[U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1

[Stephen Arnold]

Please ignore the crufty v4 cover; the following v5 is correct (a
single patch) as requested by Jagan.

Thanks, Steve

On Sun, Oct 9, 2016 at 2:04 PM, Stephen Arnold
<stephen.arnold42 at gmail.com> wrote:
> From: Steve Arnold <stephen.arnold42 at gmail.com>
>
> * changes from lamobo-r1 required include:
>   - unset ahci power pin
>   - usbvbus gpio pin change
>   - mmc cd gpio pin change
>   - enable uart2, set default LED trigger
>   - CONFIG_GMAC_TX_DELAY change
>
> Changes for v2:
>   - incorprated feedback for config options (remove 3, add 1)
> Changes for v3/v4:
>   - re-submit (no change to patch payload) with cover
>
> Steve Arnold (2):
>   ARM: sun7i: config: add config for Sinovoip/Bananapi BPI-R1
>   ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1
>
>  arch/arm/dts/Makefile                  |   1 +
>  arch/arm/dts/sun7i-a20-bananapi-r1.dts | 376 +++++++++++++++++++++++++++++++++
>  configs/Bananapi_R1_defconfig          |  16 ++
>  3 files changed, 393 insertions(+)
>  create mode 100644 arch/arm/dts/sun7i-a20-bananapi-r1.dts
>  create mode 100644 configs/Bananapi_R1_defconfig
>
> Signed-off-by: Steve Arnold <stephen.arnold42 at gmail.com>
> Cc: Ian Campbell <ijc at hellion.org.uk>
> Cc: Hans De Goede <hdegoede at redhat.com>
>
> --
> 2.9.3
>