[U-Boot] [PATCH v2 07/18] stm32f7: sdram: use sdram device tree node to configure sdram controller
Vikas Manocha
vikas.manocha at st.com
Tue Apr 4 21:45:09 UTC 2017
Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
cc: Christophe KERELLO <christophe.kerello at st.com>
---
Changed in v2: None
arch/arm/dts/stm32f746-disco.dts | 10 +++
drivers/ram/stm32_sdram.c | 144 +++++++++++++++++++------------
include/dt-bindings/memory/stm32-sdram.h | 34 ++++++++
3 files changed, 135 insertions(+), 53 deletions(-)
create mode 100644 include/dt-bindings/memory/stm32-sdram.h
diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index 5846b0d..f098d2e 100644
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f746.dtsi"
+#include <dt-bindings/memory/stm32-sdram.h>
/ {
model = "STMicroelectronics STM32F746-DISCO board";
@@ -81,6 +82,15 @@
pinctrl-0 = <&fmc_pins>;
pinctrl-names = "default";
status = "okay";
+
+ mr-nbanks = <1>;
+ /* sdram memory configuration from sdram datasheet IS42S16400J */
+ bank1: bank at 0 {
+ st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_2
+ CAS_3 RD_BURST_EN RD_PIPE_DL_0>;
+ st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_60 TRAS_42 TRC_60 TRP_18
+ TRCD_18>;
+ };
};
&mac {
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
index 67d8855..eb1ab94 100644
--- a/drivers/ram/stm32_sdram.c
+++ b/drivers/ram/stm32_sdram.c
@@ -13,6 +13,31 @@
#include <asm/arch/fmc.h>
#include <asm/arch/stm32.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+struct stm32_sdram_control {
+ u8 no_columns;
+ u8 no_rows;
+ u8 memory_width;
+ u8 no_banks;
+ u8 cas_latency;
+ u8 rd_burst;
+ u8 rd_pipe_delay;
+};
+
+struct stm32_sdram_timing {
+ u8 tmrd;
+ u8 txsr;
+ u8 tras;
+ u8 trc;
+ u8 trp;
+ u8 trcd;
+};
+struct stm32_sdram_params {
+ u8 no_sdram_banks;
+ struct stm32_sdram_control sdram_control;
+ struct stm32_sdram_timing sdram_timing;
+};
static inline u32 _ns2clk(u32 ns, u32 freq)
{
u32 tmp = freq/1000000;
@@ -21,73 +46,53 @@ static inline u32 _ns2clk(u32 ns, u32 freq)
#define NS2CLK(ns) (_ns2clk(ns, freq))
-/*
- * Following are timings for IS42S16400J, from corresponding datasheet
- */
-#define SDRAM_CAS 3 /* 3 cycles */
-#define SDRAM_NB 1 /* Number of banks */
-#define SDRAM_MWID 1 /* 16 bit memory */
-
-#define SDRAM_NR 0x1 /* 12-bit row */
-#define SDRAM_NC 0x0 /* 8-bit col */
-#define SDRAM_RBURST 0x1 /* Single read requests always as bursts */
-#define SDRAM_RPIPE 0x0 /* No HCLK clock cycle delay */
-
-#define SDRAM_TRRD NS2CLK(12)
-#define SDRAM_TRCD NS2CLK(18)
-#define SDRAM_TRP NS2CLK(18)
-#define SDRAM_TRAS NS2CLK(42)
-#define SDRAM_TRC NS2CLK(60)
-#define SDRAM_TRFC NS2CLK(60)
-#define SDRAM_TCDL (1 - 1)
-#define SDRAM_TRDL NS2CLK(12)
-#define SDRAM_TBDL (1 - 1)
#define SDRAM_TREF (NS2CLK(64000000 / 8192) - 20)
-#define SDRAM_TCCD (1 - 1)
-
-#define SDRAM_TXSR SDRAM_TRFC /* Row cycle time after precharge */
-#define SDRAM_TMRD 1 /* Page 10, Mode Register Set */
-
-
-/* Last data in to row precharge, need also comply ineq on page 1648 */
-#define SDRAM_TWR max(\
- (int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD)), \
- (int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP)\
- )
-
#define SDRAM_MODE_BL_SHIFT 0
#define SDRAM_MODE_CAS_SHIFT 4
#define SDRAM_MODE_BL 0
-#define SDRAM_MODE_CAS SDRAM_CAS
+#define SDRAM_MODE_CAS 3
+
+#define SDRAM_TRDL 12
-int stm32_sdram_init(void)
+int stm32_sdram_init(struct udevice *dev)
{
u32 freq;
+ u32 sdram_twr;
+ struct stm32_sdram_params *params = dev_get_platdata(dev);
/*
* Get frequency for NS2CLK calculation.
