[U-Boot] [PATCH v4 10/19] arm: socfpga: Add misc support for Arria 10
Ley Foon Tan
ley.foon.tan at intel.com
Wed Apr 5 09:32:45 UTC 2017
Add misc support for Arria 10.
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
---
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/include/mach/misc.h | 6 +
arch/arm/mach-socfpga/misc_arria10.c | 258 ++++++++++++++++++++++++++++++
3 files changed, 265 insertions(+)
create mode 100644 arch/arm/mach-socfpga/misc_arria10.c
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index c494930..9c4617f 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -11,6 +11,7 @@ obj-y += misc.o timer.o reset_manager.o clock_manager.o \
fpga_manager.o board.o
obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += clock_manager_arria10.o \
+ misc_arria10.o \
reset_manager_arria10.o
obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
diff --git a/arch/arm/mach-socfpga/include/mach/misc.h b/arch/arm/mach-socfpga/include/mach/misc.h
index f344749..0b65783 100644
--- a/arch/arm/mach-socfpga/include/mach/misc.h
+++ b/arch/arm/mach-socfpga/include/mach/misc.h
@@ -22,4 +22,10 @@ void socfpga_fpga_add(void);
static inline void socfpga_fpga_add(void) {}
#endif
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+unsigned int dedicated_uart_com_port(const void *blob);
+unsigned int shared_uart_com_port(const void *blob);
+unsigned int uart_com_port(const void *blob);
+#endif
+
#endif /* _MISC_H_ */
diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c
new file mode 100644
index 0000000..a591a67
--- /dev/null
+++ b/arch/arm/mach-socfpga/misc_arria10.c
@@ -0,0 +1,258 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <altera.h>
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <ns16550.h>
+#include <watchdog.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/sdram_arria10.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/nic301.h>
+#include <asm/io.h>
+#include <asm/pl310.h>
+
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 0x08
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 0x58
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3 0x68
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 0x18
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 0x78
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3 0x98
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_SPL_BUILD)
+static struct pl310_regs *const pl310 =
+ (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
+ (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
+#endif
+
+static struct socfpga_system_manager *sysmgr_regs =
+ (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+/*
+ * DesignWare Ethernet initialization
+ */
+#ifdef CONFIG_ETH_DESIGNWARE
+void dwmac_deassert_reset(const unsigned int of_reset_id,
+ const u32 phymode)
+{
+ u32 reset;
+
+ if (of_reset_id == EMAC0_RESET) {
+ reset = SOCFPGA_RESET(EMAC0);
+ } else if (of_reset_id == EMAC1_RESET) {
+ reset = SOCFPGA_RESET(EMAC1);
+ } else if (of_reset_id == EMAC2_RESET) {
+ reset = SOCFPGA_RESET(EMAC2);
+ } else {
+ printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
+ return;
+ }
+
+ clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET],
+ SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
+ phymode);
+
+ /* Release the EMAC controller from reset */
+ socfpga_per_reset(reset, 0);
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD)
+/*
++ * This function initializes security policies to be consistent across
++ * all logic units in the Arria 10.
++ *
++ * The idea is to set all security policies to be normal, nonsecure
++ * for all units.
++ */
+static void initialize_security_policies(void)
+{
+ /* Put OCRAM in non-secure */
+ writel(0x003f0000, &noc_fw_ocram_base->region0);
+ writel(0x1, &noc_fw_ocram_base->enable);
+}
+
+int arch_early_init_r(void)
+{
+ initialize_security_policies();
+
+ /* Configure the L2 controller to make SDRAM start at 0 */
+ writel(0x1, &pl310->pl310_addr_filter_start);
+
+ /* assert reset to all except L4WD0 and L4TIMER0 */
+ socfpga_per_reset_all();
+
+ /* configuring the clock based on handoff */
+ /* TODO: Add call to cm_basic_init() */
+
+ /* Add device descriptor to FPGA device table */
+ socfpga_fpga_add();
+ return 0;
+}
+#else
+int arch_early_init_r(void)
+{
+ return 0;
+}
+#endif
+
+/*
+ * This function looking the 1st encounter UART peripheral,
+ * and then return its offset of the dedicated/shared IO pin
+ * mux. offset value (zero and above).
