[U-Boot] [RFC 1/4] drivers: dma: Add the ARM PL330 DMA driver
Dinh Nguyen
dinguyen at kernel.org
Mon Oct 10 17:52:20 CEST 2016
From: Dinh Nguyen <dinguyen at opensource.altera.com>
Adopted from the Linux kernel PL330 DMA driver.
Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
---
arch/arm/include/asm/pl330.h | 105 +++++
drivers/dma/pl330.c | 942 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 1047 insertions(+)
create mode 100644 arch/arm/include/asm/pl330.h
create mode 100644 drivers/dma/pl330.c
diff --git a/arch/arm/include/asm/pl330.h b/arch/arm/include/asm/pl330.h
new file mode 100644
index 0000000..dd19b4c
--- /dev/null
+++ b/arch/arm/include/asm/pl330.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar at samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * adapted from linux kernel pl330.h
+ */
+
+#ifndef __PL330_H_
+#define __PL330_H_
+
+#define PL330_STATE_STOPPED (1 << 0)
+#define PL330_STATE_EXECUTING (1 << 1)
+#define PL330_STATE_WFE (1 << 2)
+#define PL330_STATE_FAULTING (1 << 3)
+#define PL330_STATE_COMPLETING (1 << 4)
+#define PL330_STATE_WFP (1 << 5)
+#define PL330_STATE_KILLING (1 << 6)
+#define PL330_STATE_FAULT_COMPLETING (1 << 7)
+#define PL330_STATE_CACHEMISS (1 << 8)
+#define PL330_STATE_UPDTPC (1 << 9)
+#define PL330_STATE_ATBARRIER (1 << 10)
+#define PL330_STATE_QUEUEBUSY (1 << 11)
+#define PL330_STATE_INVALID (1 << 15)
+
+#define PL330_DMA_MAX_BURST_SIZE 3
+
+/* structure to be passed in for pl330_transfer_x */
+struct pl330_transfer_struct {
+ void __iomem *reg_base;
+ u32 channel_num;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 len;
+ u32 brst_size;
+ u32 single_brst_size;
+ u32 brst_len;
+ u32 peripheral_id;
+ u32 transfer_type;
+ u32 enable_cache1;
+ u32 buf_size;
+ u8 *buf;
+};
+
+enum pl330_srccachectrl {
+ SCCTRL0 = 0, /* Noncacheable and nonbufferable */
+ SCCTRL1, /* Bufferable only */
+ SCCTRL2, /* Cacheable, but do not allocate */
+ SCCTRL3, /* Cacheable and bufferable, but do not allocate */
+ SINVALID1,
+ SINVALID2,
+ SCCTRL6, /* Cacheable write-through, allocate on reads only */
+ SCCTRL7, /* Cacheable write-back, allocate on reads only */
+};
+
+enum pl330_dstcachectrl {
+ DCCTRL0 = 0, /* Noncacheable and nonbufferable */
+ DCCTRL1, /* Bufferable only */
+ DCCTRL2, /* Cacheable, but do not allocate */
+ DCCTRL3, /* Cacheable and bufferable, but do not allocate */
+ DINVALID1 = 8,
+ DINVALID2,
+ DCCTRL6, /* Cacheable write-through, allocate on writes only */
+ DCCTRL7, /* Cacheable write-back, allocate on writes only */
+};
+
+enum pl330_byteswap {
+ SWAP_NO = 0,
+ SWAP_2,
+ SWAP_4,
+ SWAP_8,
+ SWAP_16,
+};
+
+/*
+ * Request Configuration.
+ * The PL330 core does not modify this and uses the last
+ * working configuration if the request doesn't provide any.
+ *
+ * The Client may want to provide this info only for the
+ * first request and a request with new settings.
+ */
+struct pl330_reqcfg {
+ /* Address Incrementing */
+ unsigned dst_inc:1;
+ unsigned src_inc:1;
+
+ /*
+ * For now, the SRC & DST protection levels
+ * and burst size/length are assumed same.
+ */
+ int nonsecure;
+ int privileged;
+ int insnaccess;
+ unsigned brst_len:5;
+ unsigned brst_size:3; /* in power of 2 */
+
+ enum pl330_dstcachectrl dcctl;
+ enum pl330_srccachectrl scctl;
+ enum pl330_byteswap swap;
+};
+
+void arm_pl330_transfer(struct pl330_transfer_struct *pl330);
+#endif /* __PL330_H_ */
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
new file mode 100644
index 0000000..a97cd9f
--- /dev/null
+++ b/drivers/dma/pl330.c
@@ -0,0 +1,942 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar at samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dma.h>
+#include <dm/device.h>
+#include <asm/pl330.h>
+#include <asm/processor.h>
+
+struct dma_pl330_platdata {
+ u32 base;
+};
+
+/* Register and Bit field Definitions */
+#define DS 0x0
+#define DS_ST_STOP 0x0
+#define DS_ST_EXEC 0x1
+#define DS_ST_CMISS 0x2
+#define DS_ST_UPDTPC 0x3
+#define DS_ST_WFE 0x4
+#define DS_ST_ATBRR 0x5
+#define DS_ST_QBUSY 0x6
+#define DS_ST_WFP 0x7
+#define DS_ST_KILL 0x8
+#define DS_ST_CMPLT 0x9
+#define DS_ST_FLTCMP 0xe
+#define DS_ST_FAULT 0xf
+
+#define DPC 0x4
+#define INTEN 0x20
+#define ES 0x24
+#define INTSTATUS 0x28
+#define INTCLR 0x2c
+#define FSM 0x30
+#define FSC 0x34
+#define FTM 0x38
+
+#define _FTC 0x40
+#define FTC(n) (_FTC + (n)*0x4)
+
+#define _CS 0x100
+#define CS(n) (_CS + (n)*0x8)
+#define CS_CNS (1 << 21)
+
+#define _CPC 0x104
+#define CPC(n) (_CPC + (n)*0x8)
+
+#define _SA 0x400
+#define SA(n) (_SA + (n)*0x20)
+
+#define _DA 0x404
+#define DA(n) (_DA + (n)*0x20)
+
+#define _CC 0x408
+#define CC(n) (_CC + (n)*0x20)
+
+#define CC_SRCINC (1 << 0)
+#define CC_DSTINC (1 << 14)
+#define CC_SRCPRI (1 << 8)
+#define CC_DSTPRI (1 << 22)
+#define CC_SRCNS (1 << 9)
+#define CC_DSTNS (1 << 23)
+#define CC_SRCIA (1 << 10)
+#define CC_DSTIA (1 << 24)
+#define CC_SRCBRSTLEN_SHFT 4
+#define CC_DSTBRSTLEN_SHFT 18
+#define CC_SRCBRSTSIZE_SHFT 1
+#define CC_DSTBRSTSIZE_SHFT 15
+#define CC_SRCCCTRL_SHFT 11
+#define CC_SRCCCTRL_MASK 0x7
+#define CC_DSTCCTRL_SHFT 25
+#define CC_DRCCCTRL_MASK 0x7
+#define CC_SWAP_SHFT 28
+
+#define _LC0 0x40c
+#define LC0(n) (_LC0 + (n)*0x20)
+
+#define _LC1 0x410
+#define LC1(n) (_LC1 + (n)*0x20)
+
+#define DBGSTATUS 0xd00
+#define DBG_BUSY (1 << 0)
+
+#define DBGCMD 0xd04
+#define DBGINST0 0xd08
+#define DBGINST1 0xd0c
+
+#define CR0 0xe00
+#define CR1 0xe04
+#define CR2 0xe08
+#define CR3 0xe0c
+#define CR4 0xe10
+#define CRD 0xe14
+
+#define PERIPH_ID 0xfe0
+#define PERIPH_REV_SHIFT 20
+#define PERIPH_REV_MASK 0xf
+#define PERIPH_REV_R0P0 0
+#define PERIPH_REV_R1P0 1
+#define PERIPH_REV_R1P1 2
+
+#define CR0_PERIPH_REQ_SET (1 << 0)
+#define CR0_BOOT_EN_SET (1 << 1)
+#define CR0_BOOT_MAN_NS (1 << 2)
+#define CR0_NUM_CHANS_SHIFT 4
+#define CR0_NUM_CHANS_MASK 0x7
+#define CR0_NUM_PERIPH_SHIFT 12
+#define CR0_NUM_PERIPH_MASK 0x1f
+#define CR0_NUM_EVENTS_SHIFT 17
+#define CR0_NUM_EVENTS_MASK 0x1f
+
+#define CR1_ICACHE_LEN_SHIFT 0
+#define CR1_ICACHE_LEN_MASK 0x7
+#define CR1_NUM_ICACHELINES_SHIFT 4
+#define CR1_NUM_ICACHELINES_MASK 0xf
+
+/* Configuration register value */
+#define CRD_DATA_WIDTH_SHIFT 0
+#define CRD_DATA_WIDTH_MASK 0x7
+#define CRD_WR_CAP_SHIFT 4
+#define CRD_WR_CAP_MASK 0x7
+#define CRD_WR_Q_DEP_SHIFT 8
+#define CRD_WR_Q_DEP_MASK 0xf
+#define CRD_RD_CAP_SHIFT 12
+#define CRD_RD_CAP_MASK 0x7
+#define CRD_RD_Q_DEP_SHIFT 16
+#define CRD_RD_Q_DEP_MASK 0xf
+#define CRD_DATA_BUFF_SHIFT 20
+#define CRD_DATA_BUFF_MASK 0x3ff
+
+/* Microcode opcode value */
+#define CMD_DMAADDH 0x54
+#define CMD_DMAEND 0x00
+#define CMD_DMAFLUSHP 0x35
+#define CMD_DMAGO 0xa0
+#define CMD_DMALD 0x04
+#define CMD_DMALDP 0x25
+#define CMD_DMALP 0x20
+#define CMD_DMALPEND 0x28
+#define CMD_DMAKILL 0x01
+#define CMD_DMAMOV 0xbc
+#define CMD_DMANOP 0x18
+#define CMD_DMARMB 0x12
+#define CMD_DMASEV 0x34
+#define CMD_DMAST 0x08
+#define CMD_DMASTP 0x29
+#define CMD_DMASTZ 0x0c
+#define CMD_DMAWFE 0x36
+#define CMD_DMAWFP 0x30
+#define CMD_DMAWMB 0x13
+
+/* the size of opcode plus opcode required settings */
+#define SZ_DMAADDH 3
+#define SZ_DMAEND 1
+#define SZ_DMAFLUSHP 2
+#define SZ_DMALD 1
+#define SZ_DMALDP 2
+#define SZ_DMALP 2
+#define SZ_DMALPEND 2
+#define SZ_DMAKILL 1
+#define SZ_DMAMOV 6
+#define SZ_DMANOP 1
+#define SZ_DMARMB 1
+#define SZ_DMASEV 2
+#define SZ_DMAST 1
+#define SZ_DMASTP 2
+#define SZ_DMASTZ 1
+#define SZ_DMAWFE 2
+#define SZ_DMAWFP 2
+#define SZ_DMAWMB 1
+#define SZ_DMAGO 6
+
+/* Use this _only_ to wait on transient states */
+#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
+
+/* Enum declaration */
+enum dmamov_dst {
+ SAR = 0,
+ CCR,
+ DAR,
+};
+
+enum pl330_dst {
+ SRC = 0,
+ DST,
+};
+
+enum pl330_cond {
+ SINGLE,
+ BURST,
+ ALWAYS,
+};
+
+/* Structure will be used by _emit_LPEND function */
+struct _arg_LPEND {
+ enum pl330_cond cond;
+ int forever;
+ unsigned loop;
+ u8 bjump;
+};
+
+/* Structure will be used by _emit_GO function */
+struct _arg_GO {
+ u8 chan;
+ u32 addr;
+ unsigned ns;
+};
+
+/*
+ * Function: add opcode DMAEND into microcode (end)
+ * Return: size of opcode
+ * Parameter: buf -> the buffer which stored the microcode program
+ */
+static inline u32 _emit_END(u8 buf[])
+{
+ buf[0] = CMD_DMAEND;
+
+ return SZ_DMAEND;
+}
+
+static inline u32 _emit_FLUSHP(u8 buf[], u8 peri)
+{
+ buf[0] = CMD_DMAFLUSHP;
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ return SZ_DMAFLUSHP;
+}
+
+static inline u32 _emit_LD(u8 buf[], enum pl330_cond cond)
+{
+ buf[0] = CMD_DMALD;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ return SZ_DMALD;
+}
+
+static inline u32 _emit_LDP(u8 buf[], enum pl330_cond cond, u8 peri)
+{
+ buf[0] = CMD_DMALDP;
+
+ if (cond == BURST)
+ buf[0] |= (1 << 1);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ return SZ_DMALDP;
+}
+
+static inline u32 _emit_LP(u8 buf[], unsigned loop, u8 cnt)
+{
+ buf[0] = CMD_DMALP;
+
+ if (loop)
+ buf[0] |= (1 << 1);
+
+ cnt--; /* DMAC increments by 1 internally */
+ buf[1] = cnt;
+
+ return SZ_DMALP;
+}
+
+static inline u32 _emit_LPEND(u8 buf[], const struct _arg_LPEND *arg)
+{
+ enum pl330_cond cond = arg->cond;
+ bool forever = arg->forever;
+ unsigned loop = arg->loop;
+ u8 bjump = arg->bjump;
+
+ buf[0] = CMD_DMALPEND;
+
+ if (loop)
+ buf[0] |= (1 << 2);
+
+ if (!forever)
+ buf[0] |= (1 << 4);
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ buf[1] = bjump;
+
+ return SZ_DMALPEND;
+}
+
+static inline u32 _emit_KILL(u8 buf[])
+{
+ buf[0] = CMD_DMAKILL;
+
+ return SZ_DMAKILL;
+}
+
+static inline u32 _emit_MOV(u8 buf[], enum dmamov_dst dst, u32 val)
+{
+ buf[0] = CMD_DMAMOV;
+ buf[1] = dst;
+
+ buf[2] = val & 0xFF;
+ buf[3] = (val >> 8) & 0xFF;
+ buf[4] = (val >> 16) & 0xFF;
+ buf[5] = (val >> 24) & 0xFF;
+
+ return SZ_DMAMOV;
+}
+
+static inline u32 _emit_NOP(u8 buf[])
+{
+ buf[0] = CMD_DMANOP;
+
+ return SZ_DMANOP;
+}
+
+static inline u32 _emit_RMB(u8 buf[])
+{
+ buf[0] = CMD_DMARMB;
+
+ return SZ_DMARMB;
+}
+
+static inline u32 _emit_SEV(u8 buf[], u8 ev)
+{
+ buf[0] = CMD_DMASEV;
+
+ ev &= 0x1f;
+ ev <<= 3;
+ buf[1] = ev;
+
+ return SZ_DMASEV;
+}
+
+static inline u32 _emit_ST(u8 buf[], enum pl330_cond cond)
+{
+ buf[0] = CMD_DMAST;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ return SZ_DMAST;
+}
+
+static inline u32 _emit_STP(u8 buf[], enum pl330_cond cond, u8 peri)
+{
+ buf[0] = CMD_DMASTP;
+
+ if (cond == BURST)
+ buf[0] |= (1 << 1);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ return SZ_DMASTP;
+}
+
+static inline u32 _emit_STZ(u8 buf[])
+{
+ buf[0] = CMD_DMASTZ;
+
+ return SZ_DMASTZ;
+}
+
+static inline u32 _emit_WFE(u8 buf[], u8 ev, unsigned invalidate)
+{
+ buf[0] = CMD_DMAWFE;
+
+ ev &= 0x1f;
+ ev <<= 3;
+ buf[1] = ev;
+
+ if (invalidate)
+ buf[1] |= (1 << 1);
+
+ return SZ_DMAWFE;
+}
+
+static inline u32 _emit_WFP(u8 buf[], enum pl330_cond cond, u8 peri)
+{
+ buf[0] = CMD_DMAWFP;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (0 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (0 << 0);
+ else
+ buf[0] |= (0 << 1) | (1 << 0);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ return SZ_DMAWFP;
+}
+
+static inline u32 _emit_WMB(u8 buf[])
+{
+ buf[0] = CMD_DMAWMB;
+
+ return SZ_DMAWMB;
+}
+
+static inline u32 _emit_GO(u8 buf[],
+ const struct _arg_GO *arg)
+{
+ u8 chan = arg->chan;
+ u32 addr = arg->addr;
+ unsigned ns = arg->ns;
+
+ buf[0] = CMD_DMAGO;
+ buf[0] |= (ns << 1);
+
+ buf[1] = chan & 0x7;
+ buf[2] = addr & 0xFF;
+ buf[3] = (addr >> 8) & 0xFF;
+ buf[4] = (addr >> 16) & 0xFF;
+ buf[5] = (addr >> 24) & 0xFF;
+ return SZ_DMAGO;
+}
+
+/*
+ * Function: Populate the CCR register
+ * Parameter: rqc -> Request Configuration.
+ */
+static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+{
+ u32 ccr = 0;
+
+ if (rqc->src_inc)
+ ccr |= CC_SRCINC;
+ if (rqc->dst_inc)
+ ccr |= CC_DSTINC;
+
+ /* We set same protection levels for Src and DST for now */
+ if (rqc->privileged)
+ ccr |= CC_SRCPRI | CC_DSTPRI;
+ if (rqc->nonsecure)
+ ccr |= CC_SRCNS | CC_DSTNS;
+ if (rqc->insnaccess)
+ ccr |= CC_SRCIA | CC_DSTIA;
+
+ ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+ ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+ ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+ ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+ ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+ ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
+
+ ccr |= (rqc->swap << CC_SWAP_SHFT);
+ return ccr;
+}
+
+/*
+ * Function: wait until DMA Manager is idle
+ * Return: 1 = error / timeout ocurred before idle
+ * Parameter: loop -> number of loop before timeout ocurred
+ */
+static int _until_dmac_idle(struct pl330_transfer_struct *pl330, int loops)
+{
+ void __iomem *regs = pl330->reg_base;
+
+ do {
+ /* Until Manager is Idle */
+ if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+ break;
+
+ cpu_relax();
+ } while (--loops);
+
+ if (!loops)
+ return true;
+
+ return false;
+}
+
+static inline void _execute_DBGINSN(struct pl330_transfer_struct *pl330,
+ u8 insn[], bool as_manager, int timeout_loops)
+{
+ void __iomem *regs = pl330->reg_base;
+ u32 val;
+
+ val = (insn[0] << 16) | (insn[1] << 24);
+ if (!as_manager) {
+ val |= (1 << 0);
+ val |= (pl330->channel_num << 8); /* Channel Number */
+ }
+ writel(val, regs + DBGINST0);
+
+ val = insn[2];
+ val = val | (insn[3] << 8);
+ val = val | (insn[4] << 16);
+ val = val | (insn[5] << 24);
+ writel(val, regs + DBGINST1);
+
+ /* If timed out due to halted state-machine */
+ if (_until_dmac_idle(pl330, timeout_loops)) {
+ printf("DMAC halted!\n");
+ return;
+ }
+
+ /* Get going */
+ writel(0, regs + DBGCMD);
+}
+
+static inline u32 _state(struct pl330_transfer_struct *pl330)
+{
+ void __iomem *regs = pl330->reg_base;
+ u32 val;
+
+ val = readl(regs + CS(pl330->channel_num)) & 0xf;
+
+ udelay(1);
+
+ switch (val) {
+ case DS_ST_STOP:
+ return PL330_STATE_STOPPED;
+ case DS_ST_EXEC:
+ return PL330_STATE_EXECUTING;
+ case DS_ST_CMISS:
+ return PL330_STATE_CACHEMISS;
+ case DS_ST_UPDTPC:
+ return PL330_STATE_UPDTPC;
+ case DS_ST_WFE:
+ return PL330_STATE_WFE;
+ case DS_ST_FAULT:
+ return PL330_STATE_FAULTING;
+ case DS_ST_ATBRR:
+ return PL330_STATE_ATBARRIER;
+ case DS_ST_QBUSY:
+ return PL330_STATE_QUEUEBUSY;
+ case DS_ST_WFP:
+ return PL330_STATE_WFP;
+ case DS_ST_KILL:
+ return PL330_STATE_KILLING;
+ case DS_ST_CMPLT:
+ return PL330_STATE_COMPLETING;
+ case DS_ST_FLTCMP:
+ return PL330_STATE_FAULT_COMPLETING;
+ default:
+ return PL330_STATE_INVALID;
+ }
+}
+
+static void _stop(struct pl330_transfer_struct *pl330, int timeout_loops)
+{
+ u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+ if (_state(pl330) == PL330_STATE_FAULT_COMPLETING)
+ UNTIL(pl330, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+ /* Return if nothing needs to be done */
+ if (_state(pl330) == PL330_STATE_COMPLETING
+ || _state(pl330) == PL330_STATE_KILLING
+ || _state(pl330) == PL330_STATE_STOPPED)
+ return;
+
+ _emit_KILL(insn);
+
+ _execute_DBGINSN(pl330, insn, 0, timeout_loops);
+}
+
+static bool _trigger(struct pl330_transfer_struct *pl330, u8 *buffer,
+ int timeout_loops)
+{
+ void __iomem *regs = pl330->reg_base;
+ struct _arg_GO go;
+ u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+ /* Return if already ACTIVE */
+ if (_state(pl330) != PL330_STATE_STOPPED)
+ return true;
+
+ go.chan = pl330->channel_num;
+ go.addr = (u32)buffer;
+
+ /* determine security. Assume secure */
+ if (readl(regs + CS(go.chan)) & CS_CNS)
+ go.ns = 1;
+ else
+ go.ns = 0;
+ _emit_GO(insn, &go);
+
+ /* Only manager can execute GO */
+ _execute_DBGINSN(pl330, insn, true, timeout_loops);
+
+ return false;
+}
+
+static bool _start(struct pl330_transfer_struct *pl330, int timeout_loops)
+{
+ switch (_state(pl330)) {
+ case PL330_STATE_FAULT_COMPLETING:
+ UNTIL(pl330, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+ if (_state(pl330) == PL330_STATE_KILLING)
+ UNTIL(pl330, PL330_STATE_STOPPED)
+
+ case PL330_STATE_FAULTING:
+ _stop(pl330, timeout_loops);
+
+ case PL330_STATE_KILLING:
+ case PL330_STATE_COMPLETING:
+ UNTIL(pl330, PL330_STATE_STOPPED)
+
+ case PL330_STATE_STOPPED:
+ return _trigger(pl330, pl330->buf, timeout_loops);
+
+ case PL330_STATE_WFP:
+ case PL330_STATE_QUEUEBUSY:
+ case PL330_STATE_ATBARRIER:
+ case PL330_STATE_UPDTPC:
+ case PL330_STATE_CACHEMISS:
+ case PL330_STATE_EXECUTING:
+ return true;
+
+ case PL330_STATE_WFE: /* For RESUME, nothing yet */
+ default:
+ return false;
+ }
+}
+
+/*
+ * DMA run or start
+ * Return: 1 for error or not successful
+ */
+static int pl330_transfer_start(struct pl330_transfer_struct *pl330)
+{
+ /* Timeout loop */
+ int timeout_loops = 10000;
+
+ /* Execute the command list */
+ return _start(pl330, timeout_loops);
+}
+
+/*
+ * DMA poll until finish or error
+ * Return: 1 for error or not successful
+ * channel_num - channel number assigned, valid from 0 to 7
+ */
+static int pl330_transfer_finish(struct pl330_transfer_struct *pl330)
+{
+ /* Wait until finish execution to ensure we compared correct result*/
+ UNTIL(pl330, PL330_STATE_STOPPED | PL330_STATE_FAULTING);
+
+ /* check the state */
+ if (_state(pl330) == PL330_STATE_FAULTING) {
+ printf("FAULT Mode: Channel %u Faulting, FTR = 0x%08x, "
+ "CPC = 0x%08x\n", pl330->channel_num,
+ readl(pl330->reg_base + FTC(pl330->channel_num)),
+ ((u32)readl(pl330->reg_base + CPC(pl330->channel_num))
+ - (u32)pl330->buf));
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * DMA transfer setup (DMA_SUPPORTS_MEM_TO_MEM, DMA_SUPPORTS_MEM_TO_DEV or
+ DMA_SUPPORTS_DEV_TO_MEM)
+ * For Peripheral transfer, the FIFO threshold value is expected at
+ * 2 ^ pl330->brst_size * pl330->brst_len.
+ * Return: 1 for error or not successful
+ *
+ * channel_num - channel number assigned, valid from 0 to 7
+ * src_addr - address to transfer from / source
+ * dst_addr - address to transfer to / destination
+ * len - number of bytes to be transferred
+ * brst_size - valid from 0 - 3
+ * where 0 = 1 (2 ^ 0) bytes and 3 = 8 bytes (2 ^ 3)
+ * single_brst_size - single transfer size (from 0 - 3)
+ * brst_len - valid from 1 - 16 where each burst can trasfer 1 - 16
+ * data chunk (each chunk size equivalent to brst_size)
+ * peripheral_id assigned peripheral_id, valid from 0 to 31
+ * transfer_type DMA_SUPPORTS_MEM_TO_MEM, DMA_SUPPORTS_MEM_TO_DEV or