*/
freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
+ debug("%s, sdram freq = %d\n", __func__, freq);
+
+ /* Last data in to row precharge, need also comply ineq on page 1648 */
+ sdram_twr = max(
+ max(SDRAM_TRDL, params->sdram_timing.tras
+ - params->sdram_timing.trcd),
+ params->sdram_timing.trc - params->sdram_timing.trcd
+ - params->sdram_timing.trp
+ );
writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
- | SDRAM_CAS << FMC_SDCR_CAS_SHIFT
- | SDRAM_NB << FMC_SDCR_NB_SHIFT
- | SDRAM_MWID << FMC_SDCR_MWID_SHIFT
- | SDRAM_NR << FMC_SDCR_NR_SHIFT
- | SDRAM_NC << FMC_SDCR_NC_SHIFT
- | SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
- | SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
- &STM32_SDRAM_FMC->sdcr1);
-
- writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
- | SDRAM_TRP << FMC_SDTR_TRP_SHIFT
- | SDRAM_TWR << FMC_SDTR_TWR_SHIFT
- | SDRAM_TRC << FMC_SDTR_TRC_SHIFT
- | SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
- | SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
- | SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
- &STM32_SDRAM_FMC->sdtr1);
+ | params->sdram_control.cas_latency << FMC_SDCR_CAS_SHIFT
+ | params->sdram_control.no_banks << FMC_SDCR_NB_SHIFT
+ | params->sdram_control.memory_width << FMC_SDCR_MWID_SHIFT
+ | params->sdram_control.no_rows << FMC_SDCR_NR_SHIFT
+ | params->sdram_control.no_columns << FMC_SDCR_NC_SHIFT
+ | params->sdram_control.rd_pipe_delay << FMC_SDCR_RPIPE_SHIFT
+ | params->sdram_control.rd_burst << FMC_SDCR_RBURST_SHIFT,
+ &STM32_SDRAM_FMC->sdcr1);
+
+ writel(NS2CLK(params->sdram_timing.trcd) << FMC_SDTR_TRCD_SHIFT
+ | NS2CLK(params->sdram_timing.trp) << FMC_SDTR_TRP_SHIFT
+ | NS2CLK(sdram_twr) << FMC_SDTR_TWR_SHIFT
+ | NS2CLK(params->sdram_timing.trc) << FMC_SDTR_TRC_SHIFT
+ | NS2CLK(params->sdram_timing.tras) << FMC_SDTR_TRAS_SHIFT
+ | NS2CLK(params->sdram_timing.txsr) << FMC_SDTR_TXSR_SHIFT
+ | NS2CLK(params->sdram_timing.tmrd) << FMC_SDTR_TMRD_SHIFT,
+ &STM32_SDRAM_FMC->sdtr1);
writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_START_CLOCK,
&STM32_SDRAM_FMC->sdcmr);
@@ -121,11 +126,39 @@ int stm32_sdram_init(void)
return 0;
}
+static int stm32_fmc_ofdata_to_platdata(struct udevice *dev)
+{
+ int ret;
+ int node = dev->of_offset;
+ const void *blob = gd->fdt_blob;
+ struct stm32_sdram_params *params = dev_get_platdata(dev);
+
+ params->no_sdram_banks = fdtdec_get_uint(blob, node, "mr-nbanks", 1);
+ debug("%s, no of banks = %d\n", __func__, params->no_sdram_banks);
+
+ fdt_for_each_subnode(node, blob, node) {
+ ret = fdtdec_get_byte_array(blob, node, "st,sdram-control",
+ (u8 *)¶ms->sdram_control,
+ sizeof(params->sdram_control));
+ if (ret)
+ return ret;
+
+ ret = fdtdec_get_byte_array(blob, node, "st,sdram-timing",
+ (u8 *)¶ms->sdram_timing,
+ sizeof(params->sdram_timing));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static int stm32_fmc_probe(struct udevice *dev)
{
#ifdef CONFIG_CLK
int ret;
struct clk clk;
+
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0)
return ret;
@@ -137,7 +170,10 @@ static int stm32_fmc_probe(struct udevice *dev)
return ret;
}
#endif
- stm32_sdram_init();
+ ret = stm32_sdram_init(dev);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -161,5 +197,7 @@ U_BOOT_DRIVER(stm32_fmc) = {
.id = UCLASS_RAM,
.of_match = stm32_fmc_ids,
.ops = &stm32_fmc_ops,
+ .ofdata_to_platdata = stm32_fmc_ofdata_to_platdata,
.probe = stm32_fmc_probe,
+ .platdata_auto_alloc_size = sizeof(struct stm32_sdram_params),
};
diff --git a/include/dt-bindings/memory/stm32-sdram.h b/include/dt-bindings/memory/stm32-sdram.h
new file mode 100644
index 0000000..4cd6c2b
--- /dev/null
+++ b/include/dt-bindings/memory/stm32-sdram.h
@@ -0,0 +1,34 @@
+#ifndef DT_BINDINGS_STM32_SDRAM_H
+#define DT_BINDINGS_STM32_SDRAM_H
+
+#define NO_COL_8 0x0
+#define NO_COL_9 0x1
+#define NO_COL_10 0x2
+#define NO_COL_11 0x3
+
+#define NO_ROW_11 0x0
+#define NO_ROW_12 0x1
+#define NO_ROW_13 0x2
+
+#define MWIDTH_8 0x0
+#define MWIDTH_16 0x1
+#define MWIDTH_32 0x2
+#define BANKS_2 0x0
+#define BANKS_4 0x1
+#define CAS_1 0x1
+#define CAS_2 0x2
+#define CAS_3 0x3
+#define RD_BURST_EN 0x1
+#define RD_BURST_DIS 0x0
+#define RD_PIPE_DL_0 0x0
+#define RD_PIPE_DL_1 0x1
+#define RD_PIPE_DL_2 0x2
+
+#define TMRD_1 0x1
+#define TXSR_60 60
+#define TRAS_42 42
+#define TRC_60 60
+#define TRP_18 18
+#define TRCD_18 18
+
+#endif
--
1.9.1
More information about the U-Boot
mailing list