[U-Boot] [PATCH v3 1/2] mx6sabresd: Make SPL DDR configuration to match the DCD table

[Jagan Teki]

On Tue, Apr 4, 2017 at 9:20 PM, Fabio Estevam <festevam at gmail.com> wrote:
> On Tue, Apr 4, 2017 at 12:47 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>> Any help?
>
> Sorry, didn't have time to look at this issue.
>
> At least SPL U-Boot boots fine in this board. Can you also try U-Boot
> from NXP and try to debug it?

No, this isn't issue, just want to understand how you create reg init
in SPL in mx6q_dcd_table, means did you follow any order. because I'm
planning move *dl.cfg DCD to SPL

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.