+ * DMA_SUPPORTS_DEV_TO_MEM
+ * buf_size - sizeof(buf)
+ * buf - buffer handler which will point to the memory
+ * allocated for dma microcode
+ */
+static int pl330_transfer_setup(struct pl330_transfer_struct *pl330)
+{
+ /* Variable declaration */
+ int off = 0; /* buffer offset clear to 0 */
+ int ret = 0;
+ unsigned loopjmp0, loopjmp1; /* for DMALPEND */
+ unsigned lcnt0 = 0; /* loop count 0 */
+ unsigned lcnt1 = 0; /* loop count 1 */
+ unsigned burst_size = 0;
+ unsigned len = pl330->len;
+ u32 ccr = 0; /* Channel Control Register */
+ struct pl330_reqcfg reqcfg;
+
+ /* for burst, always use the maximum burst size and length */
+ pl330->brst_size = PL330_DMA_MAX_BURST_SIZE;
+ pl330->brst_len = 16;
+ pl330->single_brst_size = 1;
+
+ /* burst_size = 2 ^ brst_size */
+ burst_size = 1 << pl330->brst_size;
+
+ pl330->src_addr = (u32)&pl330->buf;
+ if (pl330->dst_addr & (burst_size - 1)) {
+ puts("ERROR PL330 : destination address unaligned\n");
+ return 1;
+ }
+
+ /* DMAMOV DAR, x->dst_addr */
+ off += _emit_MOV(&pl330->buf[off], DAR, pl330->dst_addr);
+ /* DMAFLUSHP P(periheral_id) */
+ if (pl330->transfer_type != DMA_SUPPORTS_MEM_TO_MEM)
+ off += _emit_FLUSHP(&pl330->buf[off], pl330->peripheral_id);
+
+ /* Preparing the CCR value */
+ if (pl330->transfer_type == DMA_SUPPORTS_MEM_TO_DEV) {
+ reqcfg.dst_inc = 0; /* disable auto increment */
+ reqcfg.src_inc = 1; /* enable auto increment */
+ } else if (pl330->transfer_type == DMA_SUPPORTS_DEV_TO_MEM) {
+ reqcfg.dst_inc = 1;
+ reqcfg.src_inc = 0;
+ } else {
+ /* DMA_SUPPORTS_MEM_TO_MEM */
+ reqcfg.dst_inc = 1;
+ reqcfg.src_inc = 1;
+ }
+
+ reqcfg.nonsecure = 0; /* Secure mode */
+ reqcfg.dcctl = 0x1; /* noncacheable but bufferable */
+ reqcfg.scctl = 0x1;
+ reqcfg.privileged = 1; /* 1 - Priviledge */
+ reqcfg.insnaccess = 0; /* 0 - data access */
+ reqcfg.swap = 0; /* 0 - no endian swap */
+ reqcfg.brst_len = pl330->brst_len; /* DMA burst length */
+ reqcfg.brst_size = pl330->brst_size; /* DMA burst size */
+ /* Preparing the CCR value */
+ ccr = _prepare_ccr(&reqcfg);
+ /* DMAMOV CCR, ccr */
+ off += _emit_MOV(&pl330->buf[off], CCR, ccr);
+
+ /* BURST */
+ /* Can initiate a burst? */
+ while (len >= burst_size * pl330->brst_len) {
+ lcnt0 = len / (burst_size * pl330->brst_len);
+ lcnt1 = 0;
+ if (lcnt0 >= 256 * 256)
+ lcnt0 = lcnt1 = 256;
+ else if (lcnt0 >= 256) {
+ lcnt1 = lcnt0 / 256;
+ lcnt0 = 256;
+ }
+ len = len -
+ (burst_size * pl330->brst_len * lcnt0 * lcnt1);
+
+ if (lcnt1) {
+ /* DMALP1 */
+ off += _emit_LP(&pl330->buf[off], 1, lcnt1);
+ loopjmp1 = off;
+ }
+ /* DMALP0 */
+ off += _emit_LP(&pl330->buf[off], 0, lcnt0);
+ loopjmp0 = off;
+
+ off += _emit_STZ(&pl330->buf[off]);
+ /* DMALP0END */
+ struct _arg_LPEND lpend;
+ lpend.cond = ALWAYS;
+ lpend.forever = 0;
+ lpend.loop = 0; /* loop cnt 0 */
+ lpend.bjump = off - loopjmp0;
+ off += _emit_LPEND(&pl330->buf[off], &lpend);
+ /* DMALP1END */
+ if (lcnt1) {
+ struct _arg_LPEND lpend;
+ lpend.cond = ALWAYS;
+ lpend.forever = 0;
+ lpend.loop = 1; /* loop cnt 1*/
+ lpend.bjump = off - loopjmp1;
+ off += _emit_LPEND(&pl330->buf[off], &lpend);
+ }
+ /* ensure the microcode don't exceed buffer size */
+ if (off > pl330->buf_size) {
+ puts("ERROR PL330 : Exceed buffer size\n");
+ return 1;
+ }
+ }
+
+ /* SINGLE */
