[U-Boot] [PATCH 0/3] mx6: ddr: updates for dynamic DDR calibration
Eric Nelson
eric at nelint.com
Sun Oct 30 18:18:59 CET 2016
This set of patches updates the interface to the DDR calibration in
preparation for the addition of a pseudo-board for calibration on
i.MX6.
The first patch fixes an ommission in the use of the DG_CMP_CYC flag
in register MPDGCTRL0.
The second patch cleans up the handling of bus widths by passing
the system configuration information to the calibration routines.
The third routine adds support for returning the calibration data
written to the MMDC registers.
Eric Nelson (3):
mx6: ddr: allow 32 cycles for DQS gating calibration
mx6: ddr: pass mx6_ddr_sysinfo to calibration routines
mx6: ddr: add mmdc_read_calibration routine to return dynamic data
arch/arm/cpu/armv7/mx6/ddr.c | 128 +++++++++++++++++++++-----------
arch/arm/include/asm/arch-mx6/mx6-ddr.h | 6 +-
board/kosagi/novena/novena_spl.c | 4 +-
3 files changed, 92 insertions(+), 46 deletions(-)
--
2.7.4
More information about the U-Boot
mailing list