[U-Boot] [PATCH v2 02/18] stm32f7: sdram: move sdram driver code to ram drivers area
Vikas Manocha
vikas.manocha at st.com
Tue Apr 4 21:45:04 UTC 2017
Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
cc: Christophe KERELLO <christophe.kerello at st.com>
---
Changed in v2: None
board/st/stm32f746-disco/stm32f746-disco.c | 113 +--------------------------
configs/stm32f746-disco_defconfig | 2 +
drivers/ram/Kconfig | 8 ++
drivers/ram/Makefile | 1 +
drivers/ram/stm32_sdram.c | 119 +++++++++++++++++++++++++++++
5 files changed, 131 insertions(+), 112 deletions(-)
create mode 100644 drivers/ram/stm32_sdram.c
diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
index fdad8d1..1569358 100644
--- a/board/st/stm32f746-disco/stm32f746-disco.c
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -10,7 +10,6 @@
#include <asm/armv7m.h>
#include <asm/arch/stm32.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/fmc.h>
#include <dm/platdata.h>
#include <dm/platform_data/serial_stm32x7.h>
#include <asm/arch/stm32_periph.h>
@@ -106,57 +105,8 @@ out:
return rv;
}
-static inline u32 _ns2clk(u32 ns, u32 freq)
-{
- u32 tmp = freq/1000000;
- return (tmp * ns) / 1000;
-}
-
-#define NS2CLK(ns) (_ns2clk(ns, freq))
-
-/*
- * Following are timings for IS42S16400J, from corresponding datasheet
- */
-#define SDRAM_CAS 3 /* 3 cycles */
-#define SDRAM_NB 1 /* Number of banks */
-#define SDRAM_MWID 1 /* 16 bit memory */
-
-#define SDRAM_NR 0x1 /* 12-bit row */
-#define SDRAM_NC 0x0 /* 8-bit col */
-#define SDRAM_RBURST 0x1 /* Single read requests always as bursts */
-#define SDRAM_RPIPE 0x0 /* No HCLK clock cycle delay */
-
-#define SDRAM_TRRD NS2CLK(12)
-#define SDRAM_TRCD NS2CLK(18)
-#define SDRAM_TRP NS2CLK(18)
-#define SDRAM_TRAS NS2CLK(42)
-#define SDRAM_TRC NS2CLK(60)
-#define SDRAM_TRFC NS2CLK(60)
-#define SDRAM_TCDL (1 - 1)
-#define SDRAM_TRDL NS2CLK(12)
-#define SDRAM_TBDL (1 - 1)
-#define SDRAM_TREF (NS2CLK(64000000 / 8192) - 20)
-#define SDRAM_TCCD (1 - 1)
-
-#define SDRAM_TXSR SDRAM_TRFC /* Row cycle time after precharge */
-#define SDRAM_TMRD 1 /* Page 10, Mode Register Set */
-
-
-/* Last data in to row precharge, need also comply ineq on page 1648 */
-#define SDRAM_TWR max(\
- (int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD)), \
- (int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP)\
-)
-
-
-#define SDRAM_MODE_BL_SHIFT 0
-#define SDRAM_MODE_CAS_SHIFT 4
-#define SDRAM_MODE_BL 0
-#define SDRAM_MODE_CAS SDRAM_CAS
-
int dram_init(void)
{
- u32 freq;
int rv;
rv = fmc_setup_gpio();
@@ -164,67 +114,7 @@ int dram_init(void)
return rv;
clock_setup(FMC_CLOCK_CFG);
-
- /*
- * Get frequency for NS2CLK calculation.
- */
- freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
-
- writel(
- CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
- | SDRAM_CAS << FMC_SDCR_CAS_SHIFT
- | SDRAM_NB << FMC_SDCR_NB_SHIFT
- | SDRAM_MWID << FMC_SDCR_MWID_SHIFT
- | SDRAM_NR << FMC_SDCR_NR_SHIFT
- | SDRAM_NC << FMC_SDCR_NC_SHIFT
- | SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
- | SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
- &STM32_SDRAM_FMC->sdcr1);
-
- writel(
- SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
- | SDRAM_TRP << FMC_SDTR_TRP_SHIFT
- | SDRAM_TWR << FMC_SDTR_TWR_SHIFT
- | SDRAM_TRC << FMC_SDTR_TRC_SHIFT
- | SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
- | SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
- | SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
- &STM32_SDRAM_FMC->sdtr1);
-
- writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_START_CLOCK,
- &STM32_SDRAM_FMC->sdcmr);
-
- udelay(200); /* 200 us delay, page 10, "Power-Up" */
- FMC_BUSY_WAIT();
-
- writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_PRECHARGE,
- &STM32_SDRAM_FMC->sdcmr);
-
- udelay(100);
- FMC_BUSY_WAIT();
-
- writel((FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_AUTOREFRESH
- | 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
-
- udelay(100);
- FMC_BUSY_WAIT();
-
- writel(FMC_SDCMR_BANK_1 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
- | SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
- << FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
- &STM32_SDRAM_FMC->sdcmr);
-
- udelay(100);
-
- FMC_BUSY_WAIT();
-
- writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_NORMAL,
- &STM32_SDRAM_FMC->sdcmr);
-
- FMC_BUSY_WAIT();
-
- /* Refresh timer */
- writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);
+ stm32_sdram_init();
/*
* Fill in global info with description of SRAM configuration
@@ -233,7 +123,6 @@ int dram_init(void)
gd->bd->bi_dram[0].size = CONFIG_SYS_RAM_SIZE;
gd->ram_size = CONFIG_SYS_RAM_SIZE;
-
return rv;
}
diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig
index b5457c6..046041a 100644
--- a/configs/stm32f746-disco_defconfig
+++ b/configs/stm32f746-disco_defconfig
@@ -43,3 +43,5 @@ CONFIG_CLK=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_FULL is not set
CONFIG_PINCTRL_STM32=y
+CONFIG_RAM=y
+CONFIG_STM32_SDRAM=y
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index ff09f22..61afd7a 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -16,3 +16,11 @@ config SPL_RAM
If this is acceptable and you have a need to use RAM drivers in
SPL, enable this option. It might provide a cleaner interface to
setting up RAM (e.g. SDRAM / DDR) within SPL.
