[U-Boot] [PATCH] imx: mx6sx: Disable ENET clock before switching clock parent
Peng Fan
peng.fan at nxp.com
Sat Oct 8 10:58:29 CEST 2016
From: "Ye.Li" <ye.li at nxp.com>
Need to gate ENET clock when switching to a new clock parent, because
the mux is not glitchless.
Signed-off-by: Peng Fan <peng.fan at nxp.com>
Signed-off-by: Ye.Li <ye.li at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
arch/arm/cpu/armv7/mx6/clock.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index ae3143c..96fbd81 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -881,6 +881,11 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq)
writel(reg, &anatop->pll_enet);
#ifdef CONFIG_MX6SX
+ /* Disable enet system clcok before switching clock parent */
+ reg = readl(&imx_ccm->CCGR3);
+ reg &= ~MXC_CCM_CCGR3_ENET_MASK;
+ writel(reg, &imx_ccm->CCGR3);
+
/*
* Set enet ahb clock to 200MHz
* pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
--
2.6.2
More information about the U-Boot
mailing list