+ */
+static int find_peripheral_uart(const void *blob,
+ int child, const char *node_name)
+{
+ int len;
+ fdt_addr_t base_addr = 0;
+ fdt_size_t size;
+ const u32 *cell;
+ u32 value, offset = 0;
+
+ base_addr = fdtdec_get_addr_size(blob, child, "reg", &size);
+ if (base_addr != FDT_ADDR_T_NONE) {
+ cell = fdt_getprop(blob, child, "pinctrl-single,pins",
+ &len);
+ if (cell != NULL) {
+ for (; len > 0; len -= (2 * sizeof(u32))) {
+ offset = fdt32_to_cpu(*cell++);
+ value = fdt32_to_cpu(*cell++);
+ /* Found UART peripheral */
+ if (value == 0x0D)
+ return offset;
+ }
+ }
+ }
+ return -EINVAL;
+}
+
+/*
+ * This function looks up the 1st encounter UART peripheral,
+ * and then return its offset of the dedicated/shared IO pin
+ * mux. UART peripheral is found if the offset is not in negative
+ * value.
+ */
+static int is_peripheral_uart_true(const void *blob,
+ int node, const char *child_name)
+{
+ int child, len;
+ const char *node_name;
+
+ child = fdt_first_subnode(blob, node);
+
+ if (child < 0)
+ return -EINVAL;
+
+ node_name = fdt_get_name(blob, child, &len);
+
+ while (node_name) {
+ if (!strcmp(child_name, node_name))
+ return find_peripheral_uart(blob, child, node_name);
+
+ child = fdt_next_subnode(blob, child);
+ if (child < 0)
+ break;
+
+ node_name = fdt_get_name(blob, child, &len);
+ }
+
+ return -1;
+}
+
+/*
+ * This function looking the 1st encounter UART dedicated IO peripheral,
+ * and then return based address of the 1st encounter UART dedicated
+ * IO peripheral.
+ */
+unsigned int dedicated_uart_com_port(const void *blob)
+{
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+ if (node < 0)
+ return 0;
+
+ if (is_peripheral_uart_true(blob, node, "dedicated") >= 0)
+ return SOCFPGA_UART1_ADDRESS;
+
+ return 0;
+}
+
+/*
+ * This function looking the 1st encounter UART shared IO peripheral, and then
+ * return based address of the 1st encounter UART shared IO peripheral.
+ */
+unsigned int shared_uart_com_port(const void *blob)
+{
+ int node, ret;
+
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+ if (node < 0)
+ return 0;
+
+ ret = is_peripheral_uart_true(blob, node, "shared");
+
+ if (ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 ||
+ ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 ||
+ ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3)
+ return SOCFPGA_UART0_ADDRESS;
+ else if (ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 ||
+ ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 ||
+ ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3)
+ return SOCFPGA_UART1_ADDRESS;
+
+ return 0;
+}
+
+/*
+ * This function looking the 1st encounter UART peripheral, and then return
+ * base address of the 1st encounter UART peripheral.
+ */
+unsigned int uart_com_port(const void *blob)
+{
+ unsigned int ret;
+
+ ret = dedicated_uart_com_port(blob);
+
+ if (ret)
+ return ret;
+
+ return shared_uart_com_port(blob);
+}
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ const u32 bsel =
+ SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo));
+
+ puts("CPU: Altera SoCFPGA Arria 10\n");
+
+ printf("BOOT: %s\n", bsel_str[bsel].name);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+ return 0;
+}
+#endif
--
1.8.2.3
More information about the U-Boot
mailing list