[U-Boot] [PATCH] imx: mx6ull: update the REFTOP_VBGADJ setting

[Peng Fan]

Hi Stefano,

Ping..

Thanks,
Peng.
On Sat, Oct 08, 2016 at 05:03:00PM +0800, Peng Fan wrote:
>According to design team, we need to set REFTOP_VBGADJ
>in PMU MISC0 according to the REFTOP_TRIM[2:0] fuse. the
>actually table is as below:
>
>  '000" - set REFTOP_VBGADJ[2:0] to 3'b000
>  '001" - set REFTOP_VBGADJ[2:0] to 3'b001
>  '010" - set REFTOP_VBGADJ[2:0] to 3'b010
>  '011" - set REFTOP_VBGADJ[2:0] to 3'b011
>  '100" - set REFTOP_VBGADJ[2:0] to 3'b100
>  '101" - set REFTOP_VBGADJ[2:0] to 3'b101
>  '110" - set REFTOP_VBGADJ[2:0] to 3'b110
>  '111" - set REFTOP_VBGADJ[2:0] to 3'b111
>
>Signed-off-by: Peng Fan <peng.fan at nxp.com>
>Signed-off-by: Bai Ping <ping.bai at nxp.com>
>---
> arch/arm/cpu/armv7/mx6/soc.c             | 31 ++++++++++++++++++++++++++-----
> arch/arm/include/asm/arch-mx6/crm_regs.h |  1 +
> 2 files changed, 27 insertions(+), 5 deletions(-)
>
>diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
>index 7b53bfd..dd94797 100644
>--- a/arch/arm/cpu/armv7/mx6/soc.c
>+++ b/arch/arm/cpu/armv7/mx6/soc.c
>@@ -300,9 +300,17 @@ static void clear_mmdc_ch_mask(void)
> 	writel(reg, &mxc_ccm->ccdr);
> }
> 
>+#define OCOTP_MEM0_REFTOP_TRIM_SHIFT          8
>+
> static void init_bandgap(void)
> {
> 	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
>+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
>+	struct fuse_bank *bank = &ocotp->bank[1];
>+	struct fuse_bank1_regs *fuse =
>+		(struct fuse_bank1_regs *)bank->fuse_regs;
>+	uint32_t val;
>+
> 	/*
> 	 * Ensure the bandgap has stabilized.
> 	 */
>@@ -315,13 +323,26 @@ static void init_bandgap(void)
> 	 */
> 	writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
> 	/*
>-	 * On i.MX6ULL, the LDO 1.2V bandgap voltage is 30mV higher. so set
>-	 * VBGADJ bits to 2b'110 to adjust it.
>+	 * On i.MX6ULL,we need to set VBGADJ bits according to the
>+	 * REFTOP_TRIM[3:0] in fuse table
>+	 *	000 - set REFTOP_VBGADJ[2:0] to 3b'110,
>+	 *	110 - set REFTOP_VBGADJ[2:0] to 3b'000,
>+	 *	001 - set REFTOP_VBGADJ[2:0] to 3b'001,
>+	 *	010 - set REFTOP_VBGADJ[2:0] to 3b'010,
>+	 *	011 - set REFTOP_VBGADJ[2:0] to 3b'011,
>+	 *	100 - set REFTOP_VBGADJ[2:0] to 3b'100,
>+	 *	101 - set REFTOP_VBGADJ[2:0] to 3b'101,
>+	 *	111 - set REFTOP_VBGADJ[2:0] to 3b'111,
> 	 */
>-	if (is_mx6ull())
>-		writel(BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ, &anatop->ana_misc0_set);
>-}
>+	if (is_mx6ull()) {
>+		val = readl(&fuse->mem0);
>+		val >>= OCOTP_MEM0_REFTOP_TRIM_SHIFT;
>+		val &= 0x7;
> 
>+		writel(val << BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ_SHIFT,
>+		       &anatop->ana_misc0_set);
>+	}
>+}
> 
> #ifdef CONFIG_MX6SL
> static void set_preclk_from_osc(void)
>diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
>index f74737a..29674ce 100644
>--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
>+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
>@@ -1272,6 +1272,7 @@ struct mxc_ccm_reg {
> 
> #define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
> #define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ 0x60
>+#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ_SHIFT 4
> 
> #define BM_PMU_MISC2_AUDIO_DIV_MSB (1 << 23)
> #define BP_PMU_MISC2_AUDIO_DIV_MSB 23
>-- 
>2.6.2
>