[U-Boot] [PATCH v7 18/21] mtd: nand: Kconfig: Add NAND_MXS entry
Jörg Krause
joerg.krause at embedded.rocks
Wed Oct 12 00:10:20 CEST 2016
On Sa, 2016-10-08 at 18:00 +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> Added kconfig for NAND_MXS driver.
>
> Cc: Scott Wood <oss at buserror.net>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Matteo Lisi <matteo.lisi at engicam.com>
> Cc: Michael Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> drivers/mtd/nand/Kconfig | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 5ce7d6d..df154bf 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -80,6 +80,13 @@ config NAND_ARASAN
> controller. This uses the hardware ECC for read and
> write operations.
>
> +config NAND_MXS
> + bool "MXS NAND support"
> + depends on MX6
Isn't mxs supposed to be i.MX23/i.MX28 and not i.MX6?
> + help
> + This enables NAND driver for the NAND flash controller on
> the
> + MXS processors.
> +
> comment "Generic NAND options"
>
> # Enhance depends when converting drivers to Kconfig which use this
> config
Best regards
Jörg Krause
More information about the U-Boot
mailing list