[U-Boot] [PATCH V3 4/8] imx-common: inctroude USE_IMXIMG_PLUGIN Kconfig

[Peng Fan]

On Sun, Oct 09, 2016 at 07:45:41AM +0200, Eric Nelson wrote:
>Hi Peng,
>
>Note the typo in the subject header.

Thanks.

>
>On 10/08/2016 08:58 AM, Peng Fan wrote:
>> Introduce USE_IMXIMG_PLUGIN Kconfig
>> 
>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>> Cc: Stefano Babic <sbabic at denx.de>
>> Reviewed-by: Tom Rini <trini at konsulko.com>
>> ---
>> 
>> V3:
>>  None
>> 
>> V2:
>>  New
>> 
>>  arch/arm/imx-common/Kconfig | 7 +++++++
>>  1 file changed, 7 insertions(+)
>> 
>> diff --git a/arch/arm/imx-common/Kconfig b/arch/arm/imx-common/Kconfig
>> index 1b7da5a..85eac57 100644
>> --- a/arch/arm/imx-common/Kconfig
>> +++ b/arch/arm/imx-common/Kconfig
>> @@ -17,3 +17,10 @@ config IMX_BOOTAUX
>>  	depends on ARCH_MX7 || ARCH_MX6
>>  	help
>>  	  bootaux [addr] to boot auxiliary core.
>> +
>> +config USE_IMXIMG_PLUGIN
>> +	bool "Using imximage plugin code"
>
>s/Using/Use/

Will fix this in V4.

>
>> +	depends on ARCH_MX7 || ARCH_MX6
>> +	help
>> +	  i.MX6/7 supports DCD and Plugin. Enable this configuration
>> +	  to use Plugin, otherwise DCD will be used.
>> 
>
>MX5x also supports plugins, right?

Yeah. I do not have the hardware to test, so not add ARCH_MX5.
If later, someone can test ARCH_MX5, then he/she could add the support.

>
>Also, the alternative isn't really DCD is it? Most (all) of the boards
>using SPL now are using the essentially empty config file
>in arch/arm/imx-common/spl_sd.cfg.

The help msg is just to tell use plugin or DCD. spl_sd.cfg surely
can have DCD DATA lines or not :)

Regards,
Peng.
>
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot