[U-Boot] u-boot-sunxi/master: Buildman issues
Jagan Teki
jagannadh.teki at gmail.com
Tue Apr 4 05:43:13 UTC 2017
Full Log:
----------
boards.cfg is up to date. Nothing to do.
Summary of 36 commits for 1275 boards (12 threads, 1 job per thread)
01: sunxi: fix ACTLR.SMP assembly routine
aarch64: + orangepi_pc2
blackfin: + cm-bf561 blackstamp bf527-ezkit-v2 br4 cm-bf527
bf506f-ezkit ip04 bf527-sdp bf527-ad7160-eval bf609-ezkit tcm-bf518
bf527-ezkit bf533-ezkit ibf-dsp561 bf537-minotaur bf537-pnav
bf537-srv1 cm-bf548 bf548-ezkit bf525-ucr2 blackvme pr1 bf518f-ezbrd
bf526-ezbrd
x86: + galileo conga-qeval20-qa3-e3845-internal-uart
qemu-x86_64 conga-qeval20-qa3-e3845 bayleybay
theadorable-x86-dfi-bt700 qemu-x86_efi_payload64 minnowmax
dfi-bt700-q7x-151 som-db5800-som-6867 chromebook_link64
arm: + CHIP_pro sun8i_a23_evb nanopi_neo_air Sunchip_CX-A99
mx6sxsabreauto
+/bin/sh: 1: bfin-uclinux-ldr: not found
+make[1]: *** [u-boot.ldr] Error 127
+make: *** [sub-make] Error 2
+make[1]: bfin-uclinux-ldr: Command not found
+/bin/sh: 1: iasl: not found
+mv: cannot stat '../board/intel/galileo/dsdt.hex': No such file or directory
+make[2]: *** [board/intel/galileo/dsdt.c] Error 1
+make[1]: *** [board/intel/galileo] Error 2
+ if (i2c_read(chip, addr, 1, &valb, 1))
+ ^
+ return i2c_write(chip, addr, 1, &valb, 1);
+cc1: error: -mcpu=bf506-0.0 is not valid
+cc1: error: unrecognized command line option '-mcpu=bf506-0.0'
+make[2]: *** [u-boot.cfg] Error 1
+make[1]: *** No rule to make target `include/config/auto.conf',
needed by `include/config/uboot.release'. Stop.
+cc1: error: -mcpu=bf609-0.0 is not valid
+cc1: error: unrecognized command line option '-mcpu=bf609-0.0'
+mv: cannot stat '../board/congatec/conga-qeval20-qa3-e3845/dsdt.hex':
No such file or directory
+make[2]: *** [board/congatec/conga-qeval20-qa3-e3845/dsdt.c] Error 1
+make[1]: *** [board/congatec/conga-qeval20-qa3-e3845] Error 2
+make[2]: *** [orangepi_pc2_defconfig] Error 1
+make[1]: *** [orangepi_pc2_defconfig] Error 2
+make[2]: *** [CHIP_pro_defconfig] Error 1
+make[1]: *** [CHIP_pro_defconfig] Error 2
+mv: cannot stat '../board/dfi/dfi-bt700/dsdt.hex': No such file or directory
+make[2]: *** [board/dfi/dfi-bt700/dsdt.c] Error 1
+make[1]: *** [board/dfi/dfi-bt700] Error 2
+In file included from ../arch/x86/include/asm/bitops.h:18:0,
+ from ../include/linux/bitops.h:123,
+ from ../include/common.h:25,
+ from ../lib/asm-offsets.c:15:
+ if (!(word & (~0ul << 32))) {
+ ^
+ word <<= 32;
+ if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
+ if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
+ if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
+ if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
+ if (!(word & (~0ul << (BITS_PER_LONG-1))))
+ from ../arch/x86/lib/asm-offsets.c:15:
+ from ../arch/x86/cpu/cpu.c:22:
+ from ../arch/x86/cpu/cpu_x86.c:7:
+ from ../arch/x86/cpu/intel_common/cpu.c:7:
+ from ../arch/x86/cpu/intel_common/lpc.c:7:
+ from ../arch/x86/cpu/intel_common/microcode.c:10:
+../arch/x86/cpu/intel_common/microcode.c: In function 'microcode_read_rev':
+../arch/x86/cpu/intel_common/microcode.c:79:2: error: PIC register
clobbered by 'ebx' in 'asm'
+ asm volatile (
+make[3]: *** [arch/x86/cpu/intel_common/microcode.o] Error 1
+make[2]: *** [arch/x86/cpu/intel_common] Error 2
+make[1]: *** [arch/x86/cpu] Error 2
+mv: cannot stat '../board/intel/bayleybay/dsdt.hex': No such file or directory
+make[2]: *** [board/intel/bayleybay/dsdt.c] Error 1
+make[1]: *** [board/intel/bayleybay] Error 2
+make[2]: *** [sun8i_a23_evb_defconfig] Error 1
+make[1]: *** [sun8i_a23_evb_defconfig] Error 2
+../arch/x86/lib/crt0_x86_64_efi.S: Assembler messages:
+../arch/x86/lib/crt0_x86_64_efi.S:16: Error: bad register name `%rsp'
+../arch/x86/lib/crt0_x86_64_efi.S:17: Error: bad register name `%rcx'
+../arch/x86/lib/crt0_x86_64_efi.S:18: Error: bad register name `%rdx'
+../arch/x86/lib/crt0_x86_64_efi.S:21: Error: bad register name `%rip)'
+../arch/x86/lib/crt0_x86_64_efi.S:22: Error: bad register name `%rip)'
+../arch/x86/lib/crt0_x86_64_efi.S:24: Error: bad register name `%rcx'
+../arch/x86/lib/crt0_x86_64_efi.S:25: Error: bad register name `%rdx'
+../arch/x86/lib/crt0_x86_64_efi.S:26: Error: bad register name `%rcx'
+../arch/x86/lib/crt0_x86_64_efi.S:27: Error: bad register name `%rdx'
+../arch/x86/lib/crt0_x86_64_efi.S:30: Error: bad register name `%rdi'
+../arch/x86/lib/crt0_x86_64_efi.S:31: Error: bad register name `%rsi'
+../arch/x86/lib/crt0_x86_64_efi.S:34: Error: bad register name `%rsp'
+../arch/x86/lib/crt0_x86_64_efi.S:47: Warning: setting incorrect
section attributes for .reloc
+make[2]: *** [arch/x86/lib/crt0_x86_64_efi.o] Error 1
+make[1]: *** [arch/x86/lib] Error 2
+make[2]: *** [Sunchip_CX-A99_defconfig] Error 1
+make[1]: *** [Sunchip_CX-A99_defconfig] Error 2
+make[2]: *** [nanopi_neo_air_defconfig] Error 1
+make[1]: *** [nanopi_neo_air_defconfig] Error 2
+mv: cannot stat '../board/intel/minnowmax/dsdt.hex': No such file or directory
+make[2]: *** [board/intel/minnowmax/dsdt.c] Error 1
+make[1]: *** [board/intel/minnowmax] Error 2
+mv: cannot stat '../board/advantech/som-db5800-som-6867/dsdt.hex': No
such file or directory
+make[2]: *** [board/advantech/som-db5800-som-6867/dsdt.c] Error 1
+make[1]: *** [board/advantech/som-db5800-som-6867] Error 2
w+../drivers/gpio/pca953x.c: In function 'pca953x_reg_write':
w+../drivers/gpio/pca953x.c:68:3: warning: implicit declaration of
function 'i2c_read' [-Wimplicit-function-declaration]
w+../drivers/gpio/pca953x.c:74:3: warning: implicit declaration of
function 'i2c_write' [-Wimplicit-function-declaration]
w+../drivers/usb/musb/musb_hcd.c: In function 'config_hub_port':
w+../drivers/usb/musb/musb_hcd.c:405:5: warning: variable 'hub' set
but not used [-Wunused-but-set-variable]
w+../drivers/usb/musb/musb_core.c: In function 'musb_configure_ep':
w+../drivers/usb/musb/musb_core.c:71:6: warning: variable 'idx' set
but not used [-Wunused-but-set-variable]
w+../board/bf533-ezkit/flash.c: In function 'read_data':
w+../board/bf533-ezkit/flash.c:241:6: warning: variable 'iShift' set
but not used [-Wunused-but-set-variable]
w+../drivers/net/ax88180.c: In function 'ax88180_mac_reset':
w+../drivers/net/ax88180.c:132:16: warning: variable 'tmpval' set but
not used [-Wunused-but-set-variable]
