[U-Boot] [PATCH v7 2/5] net: fec_mxc: Convert into driver model
Jagan Teki
jagan at openedev.com
Wed Oct 19 19:35:30 CEST 2016
Hi Joe,
On Wed, Oct 19, 2016 at 4:53 PM, Jagan Teki <jteki at openedev.com> wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> This patch add driver model support for fec_mxc driver.
>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Joe Hershberger <joe.hershberger at ni.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Michael Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> drivers/net/fec_mxc.c | 313 ++++++++++++++++++++++++++++++++++++++++++--------
> drivers/net/fec_mxc.h | 4 +
> 2 files changed, 270 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index 0838d58..8c0927c 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -9,6 +9,7 @@
> */
>
> #include <common.h>
> +#include <dm.h>
> #include <malloc.h>
> #include <memalign.h>
> #include <net.h>
> @@ -368,11 +369,8 @@ static int fec_get_hwaddr(int dev_id, unsigned char *mac)
> return !is_valid_ethaddr(mac);
> }
>
> -static int fec_set_hwaddr(struct eth_device *dev)
> +static int _fec_set_hwaddr(struct fec_priv *fec, uchar *mac)
> {
> - uchar *mac = dev->enetaddr;
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> -
> writel(0, &fec->eth->iaddr1);
> writel(0, &fec->eth->iaddr2);
> writel(0, &fec->eth->gaddr1);
> @@ -426,9 +424,8 @@ static void fec_reg_setup(struct fec_priv *fec)
> * Start the FEC engine
> * @param[in] dev Our device to handle
> */
> -static int fec_open(struct eth_device *edev)
> +static int fec_open(struct fec_priv *fec)
> {
> - struct fec_priv *fec = (struct fec_priv *)edev->priv;
> int speed;
> uint32_t addr, size;
> int i;
> @@ -534,14 +531,13 @@ static int fec_open(struct eth_device *edev)
> return 0;
> }
>
> -static int fec_init(struct eth_device *dev, bd_t* bd)
> +static int _fec_init(struct fec_priv *fec, uchar *mac)
> {
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
> int i;
>
> /* Initialize MAC address */
> - fec_set_hwaddr(dev);
> + _fec_set_hwaddr(fec, mac);
>
> /*
> * Setup transmit descriptors, there are two in total.
> @@ -587,7 +583,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
> if (fec->xcv_type != SEVENWIRE)
> miiphy_restart_aneg(dev);
> #endif
> - fec_open(dev);
> + fec_open(fec);
> return 0;
> }
>
> @@ -595,9 +591,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
> * Halt the FEC engine
> * @param[in] dev Our device to handle
> */
> -static void fec_halt(struct eth_device *dev)
> +static void _fec_halt(struct fec_priv *fec)
> {
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> int counter = 0xffff;
>
> /*
> @@ -637,7 +632,7 @@ static void fec_halt(struct eth_device *dev)
> * @param[in] length Data count in bytes
> * @return 0 on success
> */
> -static int fec_send(struct eth_device *dev, void *packet, int length)
> +static int _fec_send(struct fec_priv *fec, void *packet, int length)
> {
> unsigned int status;
> uint32_t size, end;
> @@ -649,8 +644,6 @@ static int fec_send(struct eth_device *dev, void *packet, int length)
> * This routine transmits one frame. This routine only accepts
> * 6-byte Ethernet addresses.
> */
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> -
> /*
> * Check for valid length of data.
