[U-Boot] [PATCH v7 0/5] net: fec_mxc: Convert to DM

[Jagan Teki]

Hi Stefano,

On Wed, Oct 19, 2016 at 4:53 PM, Jagan Teki <jteki at openedev.com> wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> This series convert fec_mxc to DM and tested both dm and
> non-dm code and it is on top of [1] with u-boot-imx/master
> branch.
>
> Changes for v7:
> - Remove fec_set_dev_name in dm probe
>
> Changes for v6:
> - Add Acked-by tags in commit message
>
> Changes for v5:
> - Add stub fec calls to minimize the #ifdef's
> - Use same func names on eth_ops
> - Remove reset_gpio in fec_mxc.h
> - Add new patches, for cleanup driver
>
> Changes for v4:
> - rebase to u-boot-imx/master
>
> Changes for v3:
> - Add ARM: dts: imx6qdl-icore: Add FEC support
> - icorem6: Use CONFIG_DM_ETH support
>
> Changes for v2:
> - Add TODO for implementing the enet reset code
>
> [1] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support
>
> Jagan Teki (5):
>   net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr
>   net: fec_mxc: Convert into driver model
>   net: fec_mxc: Driver cleanups
>   ARM: dts: imx6qdl-icore: Add FEC support
>   icorem6: Use CONFIG_DM_ETH support
>
>  arch/arm/cpu/armv7/mx6/Kconfig       |   1 +
>  arch/arm/dts/imx6qdl-icore.dtsi      |  24 ++
>  board/engicam/icorem6/icorem6.c      |  71 -----
>  configs/imx6qdl_icore_mmc_defconfig  |   1 -
>  configs/imx6qdl_icore_nand_defconfig |   1 -
>  drivers/net/fec_mxc.c                | 516 +++++++++++++++++++++++------------
>  drivers/net/fec_mxc.h                |  31 +--
>  7 files changed, 378 insertions(+), 267 deletions(-)

Please apply this series along with [1]

[1] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.