w+../drivers/net/ax88180.c: In function 'ax88180_recv':
w+../drivers/net/ax88180.c:577:17: warning: variable 'tmp_regval' set
but not used [-Wunused-but-set-variable]
w+../include/asm-generic/bitops/__fls.h: In function '__fls':
w+../include/asm-generic/bitops/__fls.h:17:2: warning: left shift
count >= width of type
w+../include/asm-generic/bitops/__fls.h:19:3: warning: left shift
count >= width of type
w+../include/asm-generic/bitops/__fls.h:22:2: warning: left shift
count >= width of type
w+../include/asm-generic/bitops/__fls.h:26:2: warning: left shift
count >= width of type
w+../include/asm-generic/bitops/__fls.h:30:2: warning: left shift
count >= width of type
w+../include/asm-generic/bitops/__fls.h:34:2: warning: left shift
count >= width of type
w+../include/asm-generic/bitops/__fls.h:38:2: warning: left shift
count >= width of type
02: ARM: rename CONFIG_TIMER_CLK_FREQ to COUNTER_FREQUENCY
03: fsl: ls102x: remove redundant GENERIC_TIMER_CLK
04: sunxi: simplify ACTLR.SMP bit set #ifdef
05: sunxi: configs: merge sun9i and sun50i SPL memory definitions
06: sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM
07: sunxi: provide ARMv8 mem_map for every ARM64 board
08: SPI: SPL: sunxi: fix 64-bit build
09: sunxi: DRAM: add Allwinner H5 support
10: sunxi: prepare for sharing MACH_SUN8I_H3 config symbol
11: sunxi: introduce Allwinner H5 config option
12: sunxi: Add OrangePi PC 2 initial support
-make[2]: *** [orangepi_pc2_defconfig] Error 1
-make[1]: *** [orangepi_pc2_defconfig] Error 2
+ERROR: File too large!
+make[2]: *** [spl/sunxi-spl.bin] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
13: sunxi: add NanoPi NEO Air defconfig
arm: nanopi_neo_air
-make[2]: *** [nanopi_neo_air_defconfig] Error 1
-make[1]: *** [nanopi_neo_air_defconfig] Error 2
14: nand: sunxi: Fix modulo by zero error
15: bch: Allow to build for the host
16: tools: sunxi: Add spl image builder
17: common: Move environment choice to Kconfig
arm: + Nintendo_NES_Classic_Edition CHIP
+In file included from ../include/common.h:987:0,
+../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared
here (not in a function)
+ #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
+ ^
+../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
+ unsigned char data[ENV_SIZE]; /* Environment data */
+ ^
+make[2]: *** [lib/asm-offsets.s] Error 1
+make[1]: *** [prepare0] Error 2
18: cmd: Add Kconfig option for CMD_MTDPARTS and related options
19: mtd: ubi: Select RBTREE option from MTD_UBI Kconfig entry
20: cmd: Expose a Kconfig option to enable UBIFS commands
21: cmd: nand: Expose optional suboptions in Kconfig
22: mtd: sunxi: Select the U-Boot location config option
23: mtd: sunxi: Change U-Boot offset
24: sunxi: Enable UBI and NAND support
-In file included from ../include/common.h:987:0,
-../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared
here (not in a function)
- #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
-../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
- unsigned char data[ENV_SIZE]; /* Environment data */
- ^
-make[2]: *** [lib/asm-offsets.s] Error 1
-make[1]: *** [prepare0] Error 2
-ERROR: File too large!
