[U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

[linux-kernel-dev]

>From: Jagan Teki [mailto:jagan at amarulasolutions.com]
>Sent: Montag, 17. Oktober 2016 14:49
>On Mon, Oct 17, 2016 at 6:14 PM, linux-kernel-dev
><linux-kernel-dev at beckhoff.com> wrote:
>>>From: Jagan Teki [mailto:jagan at amarulasolutions.com]
>>>Sent: Montag, 17. Oktober 2016 13:53
>>>>>>
>>>>>> Since, it's have dts support please use pinctrl driver for pads and
>>>>>> mux atleast for supporting ones.
>>>>>
>>>>>..but for MX53 this is still missing, right ?
>>>> Yes, as stated here:
>>>> http://lists.denx.de/pipermail/u-boot/2016-September/268517.html
>>>> I would like to add that in a second patch on top of this.
>>>
>>>I think pinctrl is not taking much time as most of the generic code
>>>already in at drivers/pinctrl/nxp/pinctrl-imx.c and once you did that
>>>board code mostly reduced, I see a point in this sense.
>>>
>> Please excuse my bad understanding, but I don't get what you mean by "I
>see a point in this sense."
>> Is it you agree to make the port in a second step. Or do you disagree and
>want the pinctrl patch first?
>
>Since board file as many of pad definition, I am saying better to add
>pinctrl for mx5 which doesn't take much time as most of the generic
>pinctrl is already there in drivers/pinctrl/nxp/pinctrl-imx.c
>
Thanks for making that clear.
I can try to send a patch for this within the next days.
Should the cx9020 changes be bundled with it? As without it, there would be code without use and I have no other imx53 board which I could port and test against.
Regards,
Patrick