> */
> @@ -777,14 +770,14 @@ out:
> return ret;
> }
>
> +
> /**
> * Pull one frame from the card
> * @param[in] dev Our ethernet device to handle
> * @return Length of packet read
> */
> -static int fec_recv(struct eth_device *dev)
> +static int _fec_recv(struct fec_priv *fec, uchar *mac)
> {
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> struct fec_bd *rbd = &fec->rbd_base[fec->rbd_index];
> unsigned long ievent;
> int frame_length, len = 0;
> @@ -800,8 +793,8 @@ static int fec_recv(struct eth_device *dev)
> writel(ievent, &fec->eth->ievent);
> debug("fec_recv: ievent 0x%lx\n", ievent);
> if (ievent & FEC_IEVENT_BABR) {
> - fec_halt(dev);
> - fec_init(dev, fec->bd);
> + _fec_halt(fec);
> + _fec_init(fec, mac);
> printf("some error: 0x%08lx\n", ievent);
> return 0;
> }
> @@ -813,10 +806,10 @@ static int fec_recv(struct eth_device *dev)
> if (ievent & FEC_IEVENT_GRA) {
> /* Graceful stop complete */
> if (readl(&fec->eth->x_cntrl) & 0x00000001) {
> - fec_halt(dev);
> + _fec_halt(fec);
> writel(~0x00000001 & readl(&fec->eth->x_cntrl),
> &fec->eth->x_cntrl);
> - fec_init(dev, fec->bd);
> + _fec_init(fec, mac);
> }
> }
>
> @@ -970,6 +963,71 @@ static void fec_free_descs(struct fec_priv *fec)
> free(fec->tbd_base);
> }
>
> +struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
> +{
> + struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
> + struct mii_dev *bus;
> + int ret;
> +
> + bus = mdio_alloc();
> + if (!bus) {
> + printf("mdio_alloc failed\n");
> + return NULL;
> + }
> + bus->read = fec_phy_read;
> + bus->write = fec_phy_write;
> + bus->priv = eth;
> + fec_set_dev_name(bus->name, dev_id);
> +
> + ret = mdio_register(bus);
> + if (ret) {
> + printf("mdio_register failed\n");
> + free(bus);
> + return NULL;
> + }
> + fec_mii_setspeed(eth);
> + return bus;
> +}
> +
> +#ifndef CONFIG_DM_ETH
> +static int fec_recv(struct eth_device *dev)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> + uchar *mac = dev->enetaddr;
> +
> + return _fec_recv(fec, mac);
> +}
> +
> +static int fec_send(struct eth_device *dev, void *packet, int length)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> +
> + return _fec_send(fec, packet, length);
> +}
> +
> +static void fec_halt(struct eth_device *dev)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> +
> + _fec_halt(fec);
> +}
> +
> +static int fec_set_hwaddr(struct eth_device *dev)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> + uchar *mac = dev->enetaddr;
> +
> + return _fec_set_hwaddr(fec, mac);
> +}
> +
> +static int fec_init(struct eth_device *dev, bd_t *bd)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> + uchar *mac = dev->enetaddr;
> +
> + return _fec_init(fec, mac);
> +}
> +
> #ifdef CONFIG_PHYLIB
> int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
> struct mii_dev *bus, struct phy_device *phydev)
> @@ -1061,32 +1119,6 @@ err1:
> return ret;
> }
>
> -struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
> -{
> - struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
> - struct mii_dev *bus;
> - int ret;
> -
> - bus = mdio_alloc();
> - if (!bus) {
> - printf("mdio_alloc failed\n");
> - return NULL;
> - }
> - bus->read = fec_phy_read;
> - bus->write = fec_phy_write;
> - bus->priv = eth;
> - fec_set_dev_name(bus->name, dev_id);
> -
> - ret = mdio_register(bus);
> - if (ret) {
> - printf("mdio_register failed\n");
> - free(bus);
> - return NULL;
> - }
> - fec_mii_setspeed(eth);
> - return bus;
> -}
> -
> int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
> {
> uint32_t base_mii;
> @@ -1146,3 +1178,190 @@ int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int))
> return 0;
> }
> #endif
> +
> +#else
> +
> +static int fec_set_hwaddr(struct udevice *dev)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + uchar *mac = pdata->enetaddr;
> +
> + return _fec_set_hwaddr(fec, mac);
> +}
> +
> +static void fec_halt(struct udevice *dev)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> +
> + _fec_halt(fec);
> +}
> +
> +static int fec_recv(struct udevice *dev, int flags, uchar **packetp)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + uchar *mac = pdata->enetaddr;
> +
> + return _fec_recv(fec, mac);
> +}
> +
> +static int fec_send(struct udevice *dev, void *packet, int length)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> +
