[U-Boot] [PATCH v8 00/23] imx6: Add Engicam i.CoreM6 QDL support
Jagan Teki
jteki at openedev.com
Mon Oct 24 13:57:19 CEST 2016
From: Jagan Teki <jagan at amarulasolutions.com>
This series supports Engicam i.CoreM6 QDL modules on top of u-boot-imx/master
and test on the respective starter kits as well.
Tested both MMC and NAND boot.
Changes for v8:
- Rebase on u-boot-imx/master
- Add "configs: imx6qdl: Enable CONFIG_BLK if DM_MMC" patch
- Add "configs: imx6qdl: Enable CONFIG_DM_MMC_OPS if DM_MMC" patch
Changes for v7:
- Add patch to CONFIG_DEFAULT_FDT_FILE to defconfigs
- Rebase on u-boot-imx/master
Changes for v6:
- Rebase to u-boot-imx/master
- Move few SPL configs to defconfigs
Changes for v5:
- Add NAND support
Changes for v4:
- Add 'net: Kconfig: Add FEC_MXC entry' patch
- Updated ENV configs along with comments
- Restructured configs for more readability
- Add CONFIG_ENV_OVERWRITE
- Rename icorem6qdl_defconfig with icorem6qdl_mmc_defconfig
Changes for v3:
- Remove "v2 01/17 imx: iomux-v3: Fix build error with snvs base" patch
- Remove 'default n' on Kconfig DEFAULT_FDT_FILE patch
- Add minimal devicetree support for Engicam i.CoreM6 QDL
- Add is_mx6dl()
- Add is_mx6solo()
- Use is_mx6dq()
- Add last commit sha1 and header in pull devicetree files from Linux
Changes for v2:
- Make static to local iomux structure in board file
- Corrected rowaddr in mx6_ddr3_cfg
- Used imx_ddr_size
- Add FEC support and tested the same
- Add DM_GPIO, DM_MMC support
- Add pinctrl support
- Add devicetree support
Jagan Teki (23):
serial: Kconfig: Add MXC_UART entry
thermal: Kconfig: Add IMX_THERMAL entry
config: Move CONFIG_DEFAULT_FDT_FILE to defconfigs
arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support
net: Kconfig: Add FEC_MXC entry
imx6: icorem6: Add ENET support
imx: s/docs\/README.imximage/doc\/README.imximage/g
arm: dts: Add devicetree for i.MX6DL
arm: dts: Add devicetree for i.MX6DQL
arm: dts: imx6dl: Add pinctrl defines
dt-bindings: clock: imx6qdl: Add clock defines
arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo
imx6q: icorem6: Enable pinctrl driver
configs: imx6qdl: Enable CONFIG_BLK if DM_MMC
configs: imx6qdl: Enable CONFIG_DM_MMC_OPS if DM_MMC
engicam: icorem6: Add DM_GPIO, DM_MMC support
arm: dts: Add devicetree for i.MX6Q
arm: dts: imx6q: Add pinctrl defines
arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual
mtd: nand: Kconfig: Add NAND_MXS entry
imx6: icorem6: Add NAND support
imx6: icorem6: Enable MTD device support
imx6: icorem6: Add default mtd nand partition table
arch/arm/cpu/armv7/mx6/Kconfig | 11 +
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx6dl-icore.dts | 59 ++
arch/arm/dts/imx6dl-pinfunc.h | 1091 +++++++++++++++++++++++
arch/arm/dts/imx6dl.dtsi | 133 +++
arch/arm/dts/imx6q-icore.dts | 59 ++
arch/arm/dts/imx6q-pinfunc.h | 1047 ++++++++++++++++++++++
arch/arm/dts/imx6q.dtsi | 300 +++++++
arch/arm/dts/imx6qdl-icore.dtsi | 196 ++++
arch/arm/dts/imx6qdl.dtsi | 1281 +++++++++++++++++++++++++++