-make[2]: *** [spl/sunxi-spl.bin] Error 1
-make[1]: *** [spl/u-boot-spl] Error 2
+../cmd/nand.c: In function 'set_dev':
+../cmd/nand.c:118:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
(first use in this function)
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev]) {
+ ^
+../cmd/nand.c:118:24: note: each undeclared identifier is reported
only once for each function it appears in
+../cmd/nand.c: In function 'do_nand':
+../cmd/nand.c:400:19: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
(first use in this function)
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
+../cmd/nand.c: In function 'do_nandboot':
+../cmd/nand.c:994:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
(first use in this function)
+ if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx]) {
+make[2]: *** [cmd/nand.o] Error 1
+make[1]: *** [cmd] Error 2
25: sunxi: Add the default mtdids and mtdparts to our env
26: nand: sunxi: Add options for the SPL NAND configuration
27: scripts: sunxi: Build an raw SPL image
28: sunxi: Sync GR8 DTS and AXP209 with the kernel
29: sunxi: Add support for the CHIP Pro
arm: CHIP_pro
-make[2]: *** [CHIP_pro_defconfig] Error 1
-make[1]: *** [CHIP_pro_defconfig] Error 2
30: ARM: dts: sun9i: Add mmc1 pinmux setting
31: arm: sunxi: Add Sunchip CX-A99 initial support
-make[2]: *** [Sunchip_CX-A99_defconfig] Error 1
-make[1]: *** [Sunchip_CX-A99_defconfig] Error 2
32: sunxi: Add boards/sunxi and arch/arm/mach-sunxi to sunxi MAINTAINERS entry
33: cmd: ubifs: Add a dependency on CMD_UBI
34: cmd: nand: Make the NAND options default to NAND_SUNXI
arm: Sunchip_CX-A99
-../cmd/nand.c: In function 'set_dev':
-../cmd/nand.c:118:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
(first use in this function)
- if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev]) {
- ^
-../cmd/nand.c:118:24: note: each undeclared identifier is reported
only once for each function it appears in
-../cmd/nand.c: In function 'do_nand':
-../cmd/nand.c:400:19: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
(first use in this function)
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
-../cmd/nand.c: In function 'do_nandboot':
-../cmd/nand.c:994:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
(first use in this function)
- if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx]) {
-make[2]: *** [cmd/nand.o] Error 1
-make[1]: *** [cmd] Error 2
+In file included from ../include/common.h:987:0,
+../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared
here (not in a function)
+ #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
+../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
+ unsigned char data[ENV_SIZE]; /* Environment data */
+ ^
+make[2]: *** [lib/asm-offsets.s] Error 1
+make[1]: *** [prepare0] Error 2
+ERROR: File too large!
+make[2]: *** [spl/sunxi-spl.bin] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
35: sunxi: Add default environment size
arm: Nintendo_NES_Classic_Edition CHIP
-In file included from ../include/common.h:987:0,
-../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared
here (not in a function)
- #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
- ^
-../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
- unsigned char data[ENV_SIZE]; /* Environment data */
- ^
-make[2]: *** [lib/asm-offsets.s] Error 1
-make[1]: *** [prepare0] Error 2
36: sunxi: Add defconfig for Allwinner A23 EVB
arm: sun8i_a23_evb
-make[2]: *** [sun8i_a23_evb_defconfig] Error 1
-make[1]: *** [sun8i_a23_evb_defconfig] Error 2
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list