[U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.

[york sun]

On 10/13/2016 11:45 PM, Yao Yuan wrote:
> On 10/12/2016 08:00 PM, York Sun wrote:
>> On 10/11/2016 08:00 PM, Yao Yuan wrote:
>>>>
>>>> Yuan Yao,
>>>>
>>>> I think the procedure can be applied to many of our boards with QSPI,
>>>> right? It may be better to move this information out of ls2080aqds.
>>>>
>>>
>>> Hi York,
>>>
>>> Yes, but a little difference for "CCSR  write" for different boards.
>>> But the "CCSR write" should be wrote into uboot code or cw.
>>> So, should I remove the notes for "CCSR  write" and then move this
>>> information for  all the boards which support QSPI boot?
>>>
>>
>> I think you can put the common practice together with specific examples for
>> LS2080A, and other SoCs.
>>
>
> Hi York,
>
> If move this information out of ls2080aqds.
> Do you think where can I put the procedure for all the boards?
> In every board's README or somewhere for the common procedure?
>

Yao,

Take a look at these locations and decide which one fits best.

arch/arm/cpu/armv8/fsl-layerscape/doc/README.*
doc/README.fsl-qspi (you can create this)

York