[U-Boot] [PATCH 10/11] sunxi: Add support for A80 Optimus board
Chen-Yu Tsai
wens at csie.org
Fri Oct 28 12:21:37 CEST 2016
The A80 Optimus Board was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, 2 USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 16G eMMC flash,
2G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
board/sunxi/MAINTAINERS | 5 +++++
configs/A80_Optimus_defconfig | 18 ++++++++++++++++++
2 files changed, 23 insertions(+)
create mode 100644 configs/A80_Optimus_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index f7129b7d53a5..6e0aa24eb859 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -94,6 +94,11 @@ M: Stefan Mavrodiev <stefan.mavrodiev at gmail.com>
S: Maintained
F: configs/A33-OLinuXino_defconfig
+A80 OPTIMUS BOARD
+M: Chen-Yu Tsai <wens at csie.org>
+S: Maintained
+F: configs/A80_Optimus_defconfig
+
AINOL AW1 BOARD
M: Paul Kocialkowski <contact at paulk.fr>
S: Maintained
diff --git a/configs/A80_Optimus_defconfig b/configs/A80_Optimus_defconfig
new file mode 100644
index 000000000000..6397de5de5fd
--- /dev/null
+++ b/configs/A80_Optimus_defconfig
@@ -0,0 +1,18 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN9I=y
+CONFIG_DRAM_CLK=672
+CONFIG_MMC0_CD_PIN="PH18"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH3"
+CONFIG_USB1_VBUS_PIN="PH4"
+CONFIG_USB3_VBUS_PIN="PH5"
+CONFIG_AXP_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_AXP809_POWER=y
--
2.9.3
More information about the U-Boot
mailing list