+ pl330->brst_size = pl330->single_brst_size;
+ pl330->brst_len = 1;
+ /* burst_size = 2 ^ brst_size */
+ burst_size = (1 << pl330->brst_size);
+ lcnt0 = len / (burst_size * pl330->brst_len);
+
+ /* ensure all data will be transfered */
+ len = len -
+ (burst_size * pl330->brst_len * lcnt0);
+ if (len)
+ puts("ERROR PL330 : Detected the possibility of untransfered"
+ "data. Please ensure correct single burst size\n");
+
+ if (lcnt0) {
+ /* Preparing the CCR value */
+ reqcfg.brst_len = pl330->brst_len; /* DMA burst length */
+ reqcfg.brst_size = pl330->brst_size; /* DMA burst size */
+ ccr = _prepare_ccr(&reqcfg);
+ /* DMAMOV CCR, ccr */
+ off += _emit_MOV(&pl330->buf[off], CCR, ccr);
+
+ /* DMALP0 */
+ off += _emit_LP(&pl330->buf[off], 0, lcnt0);
+ loopjmp0 = off;
+
+ off += _emit_STZ(&pl330->buf[off]);
+ struct _arg_LPEND lpend1;
+ lpend1.cond = ALWAYS;
+ lpend1.forever = 0;
+ lpend1.loop = 0; /* loop cnt 0 */
+ lpend1.bjump = off - loopjmp0;
+ off += _emit_LPEND(&pl330->buf[off], &lpend1);
+ /* ensure the microcode don't exceed buffer size */
+ if (off > pl330->buf_size) {
+ puts("ERROR PL330 : Exceed buffer size\n");
+ return 1;
+ }
+ }
+
+ /* DMAEND */
+ off += _emit_END(&pl330->buf[off]);
+
+ ret = pl330_transfer_start(pl330);
+ if (ret)
+ return ret;
+
+ ret = pl330_transfer_finish(pl330);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+#ifndef CONFIG_DMA
+void arm_pl330_transfer(struct pl330_transfer_struct *pl330)
+{
+ pl330_transfer_setup(pl330);
+}
+
+#else
+static int pl330_transfer(struct udevice *dev, int direction, void *dst,
+ void *src, size_t len)
+{
+ int ret = 0;
+ struct dma_pl330_platdata *priv = dev_get_priv(dev);
+ struct pl330_transfer_struct *pl330;
+
+ /* Allocate a new DMAC and its Channels */
+ pl330 = devm_kzalloc(dev, sizeof(*pl330), GFP_KERNEL);
+ if (!pl330)
+ return -ENOMEM;
+
+ pl330->reg_base = priv->base;
+
+ pl330->dst_addr = (unsigned int) (dst);
+ pl330->src_addr = (unsigned int) (src);
+ pl330->len = len;
+
+ /* channel 1 */
+ pl330->channel_num = 1;
+
+ switch(direction) {
+ case DMA_MEM_TO_MEM:
+ pl330->transfer_type = DMA_SUPPORTS_MEM_TO_MEM;
+ break;
+ case DMA_MEM_TO_DEV:
+ pl330->transfer_type = DMA_SUPPORTS_MEM_TO_DEV;
+ break;
+ case DMA_DEV_TO_MEM:
+ pl330->transfer_type = DMA_SUPPORTS_DEV_TO_MEM;
+ break;
+ }
+
+ ret = pl330_transfer_setup(pl330);
+
+ return ret;
+}
+
+static int pl330_ofdata_to_platdata(struct udevice *dev)
+{
+ struct dma_pl330_platdata *priv = dev_get_priv(dev);
+
+ priv->base = dev_get_addr(dev);
+
+ return 0;
+}
+
+static int pl330_probe(struct udevice *adev)
+{
+ struct dma_dev_priv *uc_priv = dev_get_uclass_priv(adev);
+
+ uc_priv->supported = (DMA_SUPPORTS_MEM_TO_MEM |
+ DMA_SUPPORTS_MEM_TO_DEV |
+ DMA_SUPPORTS_DEV_TO_MEM);
+ return 0;
+}
+
+static const struct dma_ops pl330_ops = {
+ .transfer = pl330_transfer,
+};
+
+static const struct udevice_id pl330_ids[] = {
+ { .compatible = "arm,pl330" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(dma_pl330) = {
+ .name = "dma_pl330",
+ .id = UCLASS_DMA,
+ .of_match = pl330_ids,
+ .ops = &pl330_ops,
+ .ofdata_to_platdata = pl330_ofdata_to_platdata,
+ .probe = pl330_probe,
+ .priv_auto_alloc_size = sizeof(struct dma_pl330_platdata),
+};
+#endif /* CONFIG_DMA */
--
2.8.3
More information about the U-Boot
mailing list