+
+config STM32_SDRAM
+ bool "Enable STM32 SDRAM support"
+ depends on RAM
+ help
+ STM32F7 family devices support flexible memory controller(FMC) to
+ support external memories like sdram, psram & nand.
+ This driver is for the sdram memory interface with the FMC.
diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile
index 0e10249..ecb036d 100644
--- a/drivers/ram/Makefile
+++ b/drivers/ram/Makefile
@@ -6,3 +6,4 @@
#
obj-$(CONFIG_RAM) += ram-uclass.o
obj-$(CONFIG_SANDBOX) += sandbox_ram.o
+obj-$(CONFIG_STM32_SDRAM) += stm32_sdram.o
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
new file mode 100644
index 0000000..13f8964
--- /dev/null
+++ b/drivers/ram/stm32_sdram.c
@@ -0,0 +1,119 @@
+/*
+ * (C) Copyright 2017
+ * Vikas Manocha, <vikas.manocha at st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/fmc.h>
+#include <asm/arch/stm32.h>
+
+static inline u32 _ns2clk(u32 ns, u32 freq)
+{
+ u32 tmp = freq/1000000;
+ return (tmp * ns) / 1000;
+}
+
+#define NS2CLK(ns) (_ns2clk(ns, freq))
+
+/*
+ * Following are timings for IS42S16400J, from corresponding datasheet
+ */
+#define SDRAM_CAS 3 /* 3 cycles */
+#define SDRAM_NB 1 /* Number of banks */
+#define SDRAM_MWID 1 /* 16 bit memory */
+
+#define SDRAM_NR 0x1 /* 12-bit row */
+#define SDRAM_NC 0x0 /* 8-bit col */
+#define SDRAM_RBURST 0x1 /* Single read requests always as bursts */
+#define SDRAM_RPIPE 0x0 /* No HCLK clock cycle delay */
+
+#define SDRAM_TRRD NS2CLK(12)
+#define SDRAM_TRCD NS2CLK(18)
+#define SDRAM_TRP NS2CLK(18)
+#define SDRAM_TRAS NS2CLK(42)
+#define SDRAM_TRC NS2CLK(60)
+#define SDRAM_TRFC NS2CLK(60)
+#define SDRAM_TCDL (1 - 1)
+#define SDRAM_TRDL NS2CLK(12)
+#define SDRAM_TBDL (1 - 1)
+#define SDRAM_TREF (NS2CLK(64000000 / 8192) - 20)
+#define SDRAM_TCCD (1 - 1)
+
+#define SDRAM_TXSR SDRAM_TRFC /* Row cycle time after precharge */
+#define SDRAM_TMRD 1 /* Page 10, Mode Register Set */
+
+
+/* Last data in to row precharge, need also comply ineq on page 1648 */
+#define SDRAM_TWR max(\
+ (int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD)), \
+ (int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP)\
+ )
+
+
+#define SDRAM_MODE_BL_SHIFT 0
+#define SDRAM_MODE_CAS_SHIFT 4
+#define SDRAM_MODE_BL 0
+#define SDRAM_MODE_CAS SDRAM_CAS
+
+int stm32_sdram_init(void)
+{
+ u32 freq;
+
+ /*
+ * Get frequency for NS2CLK calculation.
+ */
+ freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
+
+ writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
+ | SDRAM_CAS << FMC_SDCR_CAS_SHIFT
+ | SDRAM_NB << FMC_SDCR_NB_SHIFT
+ | SDRAM_MWID << FMC_SDCR_MWID_SHIFT
+ | SDRAM_NR << FMC_SDCR_NR_SHIFT
+ | SDRAM_NC << FMC_SDCR_NC_SHIFT
+ | SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
+ | SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
+ &STM32_SDRAM_FMC->sdcr1);
+
+ writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
+ | SDRAM_TRP << FMC_SDTR_TRP_SHIFT
+ | SDRAM_TWR << FMC_SDTR_TWR_SHIFT
+ | SDRAM_TRC << FMC_SDTR_TRC_SHIFT
+ | SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
+ | SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
+ | SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
+ &STM32_SDRAM_FMC->sdtr1);
+
+ writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_START_CLOCK,
+ &STM32_SDRAM_FMC->sdcmr);
+ udelay(200); /* 200 us delay, page 10, "Power-Up" */
+ FMC_BUSY_WAIT();
+
+ writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_PRECHARGE,
+ &STM32_SDRAM_FMC->sdcmr);
+ udelay(100);
+ FMC_BUSY_WAIT();
+
+ writel((FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_AUTOREFRESH
+ | 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
+ udelay(100);
+ FMC_BUSY_WAIT();
+
+ writel(FMC_SDCMR_BANK_1 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
+ | SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
+ << FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
+ &STM32_SDRAM_FMC->sdcmr);
+ udelay(100);
+ FMC_BUSY_WAIT();
+
+ writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_NORMAL,
+ &STM32_SDRAM_FMC->sdcmr);
+ FMC_BUSY_WAIT();
+
+ /* Refresh timer */
+ writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);
+
+ return 0;
+}
--
1.9.1
More information about the U-Boot
mailing list