> + return _fec_send(fec, packet, length);
> +}
> +
> +static int fec_init(struct udevice *dev)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + uchar *mac = pdata->enetaddr;
> +
> + return _fec_init(fec, mac);
> +}
> +
> +static const struct eth_ops fecmxc_ops = {
> + .start = fec_init,
> + .send = fec_send,
> + .recv = fec_recv,
> + .stop = fec_halt,
> + .write_hwaddr = fec_set_hwaddr,
> +};
> +
> +static int fec_phy_init(struct fec_priv *priv, struct udevice *dev)
> +{
> + struct phy_device *phydev;
> + int mask = 0xffffffff;
> +
> +#ifdef CONFIG_PHYLIB
> + mask = 1 << CONFIG_FEC_MXC_PHYADDR;
> +#endif
> +
> + phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
> + if (!phydev)
> + return -ENODEV;
> +
> + phy_connect_dev(phydev, dev);
> +
> + priv->phydev = phydev;
> + phy_config(phydev);
> +
> + return 0;
> +}
> +
> +static int fecmxc_probe(struct udevice *dev)
> +{
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + struct fec_priv *priv = dev_get_priv(dev);
> + struct mii_dev *bus = NULL;
> + int dev_id = -1;
> + unsigned char ethaddr[6];
> + uint32_t start;
> + int ret;
> +
> + ret = fec_alloc_descs(priv);
> + if (ret)
> + return ret;
> +
> + bus = fec_get_miibus((uint32_t)priv->eth, dev_id);
> + if (!bus)
> + goto err_mii;
> +
> + priv->bus = bus;
> + priv->xcv_type = CONFIG_FEC_XCV_TYPE;
> + priv->interface = pdata->phy_interface;
> + ret = fec_phy_init(priv, dev);
> + if (ret)
> + goto err_phy;
> +
> + /* Reset chip. */
> + writel(readl(&priv->eth->ecntrl) | FEC_ECNTRL_RESET, &priv->eth->ecntrl);
> + start = get_timer(0);
> + while (readl(&priv->eth->ecntrl) & FEC_ECNTRL_RESET) {
> + if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
> + printf("FEC MXC: Timeout reseting chip\n");
> + goto err_timeout;
> + }
> + udelay(10);
> + }
> +
> + fec_reg_setup(priv);
> + priv->dev_id = (dev_id == -1) ? 0 : dev_id;
> +
> + ret = fec_get_hwaddr(dev_id, ethaddr);
> + if (!ret) {
> + debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr);
> + memcpy(pdata->enetaddr, ethaddr, 6);
> + if (!getenv("ethaddr"))
> + eth_setenv_enetaddr("ethaddr", ethaddr);
> + }
> +
> + return 0;
> +
> +err_timeout:
> + free(priv->phydev);
> +err_phy:
> + mdio_unregister(bus);
> + free(bus);
> +err_mii:
> + fec_free_descs(priv);
> + return ret;
> +}
> +
> +static int fecmxc_remove(struct udevice *dev)
> +{
> + struct fec_priv *priv = dev_get_priv(dev);
> +
> + free(priv->phydev);
> + fec_free_descs(priv);
> + mdio_unregister(priv->bus);
> + mdio_free(priv->bus);
> +
> + return 0;
> +}
> +
> +static int fecmxc_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + struct fec_priv *priv = dev_get_priv(dev);
> + const char *phy_mode;
> +
> + pdata->iobase = (phys_addr_t)dev_get_addr(dev);
> + priv->eth = (struct ethernet_regs *)pdata->iobase;
> +
> + pdata->phy_interface = -1;
> + phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
> + if (phy_mode)
> + pdata->phy_interface = phy_get_interface_by_name(phy_mode);
> + if (pdata->phy_interface == -1) {
> + debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
> + return -EINVAL;
> + }
> +
> + /* TODO
> + * Need to get the reset-gpio and related properties from DT
> + * and implemet the enet reset code on .probe call
> + */
> +
> + return 0;
> +}
> +
> +static const struct udevice_id fecmxc_ids[] = {
> + { .compatible = "fsl,imx6q-fec" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(fec_gem) = {
> + .name = "fecmxc",
> + .id = UCLASS_ETH,
> + .of_match = fecmxc_ids,
> + .ofdata_to_platdata = fecmxc_ofdata_to_platdata,
> + .probe = fecmxc_probe,
> + .remove = fecmxc_remove,
> + .ops = &fecmxc_ops,
> + .priv_auto_alloc_size = sizeof(struct fec_priv),
> + .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> +};
> +#endif
> diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
> index 0717cc6..9fc6153 100644
> --- a/drivers/net/fec_mxc.h
> +++ b/drivers/net/fec_mxc.h
> @@ -264,6 +264,10 @@ struct fec_priv {
> int phy_id;
> int (*mii_postcall)(int);
> #endif
> +
> +#ifdef CONFIG_DM_ETH
> + u32 interface;
> +#endif
> };
>
Any comment, otherwise please add Acked/Reviewd - We would like to
apply this trough Stefanos'.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list