[U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support

[Stefano Babic]

On 28/10/2016 16:02, Jagan Teki wrote:
> On Thu, Oct 27, 2016 at 7:37 PM, Stefano Babic <sbabic at denx.de> wrote:
>> On 26/10/2016 18:35, Jagan Teki wrote:
>>> On Wed, Oct 26, 2016 at 8:38 PM, Stefano Babic <sbabic at denx.de> wrote:
>>>> Hi Jagan,
>>>>
>>>>
>>>> On 25/10/2016 08:23, Jagan Teki wrote:
>>>>> From: Jagan Teki <jagan at amarulasolutions.com>
>>>>>
>>>>> Add NAND support for Engicam i.CoreM6 qdl board.
>>>>>
>>>>> Boot Log:
>>>>> --------
>>>>>
>>>>> U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43)
>>>>> Trying to boot from NAND
>>>>> NAND : 512 MiB
>>>>>
>>>>> U-Boot 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43 +0530)
>>>>>
>>>>> CPU:   Freescale i.MX6SOLO rev1.3 at 792MHz
>>>>> CPU:   Industrial temperature grade (-40C to 105C) at 55C
>>>>> Reset cause: WDOG
>>>>> Model: Engicam i.CoreM6 DualLite/Solo Starter Kit
>>>>> DRAM:  256 MiB
>>>>> NAND:  512 MiB
>>>>> MMC:   FSL_SDHC: 0
>>>>> In:    serial
>>>>> Out:   serial
>>>>> Err:   serial
>>>>> Net:   FEC [PRIME]
>>>>> Hit any key to stop autoboot:  0
>>>>> icorem6qdl>
>>>>>
>>>>> Cc: Scott Wood <oss at buserror.net>
>>>>> Cc: Stefano Babic <sbabic at denx.de>
>>>>> Cc: Peng Fan <peng.fan at nxp.com>
>>>>> Cc: Matteo Lisi <matteo.lisi at engicam.com>
>>>>> Cc: Michael Trimarchi <michael at amarulasolutions.com>
>>>>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>>>>> ---
>>>>> Changes for v9:
>>>>> - Add below configs on defconfig
>>>>>   # CONFIG_BLK is not set
>>>>>   # CONFIG_DM_MMC_OPS is not set
>>>>
>>>> It was nice if it was set. But if you simply grep in this poathc, they
>>>> are not.  Just changelog was touched.
>>>>
>>>> But let's see what we can do to improve. I have merged patches up to 14
>>>> (without NAND support). I will push them to the server and they are part
>>>> of my next PR.
>>>>
>>>> As I propose, I could fix this myself in this patch if you agree - or
>>>> then please post the rest of patches, but after checking the board can
>>>> be built.
>>>
>>> I am OK, please fix from you side and also please apply this [1]
>>> series as well, all Acked-by Jeo
>>
>> All series applied to u-boot-imx, thanks !
> 
> Thanks.
> 
>>
>>>
>>> [1] [PATCH v7 0/5] net: fec_mxc: Convert to DM
>>
>> This is the next...
> 
> OK, that means the coming release right?

yes, I see there is already a lot of new patches in u-boot-imx - I'll
send my PR to Tom, and afterwards I start to check the pending patches.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================