[U-Boot] [RFC 2/4] dma: Kconfig: Add CONFIG_PL330_DMA entry

Marek Vasut marex at denx.de
Fri Oct 14 17:17:05 CEST 2016


On 10/10/2016 05:52 PM, Dinh Nguyen wrote:
> From: Dinh Nguyen <dinguyen at opensource.altera.com>
> 
> Add PL330_DMA entry.
> 
> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>

This should be wrapped into 1/4

> ---
>  drivers/dma/Kconfig  | 4 ++++
>  drivers/dma/Makefile | 1 +
>  2 files changed, 5 insertions(+)
> 
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index 1b92c77..d95f959 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -19,4 +19,8 @@ config TI_EDMA3
>  	  This driver support data transfer between memory
>  	  regions.
>  
> +config PL330_DMA
> +	bool "PL330 DMA driver"
> +	help
> +	  Enable the ARM PL330 DMA driver.
>  endmenu # menu "DMA Support"
> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> index 39b78b2..d287512 100644
> --- a/drivers/dma/Makefile
> +++ b/drivers/dma/Makefile
> @@ -13,3 +13,4 @@ obj-$(CONFIG_FSL_DMA) += fsl_dma.o
>  obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o
>  obj-$(CONFIG_TI_EDMA3) += ti-edma3.o
>  obj-$(CONFIG_DMA_LPC32XX) += lpc32xx_dma.o
> +obj-$(CONFIG_PL330_DMA) += pl330.o
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list