[U-Boot] [PATCH 1/4] mx35: add DT support to flea3 board

Heiko Schocher hs at denx.de
Mon Oct 17 15:51:32 CEST 2016


Signed-off-by: Heiko Schocher <hs at denx.de>
---

 board/CarMediaLab/flea3/flea3.c | 24 ++++++++++++++++++++++++
 configs/flea3_defconfig         |  4 ++++
 2 files changed, 28 insertions(+)

diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c
index 2463077..be42863 100644
--- a/board/CarMediaLab/flea3/flea3.c
+++ b/board/CarMediaLab/flea3/flea3.c
@@ -19,6 +19,9 @@
 #include <asm/gpio.h>
 #include <asm/arch/sys_proto.h>
 #include <netdev.h>
+#include <fdt_support.h>
+#include <mtd_node.h>
+#include <jffs2/load_kernel.h>
 
 #ifndef CONFIG_BOARD_EARLY_INIT_F
 #error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
@@ -276,3 +279,24 @@ u32 get_board_rev(void)
 
 	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
 }
+
+/*
+ * called prior to booting kernel or by 'fdt boardsetup' command
+ *
+ */
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	struct node_info nodes[] = {
+		{ "physmap-flash.0", MTD_DEV_TYPE_NOR, },  /* NOR flash */
+		{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
+	};
+
+	if (getenv("fdt_noauto")) {
+		puts("   Skiping ft_board_setup (fdt_noauto defined)\n");
+		return 0;
+	}
+
+	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+
+	return 0;
+}
diff --git a/configs/flea3_defconfig b/configs/flea3_defconfig
index 7aa1ba8..c5ccbd6 100644
--- a/configs/flea3_defconfig
+++ b/configs/flea3_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_FLEA3=y
 CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
@@ -12,3 +13,6 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
+# CONFIG_EFI_LOADER is not set
-- 
2.5.5



More information about the U-Boot mailing list