arch/arm/include/asm/imx-common/sys_proto.h | 2 +
board/barco/titanium/imximage.cfg | 2 +-
board/ccv/xpress/imximage.cfg | 2 +-
board/denx/m53evk/imximage.cfg | 2 +-
board/engicam/icorem6/Kconfig | 12 +
board/engicam/icorem6/MAINTAINERS | 6 +
board/engicam/icorem6/Makefile | 6 +
board/engicam/icorem6/README | 38 +
board/engicam/icorem6/icorem6.c | 537 +++++++++++
board/freescale/mx6sabresd/mx6dlsabresd.cfg | 2 +-
board/freescale/mx6slevk/imximage.cfg | 2 +-
board/freescale/mx6ullevk/imximage.cfg | 2 +-
board/freescale/mx7dsabresd/imximage.cfg | 2 +-
board/freescale/s32v234evb/s32v234evb.cfg | 2 +-
board/freescale/vf610twr/imximage.cfg | 2 +-
board/phytec/pcm052/imximage.cfg | 2 +-
board/technexion/pico-imx6ul/imximage.cfg | 2 +-
board/toradex/colibri_imx7/imximage.cfg | 2 +-
board/toradex/colibri_vf/imximage.cfg | 2 +-
board/warp/imximage.cfg | 2 +-
board/warp7/imximage.cfg | 2 +-
common/Kconfig | 5 +
configs/dms-ba16-1g_defconfig | 1 +
configs/dms-ba16_defconfig | 1 +
configs/ge_b450v3_defconfig | 1 +
configs/ge_b650v3_defconfig | 1 +
configs/ge_b850v3_defconfig | 1 +
configs/imx6qdl_icore_mmc_defconfig | 44 +
configs/imx6qdl_icore_nand_defconfig | 37 +
configs/mx25pdk_defconfig | 1 +
configs/mx53ard_defconfig | 1 +
configs/pico-imx6ul_defconfig | 1 +
configs/tqma6q_mba6_mmc_defconfig | 1 +
configs/tqma6q_mba6_spi_defconfig | 1 +
configs/tqma6s_mba6_mmc_defconfig | 1 +
configs/tqma6s_mba6_spi_defconfig | 1 +
configs/tqma6s_wru4_mmc_defconfig | 1 +
configs/zc5202_defconfig | 1 +
configs/zc5601_defconfig | 1 +
drivers/mtd/nand/Kconfig | 7 +
drivers/net/Kconfig | 7 +
drivers/serial/Kconfig | 7 +
drivers/thermal/Kconfig | 13 +
include/configs/advantech_dms-ba16.h | 1 -
include/configs/ge_bx50v3.h | 4 -
include/configs/imx6qdl_icore.h | 167 ++++
include/configs/mx25pdk.h | 2 -
include/configs/mx53ard.h | 2 -
include/configs/pico-imx6ul.h | 2 -
include/configs/tqma6_mba6.h | 6 -
include/configs/tqma6_wru4.h | 2 -
include/configs/zc5202.h | 2 -
include/configs/zc5601.h | 2 -
include/dt-bindings/clock/imx6qdl-clock.h | 274 ++++++
64 files changed, 5372 insertions(+), 39 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-icore.dts
create mode 100644 arch/arm/dts/imx6dl-pinfunc.h
create mode 100644 arch/arm/dts/imx6dl.dtsi
create mode 100644 arch/arm/dts/imx6q-icore.dts
create mode 100644 arch/arm/dts/imx6q-pinfunc.h
create mode 100644 arch/arm/dts/imx6q.dtsi
create mode 100644 arch/arm/dts/imx6qdl-icore.dtsi
create mode 100644 arch/arm/dts/imx6qdl.dtsi
create mode 100644 board/engicam/icorem6/Kconfig
create mode 100644 board/engicam/icorem6/MAINTAINERS
create mode 100644 board/engicam/icorem6/Makefile
create mode 100644 board/engicam/icorem6/README
create mode 100644 board/engicam/icorem6/icorem6.c
create mode 100644 configs/imx6qdl_icore_mmc_defconfig
create mode 100644 configs/imx6qdl_icore_nand_defconfig
create mode 100644 include/configs/imx6qdl_icore.h
create mode 100644 include/dt-bindings/clock/imx6qdl-clock.h
--
2.7.4
More information about the U-Boot
mailing list