[U-Boot] [PATCH v3 07/10] ARM: PSCI: protect GIC specific code with ARM_GIC

[Antoine Tenart]

Introducing the ARM_GIC configuration option, use it to only use GIC
specific code in ARM PSCI function when the SoC has a GIC.

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
 arch/arm/cpu/armv7/nonsec_virt.S |  6 ++++++
 arch/arm/cpu/armv7/virt-v7.c     | 42 ++++++++++++++++++++++++++--------------
 2 files changed, 34 insertions(+), 14 deletions(-)

diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index 95ce9387b83e..2a11d2e83b80 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -164,6 +164,7 @@ ENDPROC(_smp_pen)
  * though, but we check this in C before calling this function.
  */
 ENTRY(_nonsec_init)
+#ifdef CONFIG_ARM_GIC
 	get_gicd_addr	r3
 
 	mvn	r1, #0				@ all bits to 1
@@ -175,6 +176,7 @@ ENTRY(_nonsec_init)
 	str	r1, [r3, #GICC_CTLR]		@ and clear all other bits
 	mov	r1, #0xff
 	str	r1, [r3, #GICC_PMR]		@ set priority mask register
+#endif
 
 	mrc	p15, 0, r0, c1, c1, 2
 	movw	r1, #0x3fff
@@ -200,7 +202,11 @@ ENTRY(_nonsec_init)
 	mcr	p15, 0, r1, c12, c0, 1		@ set MVBAR to secure vectors
 	isb
 
+#ifdef CONFIG_ARM_GIC
 	mov	r0, r3				@ return GICC address
+#else
+	mov	r0, #0
+#endif
 	bx	lr
 ENDPROC(_nonsec_init)
 
diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index d33e5c61a9c2..a34305853a34 100644
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -82,22 +82,11 @@ void __weak smp_kick_all_cpus(void)
 	kick_secondary_cpus_gic(gic_dist_addr);
 }
 
-__weak void psci_board_init(void)
-{
-}
-
-int armv7_init_nonsec(void)
+#ifdef CONFIG_ARM_GIC
+static int psci_gic_setup(void)
 {
-	unsigned int reg;
-	unsigned itlinesnr, i;
 	unsigned long gic_dist_addr;
-
-	/* check whether the CPU supports the security extensions */
-	reg = read_id_pfr1();
-	if ((reg & 0xF0) == 0) {
-		printf("nonsec: Security extensions not implemented.\n");
-		return -1;
-	}
+	unsigned itlinesnr, i;
 
 	/* the SCR register will be set directly in the monitor mode handler,
 	 * according to the spec one should not tinker with it in secure state
@@ -123,6 +112,31 @@ int armv7_init_nonsec(void)
 	for (i = 1; i <= itlinesnr; i++)
 		writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
 
+	return 0;
+}
+#endif
+
+__weak void psci_board_init(void)
+{
+}
+
+int armv7_init_nonsec(void)
+{
+	unsigned int reg;
+
+	/* check whether the CPU supports the security extensions */
+	reg = read_id_pfr1();
+	if ((reg & 0xF0) == 0) {
+		printf("nonsec: Security extensions not implemented.\n");
+		return -1;
+	}
+
+#ifdef CONFIG_ARM_GIC
+	int ret = psci_gic_setup();
+	if (ret)
+		return ret;
+#endif
+
 	psci_board_init();
 
 	/*
-- 
2.10.1