[U-Boot] [PATCH] mmc: sdhci: assign to clk_mul when host version is upper than SD3.0
    Jaehoon Chung 
    jh80.chung at samsung.com
       
    Fri Oct 21 13:52:35 CEST 2016
    
    
  
To prevent the wrong value check the SD version.
Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
---
 drivers/mmc/sdhci.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 10ff57e..766e9ee 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -608,9 +608,11 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 	 * In case of Host Controller v3.00, find out whether clock
 	 * multiplier is supported.
 	 */
-	caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
-	host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
-			SDHCI_CLOCK_MUL_SHIFT;
+	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+		caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+		host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
+				SDHCI_CLOCK_MUL_SHIFT;
+	}
 
 	return 0;
 }
-- 
2.10.1
    
    
More information about the U-Boot
mailing list