[U-Boot] [PATCH 1/3] ARM: AMx3xx: Allow arch specific code to use early DM

[Lokesh Vutla]

Early system initialization is being done before initf_dm is being called
in U-Boot. Then system will fail to boot if any of the DM enabled driver
is being called in this system initialization code. So, rearrange the
code a bit so that DM enabled drivers can be called during early system
initialization. This is inspired by commit e850ed82bce8 ("ARM: OMAP4+: Allow
arch specific code to use early DM")

Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 arch/arm/cpu/armv7/am33xx/board.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 68baded..1ba4ec5 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -270,15 +270,11 @@ static void watchdog_disable(void)
 		;
 }
 
-#ifdef CONFIG_SPL_BUILD
-void board_init_f(ulong dummy)
+void s_init(void)
 {
-	board_early_init_f();
-	sdram_init();
 }
-#endif
 
-void s_init(void)
+void early_system_init(void)
 {
 	/*
 	 * The ROM will only have set up sufficient pinmux to allow for the
@@ -297,4 +293,22 @@ void s_init(void)
 	rtc32k_enable();
 #endif
 }
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	early_system_init();
+	board_early_init_f();
+	sdram_init();
+}
 #endif
+
+#endif
+
+int arch_cpu_init_dm(void)
+{
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	early_system_init();
+#endif
+	return 0;
+}
-- 
2.9.3