[U-Boot] [PATCH v6 5/6] armv8: fsl-layerscape: Add support for efi_loader RTS reset

[Alexander Graf]

When implementing efi loader support, we can expose runtime services
for payloads. One such service is CPU reset.

This patch implements RTS CPU reset support for layerscape systems.

Signed-off-by: Alexander Graf <agraf at suse.de>
Reviewed-by: York Sun <york.sun at nxp.com>

---

v4 -> v5:

  - Use __efi_runtime tags
---
 arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index b7a2e0c..0b516e3 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -17,6 +17,7 @@
 #ifdef CONFIG_MP
 #include <asm/arch/mp.h>
 #endif
+#include <efi_loader.h>
 #include <fm_eth.h>
 #include <fsl-mc/fsl_mc.h>
 #ifdef CONFIG_FSL_ESDHC
@@ -462,9 +463,10 @@ int timer_init(void)
 	return 0;
 }
 
-void reset_cpu(ulong addr)
+__efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
+
+void __efi_runtime reset_cpu(ulong addr)
 {
-	u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
 	u32 val;
 
 	/* Raise RESET_REQ_B */
@@ -473,6 +475,33 @@ void reset_cpu(ulong addr)
 	scfg_out32(rstcr, val);
 }
 
+#ifdef CONFIG_EFI_LOADER
+
+void __efi_runtime EFIAPI efi_reset_system(
+		       enum efi_reset_type reset_type,
+		       efi_status_t reset_status,
+		       unsigned long data_size, void *reset_data)
+{
+	switch (reset_type) {
+	case EFI_RESET_COLD:
+	case EFI_RESET_WARM:
+		reset_cpu(0);
+		break;
+	case EFI_RESET_SHUTDOWN:
+		/* Nothing we can do */
+		break;
+	}
+
+	while (1) { }
+}
+
+void efi_reset_system_init(void)
+{
+       efi_add_runtime_mmio(&rstcr, sizeof(*rstcr));
+}
+
+#endif
+
 phys_size_t board_reserve_ram_top(phys_size_t ram_size)
 {
 	phys_size_t ram_top = ram_size;
-- 
1.8.5.6