[U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10

[Chin Liang See]

On Sen, 2016-10-17 at 15:42 +0200, Marek Vasut wrote:
> On 10/17/2016 03:32 PM, See, Chin Liang wrote:
> > 
> > On Min, 2016-10-16 at 17:33 +0200, Marek Vasut wrote:
> > > 
> > > On 10/13/2016 10:33 AM, Chin Liang See wrote:
> > > > 
> > > > 
> > > > Separate the Clock Manager to support both GEN5 SoC and
> > > > Stratix 10 SoC.
> > > > 
> > > > Signed-off-by: Chin Liang See <clsee at altera.com>
> > > > Cc: Marek Vasut <marex at denx.de>
> > > > Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> > > > Cc: Ley Foon Tan <lftan at altera.com>
> > > > Cc: Tien Fong Chee <tfchee at altera.com>
> > > > ---
> > > >  arch/arm/mach-socfpga/clock_manager.c | 8 ++++++++
> > > >  1 file changed, 8 insertions(+)
> > > > 
> > > > diff --git a/arch/arm/mach-socfpga/clock_manager.c
> > > > b/arch/arm/mach-
> > > > socfpga/clock_manager.c
> > > > index aa71636..0d67b3c 100644
> > > > --- a/arch/arm/mach-socfpga/clock_manager.c
> > > > +++ b/arch/arm/mach-socfpga/clock_manager.c
> > > > @@ -10,6 +10,7 @@
> > > > 
> > > >  DECLARE_GLOBAL_DATA_PTR;
> > > > 
> > > > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > > >  static const struct socfpga_clock_manager *clock_manager_base
> > > > =
> > > >       (struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
> > > > 
> > > > @@ -446,9 +447,11 @@ unsigned int cm_get_l4_sp_clk_hz(void)
> > > > 
> > > >       return clock;
> > > >  }
> > > > +#endif /* CONFIG_TARGET_SOCFPGA_GEN5 */
> > > > 
> > > >  unsigned int cm_get_mmc_controller_clk_hz(void)
> > > >  {
> > > > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > > >       uint32_t reg, clock = 0;
> > > > 
> > > >       /* identify the source of MMC clock */
> > > > @@ -475,8 +478,12 @@ unsigned int
> > > > cm_get_mmc_controller_clk_hz(void)
> > > >       /* further divide by 4 as we have fixed divider at
> > > > wrapper */
> > > >       clock /= 4;
> > > >       return clock;
> > > > +#elif defined(CONFIG_TARGET_SOCFPGA_STRATIX10)
> > > > +     return 25000000;
> > > Is this always gonna be the case or is this S10VP specific ?
> > > 
> > > > 
> > > > 
> > > > +#endif /* CONFIG_TARGET_SOCFPGA_GEN5 */
> > > >  }
> > > > 
> > > > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > > >  unsigned int cm_get_qspi_controller_clk_hz(void)
> > > >  {
> > > >       uint32_t reg, clock = 0;
> > > > @@ -556,3 +563,4 @@ U_BOOT_CMD(
> > > >       "display clocks",
> > > >       ""
> > > Why does the clock display not work on S10 ? Are some functions
> > > missing?
> > Not for SOCVP. But will be added in later stage when testing
> > against
> > emulation
> How hard would it be to add this missing functionality now ?
> 

That will take weeks as that need to be validated as whole in emulation
platform.

> > 
> > > 
> > > Maybe we should split the clock manager into common part and then
> > > gen5
> > > and gen10 specific parts ?
> > Ok, we can do that as initially we were worried too many files
> > created
> > within mach-socfpga.
> It's probably better than polluting the clock code with ifdefs.
> 

Ok, we have an consensus then

Thanks
Chin Liang


> [...]
> 
>