[U-Boot] [PATCH 5/7] igep003x: UBIize

[Ladislav Michl]

Convert IGEP board to use UBI volumes for U-Boot, its environment and
kernel. With exception of first four sectors read by SoC BootROM whole
NAND is UBI managed.

Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
---
 board/isee/igep003x/board.c       | 17 +++++++++++++++
 configs/am335x_igep0033_defconfig |  4 ++++
 include/configs/am335x_igep003x.h | 45 +++++++++++++++++++++++----------------
 3 files changed, 48 insertions(+), 18 deletions(-)

diff --git a/board/isee/igep003x/board.c b/board/isee/igep003x/board.c
index 5fea7ffaef..9abb4824b5 100644
--- a/board/isee/igep003x/board.c
+++ b/board/isee/igep003x/board.c
@@ -23,6 +23,9 @@
 #include <i2c.h>
 #include <miiphy.h>
 #include <cpsw.h>
+#include <fdt_support.h>
+#include <mtd_node.h>
+#include <jffs2/load_kernel.h>
 #include "board.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -104,6 +107,20 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+	static struct node_info nodes[] = {
+		{ "ti,omap2-nand", MTD_DEV_TYPE_NAND, },
+	};
+
+	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
+	return 0;
+}
+#endif
+
 #if defined(CONFIG_DRIVER_TI_CPSW)
 static void cpsw_control(int enabled)
 {
diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig
index 12f04c68f9..71e11da17a 100644
--- a/configs/am335x_igep0033_defconfig
+++ b/configs/am335x_igep0033_defconfig
@@ -13,6 +13,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0033"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
@@ -41,9 +42,12 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
 CONFIG_EFI_PARTITION=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
 # CONFIG_GENERATE_SMBIOS_TABLE is not set
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index 348b16f3e8..f7209930d3 100644
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -21,7 +21,7 @@
 #define V_OSCK				24000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)
 
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+#define CONFIG_ENV_SIZE			(96 << 10)	/*  96 KiB */
 
 /* Make the verbose messages from UBI stop printing */
 #define CONFIG_UBI_SILENCE_MSG
@@ -67,11 +67,11 @@
 		"fi;\0" \
 	"mtdids=" MTDIDS_DEFAULT "\0" \
 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-	"nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=1\0" \
 	"nandrootfstype=ubifs rootwait\0" \
-	"nandload=ubi part filesystem 2048; ubifsmount ubi0; " \
-		"ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \
-		"ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \
+	"nandload=ubi part UBI; " \
+		"ubi read ${loadaddr} kernel; " \
+		"ubi read ${fdtaddr} dtb \0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"root=${nandroot} " \
@@ -97,12 +97,6 @@
 /* NAND support */
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_ONFI_DETECTION	1
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0x180000 /* environment starts here */
-#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
 
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
@@ -110,9 +104,7 @@
 #define CONFIG_LZO
 
 #define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(spl),"\
-					"1m(uboot),256k(environment),"\
-					"-(filesystem)"
+#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(SPL),-(UBI)"
 
 /* Unsupported features */
 #undef CONFIG_USE_IRQ
@@ -120,6 +112,27 @@
 /* SPL */
 #define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
 
+/* UBI configuration */
+#define CONFIG_SPL_UBI			1
+#define CONFIG_SPL_UBI_MAX_VOL_LEBS	256
+#define CONFIG_SPL_UBI_MAX_PEB_SIZE	(256*1024)
+#define CONFIG_SPL_UBI_MAX_PEBS		4096
+#define CONFIG_SPL_UBI_VOL_IDS		8
+#define CONFIG_SPL_UBI_LOAD_MONITOR_ID	0
+#define CONFIG_SPL_UBI_LOAD_KERNEL_ID	3
+#define CONFIG_SPL_UBI_LOAD_ARGS_ID	4
+#define CONFIG_SPL_UBI_PEB_OFFSET	4
+#define CONFIG_SPL_UBI_VID_OFFSET	512
+#define CONFIG_SPL_UBI_LEB_START	2048
+#define CONFIG_SPL_UBI_INFO_ADDR	0x88080000
+
+/* environment organization */
+#define CONFIG_ENV_IS_IN_UBI		1
+#define CONFIG_ENV_UBI_PART		"UBI"
+#define CONFIG_ENV_UBI_VOLUME		"config"
+#define CONFIG_ENV_UBI_VOLUME_REDUND	"config_r"
+
+/* NAND config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					 CONFIG_SYS_NAND_PAGE_SIZE)
@@ -139,8 +152,4 @@
 #define CONFIG_SYS_NAND_ECCBYTES	14
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 
-#define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-
 #endif	/* ! __CONFIG_IGEP003X_H */
-- 
2.11.0