[U-Boot] [PATCH] ARM: zynq: Extend picozed board support

[Oscar Gomez Fuente]

Hi everyone,

It seems to be that the mailbox of the email address
albert.u.boot at aribaud.net is quota exceeded, and all emails are rejected.

-----
Final-Recipient: rfc822; albert.u.boot at aribaud.net.rmap1.bookmyname.com
Original-Recipient: rfc822;albert.u.boot at aribaud.net
Action: failed
Status: 5.0.0
Remote-MTA: dns; 127.0.0.1
Diagnostic-Code: smtp; 552 4.2.2
    <albert.u.boot at aribaud.net.rmap1.bookmyname.com>: Mailbox full -- Quota
    exceeded
...
-----

could anyone inform about that please?

Best regards.


[image: photo] Óscar Gómez Fuente
Electronic Engineer & Degree in Physical Sciences
Mobile: 659.28.97.90
Email: oscargomezf at gmail.com
Website: www.oscargomezf.com
<http://facebook.com/oscargomezf>  <http://plus.google.com/oscargomezf>
<http://us.linkedin.com/in/oscargomezf>
<http://twitter.com/oscargomezf_com>

On 18 October 2016 at 09:00, Michal Simek <michal.simek at xilinx.com> wrote:

> On 17.10.2016 17:33, Oscar Gomez Fuente wrote:
> > Ok Michal,
> >
> > Then you're suggesting change the zynq-picozed.dts file to:
>
> dtsi.
>
> >
> > diff --git a/arch/arm/dts/zynq-picozed.dts b/arch/arm/dts/zynq-picozed.
> dts
> > index 3408df8..d8ed298 100644
> > --- a/arch/arm/dts/zynq-picozed.dts
> > +++ b/arch/arm/dts/zynq-picozed.dts
> > @@ -14,6 +14,8 @@
> >
> >         aliases {
> >                 serial0 = &uart1;
> > +               spi0 = &qspi;
> > +               ethernet0 = &gem0;
> >         };
> >
> >         memory {
> > @@ -26,3 +28,18 @@
> >         u-boot,dm-pre-reloc;
> >         status = "okay";
> >  };
> > +
> > +&qspi {
> > +       u-boot,dm-pre-reloc;
> > +       status = "okay";
> > +};
>
> keep node names sorted.
>
> > +
> > +&gem0 {
> > +       status = "okay";
> > +       phy-mode = "rgmii-id";
> > +       phy-handle = <&ethernet_phy>;
> > +
> > +       ethernet_phy: ethernet-phy at 0 {
> > +               reg = <0>;
> > +       };
> > +};
> >
> > And add a new dts file with the configuration of the PizoZed FMC Carrier
> V2
> > (in this case V2. Avnet has two PicoZed FMC carriers V1 and V2). For
> > example: zynq-picozed-fmc-v2.dts
> >
> > *
> >  * Avnet PicoZed FMC carrier V2 DTS
> >  *
> >  * Copyright (C) 2015 Xilinx, Inc.
> >  *
> >  * SPDX-License-Identifier: GPL-2.0+
> >  */
> > /dts-v1/;
>
> Depends how zynq-picozed.dtsi will look but this line above can be
> already there.
>
> > #include "zynq-picozed.dts"
> >
> > / {
> > compatible = "xlnx,zynq-picozed", "xlnx,zynq-7000";
>
> here
> "xlnx,zynq-picozed-fmc-v2", "xlnx,zynq-picozed", "xlnx,zynq-7000";
>
>
> >
> > aliases {
> > mmc0 = &sdhci0;
> > };
> > };
> >
> > &sdhci0 {
> > u-boot,dm-pre-reloc;
> > status = "okay";
> > };
> >
> > Do you think the is the best way?
>
> with changes above it looks reasonable.
>
> Thanks,
> Michal
>
>