[U-Boot] [PATCH 1/2] net: zynq_gem: Modify the nwcfg bit definitions

[Michal Simek]

From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>

Modify the nwcfg bit definitions to have 32-bit
by removing the extra nibble.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/net/zynq_gem.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 8b7c1be5d909..0023b1689efe 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -53,16 +53,16 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ZYNQ_GEM_NWCTRL_MDEN_MASK	0x00000010 /* Enable MDIO port */
 #define ZYNQ_GEM_NWCTRL_STARTTX_MASK	0x00000200 /* Start tx (tx_go) */
 
-#define ZYNQ_GEM_NWCFG_SPEED100		0x000000001 /* 100 Mbps operation */
-#define ZYNQ_GEM_NWCFG_SPEED1000	0x000000400 /* 1Gbps operation */
-#define ZYNQ_GEM_NWCFG_FDEN		0x000000002 /* Full Duplex mode */
-#define ZYNQ_GEM_NWCFG_FSREM		0x000020000 /* FCS removal */
-#define ZYNQ_GEM_NWCFG_SGMII_ENBL	0x080000000 /* SGMII Enable */
-#define ZYNQ_GEM_NWCFG_PCS_SEL		0x000000800 /* PCS select */
+#define ZYNQ_GEM_NWCFG_SPEED100		0x00000001 /* 100 Mbps operation */
+#define ZYNQ_GEM_NWCFG_SPEED1000	0x00000400 /* 1Gbps operation */
+#define ZYNQ_GEM_NWCFG_FDEN		0x00000002 /* Full Duplex mode */
+#define ZYNQ_GEM_NWCFG_FSREM		0x00020000 /* FCS removal */
+#define ZYNQ_GEM_NWCFG_SGMII_ENBL	0x80000000 /* SGMII Enable */
+#define ZYNQ_GEM_NWCFG_PCS_SEL		0x00000800 /* PCS select */
 #ifdef CONFIG_ARM64
-#define ZYNQ_GEM_NWCFG_MDCCLKDIV	0x000100000 /* Div pclk by 64, max 160MHz */
+#define ZYNQ_GEM_NWCFG_MDCCLKDIV	0x00100000 /* Div pclk by 64, max 160MHz */
 #else
-#define ZYNQ_GEM_NWCFG_MDCCLKDIV	0x0000c0000 /* Div pclk by 48, max 120MHz */
+#define ZYNQ_GEM_NWCFG_MDCCLKDIV	0x000c0000 /* Div pclk by 48, max 120MHz */
 #endif
 
 #ifdef CONFIG_ARM64
-- 
1.9.1