[U-Boot] [PATCH v3 0/4] board: sama5d2_xplained: Convert to use device tree and drivers with DM

[Wenyou Yang]

Convert to use the drivers which support the driver model and use the
device tree. And add the support to enable an early debug UART for
debugging.

It is based on the following patches:
  - [PATCH v3] i2c: at91_i2c: Fix the wrong include file
  	http://lists.denx.de/pipermail/u-boot/2016-October/270249.html
  - [PATCH v2] clk: at91: Fix at91-pmc and at91-sckc's class ID
  	http://lists.denx.de/pipermail/u-boot/2016-September/266408.html
  - [PATCH v2] mmc: mmc-uclass: Add mmc_init() in mmc preinit phrase
  	http://lists.denx.de/pipermail/u-boot/2016-September/266409.html
  - [PATCH v3 0/2] serial: atmel_usart: Support to enable an early debug UART
  	http://lists.denx.de/pipermail/u-boot/2016-October/270250.html
  - [PATCH v9] dm: at91: Add driver model support for the spi driver
  	http://lists.denx.de/pipermail/u-boot/2016-September/266407.html
  - [PATCH] sf: fix sf probe
  	http://lists.denx.de/pipermail/u-boot/2016-August/264104.html

Changes in v3:
 - Collect Reviewed-by tag.
 - Collect Reviewed-by tag.
 - Collect Reviewed-by tag.
 - Rename CONFIG_AT24MAC_ADDR and CONFIG_AT24MAC_REG to AT24MAC_ADDR
   and AT24MAC_REG,  removing the prefix CONFIG_, to avoid compile
   warning.
 - Collect Reviewed-by tag.

Changes in v2:
 - Collect Reviewed-by tags.

Wenyou Yang (4):
  board: sama5d2_xplained: Move config options to defconfigs
  board: sama5d2_xplained: Clean up code
  board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC
  board: sama5d2_xplained: Enable an early debug UART

 board/atmel/sama5d2_xplained/sama5d2_xplained.c | 167 +++++++++---------------
 configs/sama5d2_xplained_mmc_defconfig          |  37 +++++-
 configs/sama5d2_xplained_spiflash_defconfig     |  37 +++++-
 include/configs/sama5d2_xplained.h              |  31 +----
 4 files changed, 144 insertions(+), 128 deletions(-)

-- 
2.7.4