[U-Boot] [PATCH v7 15/21] arm: dts: Add devicetree for i.MX6Q
Jagan Teki
jteki at openedev.com
Sat Oct 8 14:30:22 CEST 2016
From: Jagan Teki <jagan at amarulasolutions.com>
Add i.MX6Q dtsi support from Linux.
Here is the last commit:
"ARM: dts: add gpio-ranges property to iMX GPIO controllers"
(sha1: bb728d662bed0fe91b152550e640cb3f6caa972c)
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Matteo Lisi <matteo.lisi at engicam.com>
Cc: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
arch/arm/dts/imx6q.dtsi | 300 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 300 insertions(+)
create mode 100644 arch/arm/dts/imx6q.dtsi
diff --git a/arch/arm/dts/imx6q.dtsi b/arch/arm/dts/imx6q.dtsi
new file mode 100644
index 0000000..c30c836
--- /dev/null
+++ b/arch/arm/dts/imx6q.dtsi
@@ -0,0 +1,300 @@
+
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q-pinfunc.h"
+#include "imx6qdl.dtsi"
+
+/ {
+ aliases {
+ ipu1 = &ipu2;
+ spi4 = &ecspi5;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
+ };
+
+ cpu at 1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ soc {
+ ocram: sram at 00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x40000>;
+ clocks = <&clks IMX6QDL_CLK_OCRAM>;
+ };
+
+ aips-bus at 02000000 { /* AIPS1 */
+ spba-bus at 02000000 {
+ ecspi5: ecspi at 02018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02018000 0x4000>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6Q_CLK_ECSPI5>,
+ <&clks IMX6Q_CLK_ECSPI5>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ };
+
+ iomuxc: iomuxc at 020e0000 {
+ compatible = "fsl,imx6q-iomuxc";
+ };
+ };
+
+ sata: sata at 02200000 {
+ compatible = "fsl,imx6q-ahci";
+ reg = <0x02200000 0x4000>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_SATA>,
+ <&clks IMX6QDL_CLK_SATA_REF_100M>,
+ <&clks IMX6QDL_CLK_AHB>;
+ clock-names = "sata", "sata_ref", "ahb";
+ status = "disabled";
+ };
+
+ gpu_vg: gpu at 02204000 {
+ compatible = "vivante,gc";
+ reg = <0x02204000 0x4000>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>;
+ clock-names = "bus", "core";
+ power-domains = <&gpc 1>;
+ };
+
+ ipu2: ipu at 02800000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ipu";
+ reg = <0x02800000 0x400000>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_IPU2>,
+ <&clks IMX6QDL_CLK_IPU2_DI0>,
+ <&clks IMX6QDL_CLK_IPU2_DI1>;
+ clock-names = "bus", "di0", "di1";
+ resets = <&src 4>;
+
+ ipu2_csi0: port at 0 {
+ reg = <0>;
+ };
+
+ ipu2_csi1: port at 1 {
+ reg = <1>;
+ };
+
+ ipu2_di0: port at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu2_di0_disp0: disp0-endpoint {
+ };
+
+ ipu2_di0_hdmi: hdmi-endpoint {
+ remote-endpoint = <&hdmi_mux_2>;
+ };
+
+ ipu2_di0_mipi: mipi-endpoint {
+ remote-endpoint = <&mipi_mux_2>;
+ };
+
+ ipu2_di0_lvds0: lvds0-endpoint {
+ remote-endpoint = <&lvds0_mux_2>;
+ };
+
+ ipu2_di0_lvds1: lvds1-endpoint {
+ remote-endpoint = <&lvds1_mux_2>;
+ };
+ };
+
+ ipu2_di1: port at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu2_di1_hdmi: hdmi-endpoint {
+ remote-endpoint = <&hdmi_mux_3>;
+ };
+
+ ipu2_di1_mipi: mipi-endpoint {
+ remote-endpoint = <&mipi_mux_3>;
+ };
+
+ ipu2_di1_lvds0: lvds0-endpoint {
+ remote-endpoint = <&lvds0_mux_3>;
+ };
+
+ ipu2_di1_lvds1: lvds1-endpoint {
+ remote-endpoint = <&lvds1_mux_3>;
+ };
+ };
+ };
+ };
+
+ display-subsystem {
+ compatible = "fsl,imx-display-subsystem";
+ ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
+ };
+
+ gpu-subsystem {
+ compatible = "fsl,imx-gpu-subsystem";
+ cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
+ };
+};
+
+&hdmi {
+ compatible = "fsl,imx6q-hdmi";
+
+ port at 2 {
+ reg = <2>;
+
+ hdmi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_hdmi>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+
+ hdmi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_hdmi>;
+ };
+ };
+};
+
+&ldb {
+ clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
+ clock-names = "di0_pll", "di1_pll",
+ "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+ "di0", "di1";
+
+ lvds-channel at 0 {
+ port at 2 {
+ reg = <2>;
+
+ lvds0_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_lvds0>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+
+ lvds0_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_lvds0>;
+ };
+ };
+ };
+
+ lvds-channel at 1 {
+ port at 2 {
+ reg = <2>;
+
+ lvds1_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_lvds1>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+
+ lvds1_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_lvds1>;
+ };
+ };
+ };
+};
+
+&mipi_dsi {
+ ports {
+ port at 2 {
+ reg = <2>;
+
+ mipi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_mipi>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+
+ mipi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_mipi>;
+ };
+ };
+ };
+};
+
+&vpu {
+ compatible = "fsl,imx6q-vpu", "cnm,coda960";
+};
--
2.7.4
More information about the U-Boot
mailing list