[U-Boot] [PATCH v8 05/23] net: Kconfig: Add FEC_MXC entry

[Jagan Teki]

On Wed, Oct 26, 2016 at 10:46 PM, Markus Niebel <niebelm at tqsc.de> wrote:
> Hello
>
> Am Montag, den 24.10.2016, 17:27 +0530 schrieb Jagan Teki:
>> From: Jagan Teki <jagan at amarulasolutions.com>
>>
>> Added kconfig for FEC_MXC driver.
>>
>> Cc: Joe Hershberger <joe.hershberger at gmail.com>
>> Cc: Simon Glass <sjg at chromium.org>
>> Cc: Fabio Estevam <fabio.estevam at nxp.com>
>> Cc: Stefano Babic <sbabic at denx.de>
>> Cc: Peng Fan <peng.fan at nxp.com>
>> Cc: Matteo Lisi <matteo.lisi at engicam.com>
>> Cc: Michael Trimarchi <michael at amarulasolutions.com>
>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>> ---
>>  drivers/net/Kconfig | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
>> index 302c005..7b9961d 100644
>> --- a/drivers/net/Kconfig
>> +++ b/drivers/net/Kconfig
>> @@ -129,6 +129,13 @@ config ETHOC
>>       help
>>         This MAC is present in OpenRISC and Xtensa XTFPGA boards.
>>
>> +config FEC_MXC
>> +     bool "FEC Ethernet controller"
> afaik this deriver is also used on i.MX53 / i.MX7 and others

Same comment as "[PATCH v8 01/23] serial: Kconfig: Add MXC_UART entry"

>> +     depends on MX6
>> +     help
> this IP-core supports 1GBit at least for i.MX6QDL and i.MX7

Thought it is but, I tested 100Mbps till now. Will update in future
once I get the data.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.