/arch/arm/mach-uniphier/micro-support-card.c
+++ b/arch/arm/mach-uniphier/micro-support-card.c
@@ -60,9 +60,8 @@ void support_card_init(void)
 	/*
 	 * After power on, we need to keep the LAN controller in reset state
 	 * for a while. (200 usec)
-	 * Fortunately, enough wait time is already inserted in pll_init()
-	 * function. So we do not have to wait here.
 	 */
+	udelay(200);
 	support_card_reset_deassert();
 }
 
-- 
1.9.1