[U-Boot] S5PV210 boot problem

[smart]

Any suggestions? Should I provide more information?


On ۱۶/۱۰/۰۱ 02:55, nader last wrote:
> Good day,
>
> I have a custom HW around an s5pv210 soc. It's based on mini210 board 
> and uses u-boot v1.3.4 as its bootloader. I want to use a newer 
> version of u-boot to boot my HW.
> AFAIK in recent version of u-boot (e.g. v2016.09) GONI board is the 
> only supported HW which is based on s5pv210 too. I can successfully 
> compile the source with this configuration and burn it on an SD card. 
> But when I try to boot the HW, it complains about the checksum with 
> "SD checksum error" message. The script used to burn u-boot on the SD 
> card, calculates the checksum for the first 8192 bytes of u-boot.bin 
> and adds it somewhere which used to be working when the u-boot version 
> was v1.3.4.
> Any help would greatly be appreciated.
>
> Thank you for your time.
>
> Nasser