[U-Boot] [PATCH v2 15/18] stm32f7: increase the max no of pin configuration to 70

[Vikas Manocha]

The number of pins to be configured could be more than 50 e.g. in case
of sdram controller, there are about 56 pins (32 data lines, 12 address
& some control signals).

Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
cc: Christophe KERELLO <christophe.kerello at st.com>
---
Changed in v2: None

 drivers/pinctrl/pinctrl_stm32.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c
index 378fbaf..8a4bc1c 100644
--- a/drivers/pinctrl/pinctrl_stm32.c
+++ b/drivers/pinctrl/pinctrl_stm32.c
@@ -7,6 +7,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define MAX_PINS_ONE_IP			70
 #define MODE_BITS_MASK			3
 #define OSPEED_MASK			3
 #define PUPD_MASK			3
@@ -93,7 +94,7 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node)
 static int stm32_pinctrl_set_state_simple(struct udevice *dev,
 					  struct udevice *periph)
 {
-	u32 pin_mux[50];
+	u32 pin_mux[MAX_PINS_ONE_IP];
 	struct fdtdec_phandle_args args;
 	int rv, len;
 
-- 
1.9.1